What is the actual fuel consumption of the Honda 1.5 XR-V?

Which province does the Min license plate belong to?

Min license plates belong to Fujian Province. The functions of license plates are: 1. Vehicle identification; 2. Indicating the vehicle's region of registration; 3. Enabling access to the owner's and vehicle's registration information through the plate number. Types of license plates include: 1. White plates representing military and police vehicles; 2. Blue plates for ordinary small vehicles with fewer than 7 seats; 3. Yellow plates for ordinary large vehicles; 4. Black plates for foreign enterprise vehicles. The installation method for license plates is: 1. Take out the license plate screws and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them with tools; 3. Cover the anti-theft caps and press them into place.

20

5

Share

How many points will be deducted for driving or parking a motor vehicle in violation of regulations?

According to the "Scoring Standards for Road Traffic Safety Violations", driving or parking a motor vehicle in violation of regulations will result in a deduction of 3 points for each violation. Here is the detailed information: Legal Information: According to Article 90 of the Road Traffic Safety Law of the People's Republic of China, motor vehicle drivers who violate road traffic safety laws and regulations will be given a warning or fined. Precautions: Whether on expressways or urban roads, electronic monitoring and traffic police have been deployed in every corner of the road. It is important to standardize driving behavior, pay attention to and comply with traffic regulations while driving, and be a civilized and law-abiding citizen.

12

2

Share

What does VIN code mean?

VIN code refers to the Vehicle Identification Number, which consists of 17 characters and contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The functions of the VIN number are: 1. To confirm the identity of the vehicle; 2. To check traffic violations; 3. To query the vehicle's batch; 4. To accurately locate parts. The VIN code can be found in the following locations: 1. On the left side of the dashboard; 2. On the lower left side of the windshield; 3. On the vehicle's nameplate; 4. On the body near the upper part of the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the door edge pillars connected to the door lock pillar.

11

2

Share

How much fuel can a scooter motorcycle hold?

How much fuel a scooter motorcycle can hold depends on the specific model: ordinary cross-type motorcycles can typically hold about 10 to 14 liters; underbone motorcycles can hold approximately 3.5 to 4 liters. A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine, and steered by handlebars to control the front wheel. It comes in two or three-wheel configurations, offering light weight, agility, and high speed, making it widely used for patrols, passenger and cargo transport, and as sports equipment. A motorcycle consists of an engine, transmission system, running gear, braking system, and electrical instrumentation. The transmission system of a motorcycle includes primary reduction, clutch, gearbox, and secondary reduction.

6

4

Share

What Could Be the Reasons for ABS Failure in a Sedan?

ABS light can illuminate in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections between system wires or faulty ABS relay contacts, leading to system failure. Solution: Inspect wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. Another possible cause is insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connector contact of the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gap has widened. Replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also cause this issue. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal and push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's path, posing significant safety risks.

15

1

Share

Where is the fuel filter located in the Honda Vezel?

The fuel filter in the Honda Vezel is located inside the fuel tank. The fuel filter, also known as the gasoline filter or fuel filter, is a wear-prone component among automotive parts and requires frequent replacement. The fuel filter is used to filter gasoline and is a crucial part of the vehicle. Taking the 2020 Honda Vezel as an example, its body dimensions are: length 4328mm, width 1772mm, height 1605mm, with a wheelbase of 2610mm and a curb weight of 1227kg. The 2020 Honda Vezel features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 6-speed manual transmission.

10

5

Share

What is the actual fuel consumption of the Honda 1.5 XR-V?

Which province does the Min license plate belong to?

How many points will be deducted for driving or parking a motor vehicle in violation of regulations?

What does VIN code mean?

How much fuel can a scooter motorcycle hold?

What Could Be the Reasons for ABS Failure in a Sedan?

Where is the fuel filter located in the Honda Vezel?

What is the wheelbase of the Ford Edge?

How to Close the Windows After Turning Off the MG6?

Does the Bora have a rear anti-collision beam?

What is the reason for the clicking sound when the Qashqai turns?