What is the actual fuel consumption of the Haval H9?

1 Answers
DelSteven
07/30/25 8:49am
Haval H9 has a combined fuel consumption of 9.9L/100km. The actual fuel consumption of a car may vary slightly depending on each individual's driving habits and skills. More stable driving habits result in lower fuel consumption, while frequent aggressive driving, overtaking, and other high-RPM operations will appropriately increase fuel consumption. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may require higher fan speeds and lower temperatures to achieve a comfortable effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
Was this review help?
2
4
Share
More Forum Discussions

Should You Use Internal or External Air Circulation When Turning on the Car Heater?

When using the car heater, start with internal circulation until the interior warms up, then switch to external circulation. It's recommended to primarily use internal circulation with occasional external circulation, alternating between the two. This ensures a warm interior while preventing excessive carbon dioxide buildup, which could affect driving safety. Internal circulation closes the external air intake grille, completely sealing the car interior to recirculate the existing air. However, prolonged use can lead to decreased oxygen levels as temperatures rise, potentially causing hypoxia in passengers. Therefore, it's advisable to periodically switch to external circulation to refresh the air. External circulation relies on an electric heating element to warm incoming air. For quick heating in winter, start the engine and drive normally to allow warm-up. When the coolant temperature gauge reaches the midpoint, turn on the heater with internal circulation. Using internal circulation allows the HVAC system to rapidly cool or heat the cabin. This method not only warms the interior quickly but also avoids placing extra load on the engine, resulting in better fuel efficiency.
16
5
Share

What is the Oil Trapping Phenomenon?

During normal operation of a hydraulic pump, the varying sealed volume should be connected to the corresponding oil suction and discharge chambers of the oil distribution device. The "occluded volume" formed due to the pump's structure (not connected to the suction or discharge chambers) is called the oil trapping phenomenon. The related introduction is as follows: Consequences of Oil Trapping: "Oil trapping" causes the liquid to be compressed, leading to increased pressure or the creation of a partial vacuum resulting in cavitation. The consequences include increased power loss, elevated oil temperature, noise and vibration, affecting the smooth operation and lifespan of the pump. Working Process of a Hydraulic Pump: The oil trapping phenomenon and the working process of a positive displacement hydraulic pump are generally divided into three stages: first, the volume of the suction chamber increases to create a vacuum and draw in the liquid (suction stage), then it goes through an intermediate stage (transition stage where neither suction nor discharge occurs), and finally, the volume of the discharge chamber decreases to expel the liquid into the system (discharge stage).
12
3
Share

What Are the Reasons for Difficult Gear Shifting in Manual Transmission?

Here are the related explanations for the reasons of difficult gear shifting in manual transmission: Operational Factors: Incorrect operation by the driver, such as speed and gear mismatch, can lead to difficulty in gear shifting. This requires the driver to gain experience and improve their skills, after which the problem can naturally be resolved. Clutch Factors: Rust on the transmission input shaft can prevent the clutch driven disc from moving normally, causing poor return and making it difficult for the gear to engage properly. Clutch malfunctions, such as insufficient clutch release travel, can result in incomplete clutch disengagement, making it hard to shift gears. In such cases, it is necessary to visit a repair shop to adjust the release travel. Excessive clutch gear lock force can also cause difficulty in shifting in and out of gears, requiring adjustment of the clutch cable and gear lock at a repair shop. Transmission Factors: Old transmission oil needs to be replaced. If not replaced in time, its lubricating effect will decrease, leading to difficulty in gear shifting.
17
2
Share

What does Skoda Rapid mean?

Skoda "RAPID" is known as "Xin Rui" in Chinese, an A-class entry-level sedan launched by SAIC Skoda. In the naming of this car, "Xin" symbolizes the first light of dawn, representing new hope and new strength; "Rui" means moving forward courageously and forging ahead with determination. Below is more information about the Skoda Xin Rui: Configuration: The Skoda Xin Rui is a car developed by Volkswagen based on the PQ25 platform. It comes standard with ABS anti-lock braking system and EBD electronic brake-force distribution system. Power: The Skoda Rapid is equipped with a 1.5-liter naturally aspirated engine, featuring front-engine, front-wheel-drive layout, electric power steering, and a handbrake for parking. Body dimensions: The Skoda Rapid has a body length, width, and height of 4512mm, 1706mm, and 1469mm respectively, with a wheelbase of 2603mm.
17
5
Share

What is a Center-Axle Trailer?

Center-axle trailers are a type of full trailer where the axles are positioned in the middle. Due to stability concerns, full trailers are explicitly prohibited from driving on highways by national regulations. Relevant details are as follows: Introduction to Center-Axle Trailers: A trailer with two axles, both placed in the middle of the trailer, is called a center-axle trailer. Because both axles are located in the middle, a center-axle trailer cannot maintain balance on its own and requires support legs to 'stand' when not connected to another vehicle. Driving of Center-Axle Trailers: The towing device cannot move vertically (relative to the trailer), and the axle is located close to the trailer's center of gravity (under uniform load). This type of vehicle exerts only a small vertical static load on the towing vehicle, not exceeding 10% of the trailer's mass or 10,000N (whichever is smaller). One or more axles can be driven by the towing vehicle.
16
2
Share

How to properly turn off and power down the Changan CS75 when parking?

First, press the brake pedal to bring the vehicle to a smooth and steady stop; Then shift the gear from D (Drive) to N (Neutral); Next, engage the parking brake, being careful not to apply excessive force (for electronic parking brakes, simply pull up the switch); Release the foot brake, but do not turn off the vehicle's power at this point (this is to ensure the car is completely stationary under the parking brake's effect, preventing the P (Park) gear from locking up); Continue pressing the foot brake and shift the gear from N (Neutral) to P (Park); Finally, release the foot brake and press the one-touch start/stop button to power off the vehicle, completing the shutdown process.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.