What is the actual fuel consumption of the Haima S7?

1 Answers
Max
07/30/25 2:29am
The actual fuel consumption of the Haima S7 is: 7.5 to 8.8L/100km. Since 2012, Haima Motors has adopted a new naming convention for its models, with sedans starting with "M" and SUVs starting with "S". Methods to reduce fuel consumption: 1. Correctly adjust tire inflation pressure: Proper tire pressure can reduce rolling resistance and lower fuel consumption. Additionally, a tire pressure slightly higher than the recommended value (+0.2bar) can also save fuel. 2. Use in-car auxiliary electrical equipment moderately: Using certain electrical devices can significantly increase fuel consumption, such as the air conditioning system's cooling function. If the heating purpose has been achieved, the seat heater should be turned off promptly. The windshield heater should also be turned off when there is no fog or ice on the rear window. 3. Use gears correctly: Match the gear to the appropriate speed; avoid high-speed low-gear or low-speed high-gear driving. Shift gears in advance, ensuring the speed corresponds to the gear appropriately, and avoid driving at high speeds in low gears or low speeds in high gears.
Was this review help?
3
2
Share
More Forum Discussions

How many kilometers can a Volkswagen Touran run?

It depends on individual usage conditions. Here is an introduction to the Touran: The Touran is a new car born in 2003 on the Volkswagen PQ35 platform. This time entering the domestic market, Shanghai Volkswagen has specially created a new concept of MPS (Multi-Purpose Sedan) for it. How long can a Touran run on a full tank of fuel: To know how many kilometers a Touran can run on a full tank of fuel, first, you need to understand how many liters of fuel the Touran's tank holds. Secondly, you need to know the actual average fuel consumption per 100 kilometers of the 1.4T turbocharged engine equipped in the Touran. As a German compact MPV, the official fuel tank capacity is 60L, and the safe refueling capacity is approximately 55L.
17
1
Share

How to turn off the air suspension when changing tires on a BMW 740?

No need to turn it off as there are upper and lower limit stops. Below is the working principle of air suspension: The working principle of air suspension is to adjust vehicle height by controlling air pressure. Its main components include air struts, air bags, control system, air tank, air pump, and air line connectors. These components are indispensable and together form the air suspension system. Below are instructions regarding the BMW 740's air suspension: No need to turn it off as there are upper and lower limit stops. It's fine not to turn it off. After lifting the vehicle, the rear will lower, but it will automatically rise back up about 30 seconds after starting the engine.
8
4
Share

What are the dimensions of the Nissan Tiida's body?

Nissan Tiida has a length, width, and height of 4.5x1.7x1.5m. Overview of the Tiida: As a product of the global strategic alliance between Renault and Nissan, the TIIDA Tiida exudes a fashionable, dynamic European style. With its high-quality appearance, unexpectedly spacious interior, premium cabin, abundant personalized settings, advanced engine, and active and passive safety features, the TIIDA Tiida embodies "spacious comfort" and modernity. Tiida specifications: Wheelbase: 2600mm. Dimensions: 4.5x1.7x1.5m. Trunk capacity: 467L. Fuel consumption: 5.6l/100km. Fuel tank capacity: 52L. Engine type: HR16DE. Standard seating: 5. Top speed: 180km/h. Acceleration time: 11.8 seconds.
9
2
Share

What are the hidden functions of the Haval M6 car key?

The hidden functions of the Haval M6 car key are as follows: 1. After unlocking the car with the key, if the door is not opened, the vehicle will automatically lock after 30 seconds. 2. When the ignition switch is off and the door is not properly closed, the door cannot be locked remotely. 3. When the car key is inside the vehicle, the door cannot be locked. Below is more information about the Haval M6: 1. The Haval M6 has a length of 4664mm, width of 1830mm, height of 1729mm, a wheelbase of 2680mm, and a fuel tank capacity of 55 liters. 2. The car is equipped with a 1.5T turbocharged engine, with a maximum power of 110kW, maximum power speed of 5600 to 6000 rpm, maximum torque of 210Nm, and maximum torque speed of 1800 to 4400 rpm.
16
0
Share

Reasons for Civic Rearview Mirror Adjustment Failure

Civic rearview mirror adjustment failure can be caused by reasons such as poor button contact. Poor button contact: Poor button contact means the adjustment buttons for up/down and left/right directions malfunction. In this case, first check the switch - it's most likely dirty. Since dismantling the entire control panel is difficult, it's recommended to directly visit an auto repair shop or 4S store for professional cleaning. Misalignment of the white screw rod in the mirror: The symptom is that the motor makes operating sounds and shows working status during adjustment, but the control fails. Simply insert the white screw rod back into the rubber sleeve to solve this issue. Problems with the motor gear wiring harness: For this situation, visit a 4S store or auto repair shop to have professionals conduct inspections first, then perform targeted repairs after identifying the problem.
6
5
Share

How Many Liters of Engine Oil Should Be Added to a Mazda6?

Mazda6 requires approximately 4 liters of engine oil. Below is an introduction to the functions of engine oil: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, thereby reducing wear. 2. Auxiliary Cooling: Engine oil has a relatively low specific heat capacity and is located inside the engine, so it does not inherently have a cooling effect. However, during engine operation, the heat generated by fuel combustion can be carried back to the oil tank by the engine oil and then dissipated into the air, assisting the radiator in cooling the engine. The actual cooling is performed by water or antifreeze outside the engine casing. 3. Cleaning: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of the lubricating oil washes away contaminants generated on the working surfaces of the parts.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.