What is the actual fuel consumption of the Jetour X70?

2 Answers
RileyLynn
07/24/25 9:53pm
Manual transmission models consume 7.9 liters per 100 kilometers, while automatic transmission models consume 8.6 liters per 100 kilometers. More details about the Jetour X70 are as follows: 1. Detail one: The Jetour X70 is a mid-size SUV under the Jetour brand, with a wheelbase of 2745mm, and dimensions of 4720mm in length, 1900mm in width, and 1695mm in height. 2. Detail two: The Jetour X70 is equipped with a 1.5-liter turbocharged engine, which delivers 156 horsepower and a maximum torque of 230 Nm. The engine's maximum power is achieved at 5500 rpm, and the maximum torque is available between 1750 to 4000 rpm. 3. Detail three: This engine features DVVT technology and multi-point fuel injection, and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. The dual-clutch transmission is developed based on manual transmission technology, and its structure is similar to that of a manual transmission.
Was this review help?
4
4
Share
StCorbin
08/10/25 2:49pm
I've been driving the Jetour X70 for half a year, mainly for daily urban commuting, and feel its fuel consumption is slightly higher than the official data. My actual measurement shows an average of 8.5 to 9 liters per 100 km in the city. It can spike to over 10 liters when stuck in traffic or using air conditioning. On highways, it's much more fuel-efficient, staying steady at around 7 liters. The car's substantial weight makes it consume more fuel during acceleration, especially when stomping on the gas pedal. I usually pay attention to gently pressing the accelerator and braking early, which can save about half a liter of fuel. Regular maintenance is also crucial; for example, replacing the air filter with a clean one and using high-quality engine oil can improve engine efficiency. Fuel consumption tends to be higher in winter due to preheating. Overall, it's at a medium level among SUVs. Planning routes to avoid congestion can save a lot of money and safety risks. To save money, try combining these experiences and experimenting more.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What to Do When the Door Cable Is Broken and Won't Open?

First, try using the car key to unlock and then lock the door, repeating this process twice; Then locate the central locking button on the left front door trim panel of the driver's compartment, press the unlock button, and try opening the door again.
9
0
Share

How to Adjust the Brightness of the Car Display Screen?

Use the adjustment wheel on the left front panel of the driver's cabin to adjust the brightness of the dashboard and central control screen. Press the wheel button on the left front side of the cockpit to adjust the headlight height. To turn off the screen, you can start and then turn off the engine while sitting in the car, open and then close the driver's door. At this point, the main screen will turn off, and the dashboard will also turn off after a while.
18
4
Share

How to Restore Sound After Car Goes Silent?

Locate the volume adjustment knob in the center console of the vehicle; rotate the switch knob to the right and adjust it to the maximum; Press the voice control button on the right side of the multifunction steering wheel and hold it for five seconds; Press the vehicle's one-touch start button to turn off the engine, then press the button again to start the engine. At this point, the vehicle's sound will be restored.
19
3
Share

What is the procedure for replacing a driver's license at the DMV?

Motor vehicle drivers should bring the required materials to the vehicle management office where the driver's license was originally issued to apply for a replacement. The vehicle management office will process the replacement within one working day after approval. Materials required for replacement: Bring two copies of ID card, two 1-inch color passport photos without a hat, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examination is also available at the DMV). The replacement and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses have no points in the current scoring cycle, or holders of other driver's licenses have less than 12 points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses who have points in the current scoring cycle, as well as holders of other driver's licenses who have caused a traffic accident resulting in death and bear equal or greater responsibility but have not had their driver's license revoked, and have participated in the inspection education; The applicant has no pending road traffic safety violations or traffic accidents; The applicant's physical condition meets the driving license requirements; The driver's license is not legally seized, detained, suspended, revoked, canceled, or rescinded.
15
4
Share

What to Do When the Nissan Sylphy's Battery is Dead and Won't Start

Need to bring the two cars as close together as possible. Generally, the car battery is located under the front hood. The two cars should be parked side by side or head to head. Next, locate the batteries of both cars, identify the positive and negative terminals, remove the terminal covers, and use the red battery cable clamp to attach to the positive terminal. Then, attach the red clamp first, followed by the black one. Once all four terminals are connected, the jump-start setup is complete, and you can proceed to start the car with the dead battery.
1
5
Share

How to Make a Turn Correctly?

After turning on the turn signal, slow down and apply the foot brake. After completing the turn, engage the accelerator. When shifting gears, press the clutch, but remember to apply the brake before pressing the clutch. When shifting gears, press the clutch to downshift to 2nd or 3rd gear, then immediately release the clutch without keeping it pressed. After downshifting to 2nd gear, release the clutch, turn the steering wheel, and place your foot on the accelerator. Maintain the speed, steer the wheel, and complete the turn smoothly.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.