What is the actual fuel consumption of the Haval F7X 4WD version?

2 Answers
JulianaRose
07/30/25 2:32am
Haval F7X 4WD version has a combined fuel consumption of 6.9L/100km. The above is the NEDC combined fuel consumption, which is the comprehensive fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, around 8.5L. The level of car fuel consumption is directly related to five major factors, namely driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that will increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement consume more fuel than those with smaller displacement because larger displacement generally means greater power, requiring more gasoline to burn and perform work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires larger driving torque. Road conditions: Dirt roads, muddy roads, soft roads, mountain roads, etc. Driving on these roads with greater resistance will increase fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easy to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, low temperature will cause the engine computer to control the engine to warm up at higher RPM, which will also increase fuel consumption.
Was this review help?
1
2
Share
Tessa
08/16/25 8:43am
I am the owner of a Haval F7X 4WD version, and I usually drive it for daily commuting in the city, with fuel consumption generally ranging from 10 to 12 liters per 100 kilometers. When encountering heavy traffic or frequent stops at traffic lights, it easily exceeds 12 liters; on highways, it can drop to around 8 liters, which is quite reassuring. I think the 4WD system adds significant weight to the car, and since I sometimes step on the gas pedal hard when in a hurry, the fuel consumption gets even higher. I recommend driving in eco mode, using the air conditioning less, and regularly checking tire pressure to keep fuel consumption stable at around 9 liters. Also, fuel quality makes a big difference—higher-grade fuel makes the ride smoother. Don’t underestimate the impact of load; a full car climbing hills can push fuel consumption up to 13 liters, but overall, it’s decent for long-distance driving. Keep up with maintenance, and the fuel consumption won’t fluctuate much.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

How Many Kilometers Should the Spark Plugs of a Van Be Replaced?

Under normal maintenance conditions, the spark plugs of a van should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the guidelines in the user manual. The following standards can be referenced for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for any external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order and secure the cover.
4
1
Share

What is a Tire Blowout Safety Device?

Tire Blowout Safety Device is a brand-new automotive passive safety product that effectively ensures the safety of passengers and the vehicle in the event of a tire blowout. It represents the fourth generation of automotive passive safety protection systems, following seat belts, ABS, and airbags. Functions of the Blowout Safety Device: It promptly releases the drastically increased motion resistance of the wheel, thereby maintaining control over the vehicle's direction and preventing loss of steering control due to a sudden drop in tire pressure on one side. The device is easy and reliable to install without altering the original vehicle structure; it is sturdy and lightweight, preserving the original wheel balance; and it is resistant to corrosion, cold, and heat, without affecting fuel consumption. Principle of the Blowout Safety Device: Through calculations and mathematical simulations, it has been determined that within 0.3 seconds of a tire blowout at a speed of 100 km/h, the friction, lateral forces, and other forces generated between the blown-out tire and the ground increase to more than 33 times their original levels. It is precisely these amplified forces that cause the vehicle to lose directional control, bounce up and down, sway side to side, and potentially roll over, leading to unavoidable accidents. When a vehicle equipped with this device experiences a tire blowout, the safety device, acting on the inner surface of the tire, synchronizes its rotation with the tire by utilizing the aforementioned 33-fold increase in friction and lateral forces. Meanwhile, the inner ring, under the rotational force of the outer ring, decelerates relative to the wheel rim, allowing the rim to maintain the original rotational speed of the wheel.
8
3
Share

What benefits does the Dragon Card Auto Card include?

Regarding the benefits of the Dragon Card Auto Card, the details are as follows: Benefit content: Dragon Card Auto Card customers who meet the following conditions by swiping the card can enjoy a discounted car wash service once a week at designated car wash outlets. Dragon Card Auto Gold Card: When the car wash service's retail price is equal to or below the specified amount, customers can enjoy the car wash service without any payment; when the car wash service's retail price exceeds the specified amount, the excess part will be paid using the Auto Card points (exchange rate of 4‰), and cash payment will be required if the points balance is insufficient. Dragon Card Auto Platinum Card: When the car wash service's retail price is equal to or below the specified amount, customers can enjoy the car wash service without any payment; when the car wash service's retail price exceeds the specified amount, the excess part will be paid using the Auto Card points (exchange rate of 4‰), and cash payment will be required if the points balance is insufficient.
20
1
Share

Is the 4G15 a Mitsubishi engine?

4G15 is a Mitsubishi engine. Here is an introduction to Mitsubishi engines: Mitsubishi 4G Engine: Mitsubishi engines refer to the Mitsubishi 4G series engines. The Mitsubishi 4G engine is a 1834cm3 displacement engine developed by Mitsubishi, which adopts the GDI (gasoline-direct-injection) technology, meaning gasoline direct injection into the cylinder. By injecting gasoline directly into the cylinder, it achieves high-response and high-precision fuel control. Performance Introduction: The 4G9 series engines are mature products currently mass-produced by Mitsubishi Motors in Japan, achieving world-leading levels in structure, performance, reliability, and other aspects. The main advantages of the product: compact structural design, compared to engines of the same displacement, it has smaller external dimensions and lighter weight.
15
4
Share

Why do turbocharged engines require 95-octane gasoline?

Turbocharged engines require 95-octane gasoline because they have a high compression ratio, which necessitates the use of higher-octane fuel. 95-octane gasoline is composed of 95% isooctane and 5% n-heptane. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum and is used as fuel. Turbocharging is a technology that utilizes the exhaust gases from an internal combustion engine to drive an air compressor, thereby increasing the engine's air intake and consequently enhancing its power and torque. Turbocharging systems are categorized into constant-pressure turbocharging systems and pulse turbocharging systems.
7
2
Share

What is the equivalent displacement for 163 horsepower?

163 horsepower (ps) = 119.8862963 kilowatts (kW) 1 horsepower = 0.7354987 kW. The following is an introduction to automobile engines: Engine: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, an internal combustion engine usually converts chemical energy into mechanical energy. The term engine can refer to both the power generation device and the entire machine including the power device. External Combustion Engine: An external combustion engine burns its fuel outside the engine. It was invented in 1816 by R. Stirling of Scotland, hence it is also called a Stirling engine. The engine converts the thermal energy generated by this combustion into kinetic energy. The steam engine improved by Watt is a typical example of an external combustion engine. When a large amount of coal is burned to generate thermal energy that heats water into a large amount of steam, high pressure is created. This high pressure then drives mechanical work, thereby completing the conversion of thermal energy into kinetic energy.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.