What is the actual fuel consumption of the Hongqi HS5?

2 Answers
MatthewAnn
07/30/25 2:28am
Hongqi HS5 has a total of 7 models on sale. Among them, the Hongqi HS5-2022-2.0T-Zhilian Qiling 4WD Edition, Zhilian Qixiang 4WD Legou Edition, and Modified 2.0T-Zhilian Qixiang 4WD Edition, equipped with a 224-horsepower engine, have an NEDC fuel consumption of 8.2L per 100km. The Hongqi HS5-2022-2.0T-Zhilian Qiling Edition, Zhilian Qixiang Legou Edition, Zhilian Qiyue Edition, and Modified 2.0T-Zhilian Qixiang Edition, also equipped with a 224-horsepower engine, have an NEDC fuel consumption of 7.7L per 100km. All Hongqi HS5 models have the same fuel tank capacity. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 224-horsepower engine, the fuel tank capacity is 64L, and the distance that can be covered with a full tank is 64/8.2*100=780km. For models equipped with a 224-horsepower engine, the fuel tank capacity is 64L, and the distance that can be covered with a full tank is 64/7.7*100=831km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
1
1
Share
LaAlana
08/15/25 8:37am
I've been driving the Hongqi HS5 for several years, and as an experienced driver, I believe the actual fuel consumption depends on the situation. The official data shows about 8.5L per 100km in urban conditions and around 7L on highways, but in reality, the actual consumption often ranges between 10 to 12L, varying by driver. I've noticed that in heavy city traffic with frequent stops, it can go up to 13L, while maintaining a steady speed on highways can bring it down to 8L. The reason lies in the HS5's 2.0T engine, which delivers ample horsepower, and the SUV's high curb weight—frequent stops and starts consume more fuel. Driving habits play a crucial role: gentle acceleration, maintaining a steady speed, and avoiding sudden braking can significantly reduce fuel consumption. Regularly checking tire pressure and keeping up with maintenance also helps save fuel. The comfort and visibility of an SUV are its advantages, but the higher fuel consumption is something you have to accept. Choosing suitable routes can make driving more economical.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

What is the tire model for the Bluebird?

The Bluebird has two tire models: 215/50R17 and 195/60R16. The first number 215 indicates the tire width is 215MM, 50 represents the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width. The letter R stands for radial tire, and 17 denotes the rim diameter is 17 inches. The Bluebird has a top speed of 185km/h, accelerates from 0-100km/h in 12.1 seconds, and has a fuel consumption of 5.2L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
19
2
Share

Where is the engine speed sensor located on the Volkswagen CC?

The engine speed sensor on the Volkswagen CC is generally installed on the blade flywheel. Introduction to the speed sensor: The speed sensor on the engine is a Hall sensor, which operates based on the signal teeth on the flywheel. It converts magnetic signals into electrical signals through semiconductor components. This type of sensor can function without direct contact with the measured object. Principle of the speed sensor: The vehicle speed sensor on the transmission can directly convert mechanical signals into electrical signals. The sensor meshes with the main reduction gear of the transmission via a gear. The rotation of the main reduction gear drives the rotation of the sensor gear, thereby outputting the speed signal.
7
3
Share

How to Replace the Focus Air Conditioning Filter?

Method for replacing the Focus air conditioning filter: 1. Pinch the two yellow clips and twist them downward; when reinstalling, simply press them back into place. 2. Remove the air conditioning filter cover; when reinstalling, align it and push it back into position. 3. Pull out the old air conditioning filter. The installation angle of the filter is quite tricky, but there's no need to worry too much about the filter deforming during removal or installation—it will naturally expand into place without affecting performance. Functions of the air conditioning filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. Separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and lasting moisture absorption. 4. Prevents car windows from fogging up, ensuring clear visibility and safe driving; provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; effectively sterilizes and deodorizes. 5. Maintains clean cabin air, preventing bacterial growth and creating a healthy environment; effectively separates solid impurities such as dust, filter powder, and abrasive particles from the air; effectively blocks pollen, ensuring occupants do not experience allergic reactions that could compromise driving safety.
2
5
Share

When does the Passat start burning engine oil?

Generally, the Passat starts burning engine oil after 100,000 kilometers. If a car burns engine oil, there will be a series of symptoms. Blue smoke appears: Thick blue smoke comes out of the exhaust pipe, and then disappears after a while. If this phenomenon reappears the next morning or the morning after, it indicates that the vehicle is burning engine oil. This is called cold-engine oil burning. Blue smoke from the exhaust pipe: When the vehicle is in motion or idling, if the driver steps hard on the accelerator and a large amount of blue smoke comes out of the exhaust pipe, it means the engine oil burning is already quite severe. This is called acceleration oil burning.
13
5
Share

What are the causes of Range Rover Sport suspension failure?

The causes of Range Rover Sport suspension failure are as follows: Possible causes of the failure: It may be due to improper adjustment of the left front height sensor, with the signal out of range. The left front height sensor linkage is disconnected. The left front height sensor bracket is deformed. The left front height sensor is loose or detached. There is a wiring fault in the left front height sensor. The left front height sensor itself is faulty. Methods to troubleshoot the failure: Check that the installation position of the left front height sensor is normal, with no detachment or looseness, and the bracket is not deformed. Check that the wiring is normal. To further determine the height sensor, swap the left front height sensor with the right front height sensor, clear the fault code, and test drive.
4
0
Share

What is the RPM of the Volkswagen New Lavida at 120 km/h on the highway?

The RPM of the Volkswagen New Lavida at 120 km/h on the highway is 2500 rpm. Introduction to the tachometer: The tachometer is divided into several zones. The white scale area indicates the safe RPM range, while the red scale area represents the dangerous RPM range. Some models also have a green zone, which indicates the most fuel-efficient RPM range for the engine. RPM ranges for cars: When starting the vehicle, the engine RPM typically reaches around 1200 to 1500 rpm. This is because a lower RPM might cause the engine to stall during startup. Once the engine reaches normal operating conditions, the RPM will drop, usually settling around 800 rpm. During gear shifts, the RPM is usually around 2000 to 2500 rpm.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.