What is the actual fuel consumption of the Haima Premacy 1.8 automatic transmission?

1 Answers
DelEliana
07/25/25 8:19am
Haima Premacy's fuel consumption per 100 kilometers is approximately 9.5 liters. Here is some extended information about fuel consumption: Reasons for increased fuel consumption: Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. Methods to reduce fuel consumption: Start slowly, do not accelerate suddenly, shift gears at low RPM, do not compete with others at traffic lights, treat any dents on the car body, close the windows when driving at high speeds to avoid increased resistance, coast in high gear, never coast in neutral as it can easily lead to steering and brake failure. Fuel consumption can vary greatly depending on personal driving habits. Drive safely, do not drive under the influence of alcohol, do not drive while fatigued, do not exceed speed limits or overload, and always wear your seatbelt while driving.
Was this review help?
13
2
Share
More Forum Discussions

What is the maintenance interval for the Regal?

For the Buick Regal, the first maintenance interval is 5,000 kilometers, with the main maintenance items as follows: 1. Replace engine oil, oil filter, fuel filter, and air filter. Check whether the level of the car's coolant meets the specified requirements. 2. Check the fluid levels of the brake and clutch. Inspect the oil level in the power steering reservoir to ensure it complies with regulations, and check all oil pipe interfaces in the system for any signs of leakage. 3. Check the battery fluid level and the level in the windshield washer fluid reservoir. Examine the tension and aging of the belts for the generator, air conditioning, water pump, and power steering pump. Check whether all front and rear lights of the car are intact (including headlights, width indicator lights, turn signals, brake lights, reverse lights, and fog lights).
7
2
Share

What are the differences between Nissan X-Trail and Nissan Qashqai?

Here are the differences between Qashqai and X-Trail: 1. Different body dimensions: Qashqai's length, width, and height are 4384mm, 1837mm, and 1612mm respectively; X-Trail's length, width, and height are 4675mm, 1820mm, and 1722mm respectively. 2. Different wheelbase: Qashqai's wheelbase is 2646mm; X-Trail's wheelbase is 2706mm. 3. Different displacement: Qashqai has 1.6L and 2.0L displacement; X-Trail has 2.5L displacement. Additional information: Taking Qashqai as an example, this model is a vehicle under Dongfeng Nissan. In terms of appearance, it combines the characteristics of high-end hatchback cars with the design styles of SUV and HB, featuring an overall avant-garde and stylish shape with smooth body lines, integrating the elegance of sedans and the boldness of off-road vehicles.
18
2
Share

What are the differences between the Volkswagen Tiguan and Tiguan L?

Volkswagen Tiguan L and Tiguan are two models under the Volkswagen brand, with the main differences as follows: 1. In terms of appearance, the Tiguan L has a stronger sporty and dynamic style compared to the Tiguan. 2. Comparing the interiors, the Tiguan, being an older model, lacks the modern technological feel that the Tiguan L possesses. 3. In terms of power, the Tiguan features a 1.8T turbocharged engine, while the Tiguan L comes with a 2.0T turbocharged engine. 4. Regarding suspension, the Tiguan tends to feel a bit bumpy. Both the Volkswagen Tiguan L and Tiguan inherit the characteristic design of the Volkswagen family, with only minor modifications in certain areas and details. For example, the Tiguan has a smooth overall design with few edges, whereas the Tiguan L features more pronounced edges, akin to the different facial structures between Europeans and Asians.
9
4
Share

What is the Standard Width for Underground Garage Driveways?

The net width of two-way entrance and exit ramps in underground garages should not be less than 7m. The one-way extension length should be less than 4m, while the two-way transition lane for small vehicles should be less than 6m. For modified medium-sized vehicles, the middle lane should be less than 7m. The cross-sectional dimension of two-way lanes should be less than 1.5m, and the two-way transition section should not be less than 3.5m. Within the overall garage layout, the one-way longitudinal passage length should be less than 4m, the two-way transition lane for small vehicles less than 6m, and the interchangeable medium-sized vehicle lane above should be less than 7m. The non-lane width for one-way traffic is expected to be less than 1.5m, while the two-way excess width should not be less than 3.5m. The characteristics of underground parking garages include: High construction costs and long project durations. Underground parking garages have large capacities and generally do not occupy urban land, allowing cities to reserve more space for greening and beautification, thereby improving urban environmental quality. The protective advantages enable the integration of large-capacity underground parking facilities with civil defense infrastructure. The selection requirements for underground parking garages are: The planning and design of underground parking garages should be guided by urban construction and civil defense engineering master plans. They should be located in areas with favorable hydrogeological and engineering geological conditions and flat road surfaces. In cold regions, garage doors should avoid facing north or the prevailing winter wind direction. The entrance area should have sufficient open space for parking, shunting, car washing, etc. When garages are built within rock layers, factors such as rock thickness, lithology, dip slope, and flood levels must be considered.
12
1
Share

How Many Liters of Engine Oil is Best for the Hongqi H5?

The Hongqi H5 requires 5 liters of engine oil for optimal performance. The engine of the Hongqi H5 needs to be filled with 5W40 engine oil. Relevant details are as follows: Instructions for adding engine oil to the Hongqi H5: When adding engine oil to the Hongqi H5, first remove the engine decorative cover to reveal the oil filler port. Then, unscrew the oil filler cap by turning it counterclockwise. Slowly pour in the engine oil, check the oil dipstick, and reinstall the oil filler cap by turning it clockwise until it is securely tightened. Precautions when adding engine oil to the Hongqi H5: Engine oil should be added when the oil level on the dipstick falls below the minimum mark. Generally, it is advisable to check the oil level about once a week. Before driving, it is best to inspect the parking area for any signs of fluid leakage. When checking the engine oil, use your thumb and forefinger to test the oil's viscosity and look for any metal particles caused by friction and wear. If the viscosity is insufficient or metal particles are present, the oil should be replaced immediately. Differences between engine oil grades: The primary difference between engine oil grades is viscosity. The 'W' stands for winter, and the number before the 'W' indicates the oil's low-temperature operating range—the lower the number, the better the oil's low-temperature fluidity. The number after the 'W' represents the oil's high-temperature performance—the higher the number, the stronger the oil's protective properties at high temperatures. Introduction to the Hongqi H5: The 2020 Hongqi H5 measures 4945mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2875mm and a fuel tank capacity of 58 liters. The Hongqi H5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum torque of 258 Nm, and a maximum power output of 124 kW. It is paired with a 7-speed dual-clutch transmission.
19
2
Share

What is the 0-100 km/h acceleration time of the hybrid Accord?

According to official data, the 2.0L hybrid Accord accelerates from 0-100 km/h in 8.09 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The hybrid Accord accelerates from 0-100 km/h in 8.09 seconds with a maximum torque of 315 N·m, while the Camry Hybrid takes 8.68 seconds with a maximum torque of 221 N·m. Transmission efficiency: The transmission is the medium for power transfer and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The hybrid Accord is equipped with an E-CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The hybrid Accord accelerates from 0-100 km/h in 8.09 seconds with a power-to-weight ratio of 91 Hp/T, while the Camry Hybrid takes 8.68 seconds with a power-to-weight ratio of 104 Hp/T.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.