What is the actual fuel consumption of the Kia Stonic automatic transmission?

1 Answers
OWyatt
07/29/25 6:45pm
The fuel consumption given by the Ministry of Industry and Information Technology is 5.4-6L per 100 kilometers, with the following explanations: 1. Kia Stonic's configuration: The Kia Stonic is equipped with a 1.4L naturally aspirated engine across all models, paired with either a 5-speed manual or a 6-speed automatic transmission. The maximum power outputs are 95 horsepower and 100 horsepower respectively, with a maximum torque of 132.4 Nm, which is sufficient to meet daily driving needs. 2. Cost-effectiveness: The Kia Stonic features a very fashionable and youthful exterior design that is highly attractive. The interior craftsmanship and configurations are also excellent. Combined with its relatively low fuel consumption, the overall cost-effectiveness of the vehicle is very high, making it a worthy choice.
Was this review help?
1
1
Share
More Forum Discussions

What does 86h on a tire mean?

The 86 in tire 86h represents the maximum load capacity of the tire, which is 530 kilograms. The H indicates the maximum speed rating of the tire, which is 210 kilometers per hour. It is essential to use tires according to their specified parameters to ensure safety. The importance of tires: The tires of a motor vehicle are crucial components as they are in direct contact with the road surface and work together with the vehicle's suspension to mitigate the impact experienced during driving. The role of tires: Automotive tires help ensure passenger comfort and smooth driving. A high-quality tire can significantly enhance the comfort and smoothness of the ride, making tires a vital component of any vehicle.
7
1
Share

What Causes the Rattling Noise at the Rear Right of a Car?

Car rear right rattling noise may be caused by items in the trunk or loose interior panels. Some vehicle models may experience interior panel resonance at certain speeds, which can also create rear noise. Below are specific causes and solutions: Check rear wheel suspension: When frequently driving on bumpy roads, the play in interior panels may increase, leading to rattling sounds. Besides inspecting trunk item security, it's also recommended to check the tightness of rear wheel suspension and driveshaft connections. Interior panel resonance: Rear noise is a common occurrence, especially when the trunk is relatively empty. Some MPV models, SUV models, and station wagons are particularly prone to rear rattling. When these vehicles' trunks are empty, interior panels may resonate and produce noise.
17
0
Share

What Causes Uneven Tire Wear on One Side of the Truck's Front Wheels?

Truck front wheels experiencing uneven tire wear on one side is primarily due to inaccurate wheel alignment, which includes four key parameters: caster angle, kingpin inclination, camber angle, and toe angle. Any abnormality in these parameters can lead to uneven tire wear. Below are specific causes and solutions: Specific Causes: Steering gear malfunction can also cause uneven tire wear and may even lead to vehicle deviation; uneven or deformed chassis can result in uneven tire wear, a common issue in some accident-damaged vehicles; mixing tires of different specifications can cause uneven wear if the four wheels cannot operate harmoniously in a stable environment; aggressive acceleration, sharp turns, and sudden braking can also contribute to uneven tire wear. Solutions: Uneven tire wear on truck front wheels can be addressed by adjusting the camber angle and toe angle. Adjusting the camber angle can be achieved by inspecting and adjusting the wheel hub bearings, where the tightness of the bearings can be modified to alter the camber angle. For front wheels with independent suspension, the camber angle can be adjusted by adding or removing shims between the upper control arm shaft and the fixed bracket.
6
5
Share

Should I replace tires that are eight years old but have been driven very little?

Tires that are eight years old but have been driven very little are recommended for replacement, as tire rubber will age. Generally, the service life of tires is around 3 years or 80,000 kilometers. How to judge tire rubber aging: In fact, most family cars don't drive many kilometers daily, so not many tires wear down to the tread wear indicators. However, tire aging is quite common. The most typical sign of tire rubber aging is the appearance of cracks and numerous fine fissures on the tire surface, a phenomenon known as tire cracking. Tire service life: Since tire rubber requires a certain level of hardness, a manufacturing process called vulcanization is applied during production. Vulcanized rubber gains increased hardness but will deteriorate over time. Therefore, the typical service life of tires is about 3 years.
5
2
Share

What are the differences between National III and National IV?

National III emission standards and National IV emission standards differ primarily in the stricter requirements for vehicle pollutant emissions. Differences: The National III emission standard was proposed in 2006 and implemented nationwide on July 1, 2007. It is equivalent to the Euro III emission standard, but compared to Euro III, National III places more emphasis on the emission standards for vehicles at -7 degrees Celsius. Additionally, new vehicles are required to be equipped with an On-Board Diagnostics (OBD) system. The National III engine incorporates improvements to the internal structure of the National II engine, including components such as the combustion chamber and intake/exhaust passages, exhaust manifold, valves, camshaft, pistons, and corresponding auxiliary mechanisms. The upgraded National III engine features higher precision in its components without affecting performance. Upgrade to National IV: Three years later, the National IV emission standard was implemented nationwide on July 1, 2010, representing an upgrade from the National III standard. It reduced pollutant emissions by approximately 50%. Currently, the National VI standard is gradually being rolled out across China, and many regions have already issued bans on vehicles meeting the National III emission standards.
16
1
Share

What car has a plus sign as its logo?

The car with a plus sign as its logo is Chevrolet. The Chevrolet logo resembles a bow tie, symbolizing the brand's generosity, grandeur, and elegance. Meaning of the logo: Its English name (Chevrolet) is derived from the name of a Swiss race car driver and engineer; the black plus sign, similar to Honda's red badge, represents performance vehicles, but the ones commonly seen in China are usually stickers added by the owners themselves. Superior cost performance: Chevrolet positions itself as the preferred brand for striving young people and young families in the Chinese market. Chevrolet can be considered a typical American car, with relatively high reliability in quality, and its models are mainly characterized by their cost performance.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.