What is the actual fuel consumption of the H6 Guochao Edition?

2 Answers
AbelDella
09/03/25 3:52am
BAIC Huansu H6 is a light passenger vehicle with an actual average fuel consumption of 9.48L/100km. Here is the relevant information: Average fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. Gasoline: Gasoline is a volatile and flammable hydrocarbon mixture liquid distilled and cracked from petroleum, which can be used as fuel. It appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C, and its main components are C₅~C12 aliphatic hydrocarbons and cycloalkanes. Main uses: Gasoline is one of the most widely used light petroleum products and an important fuel for engines. According to the manufacturing process, gasoline components can be divided into straight-run gasoline, thermal cracking gasoline (coking gasoline), catalytic cracking gasoline, catalytic reforming gasoline, polymerization gasoline, hydrocracking gasoline, alkylation gasoline, and synthetic gasoline.
Was this review help?
12
3
Share
DiRachel
09/15/25 5:32am
I've been driving the Haval H6 Guochao Edition 1.5T for over a year now. For daily commuting in the city, the fuel consumption is around 9.5L/100km; it can spike above 11L when stuck in traffic, but drops to about 7.8L on the highway, which is a highlight. The car is spacious and comfortable, but fuel consumption is indeed significantly affected by my driving habits—I prefer smooth acceleration and minimal hard braking to save some fuel. Monthly fuel costs fluctuate between 500-600 yuan, slightly higher than the official claim of 6.8L but still acceptable. Over long-term use, I've found that maintaining proper tire pressure and regular maintenance can optimize fuel consumption by a few percentage points, which is worth trying.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Light on a 2019 Lavida?

Lavida tire pressure light reset method is as follows: 1. First, check the condition of the vehicle tires. Replace any damaged tires promptly. A tire blowout at high speed is extremely dangerous. If there are no safety hazards with the tires, you can replenish the tire pressure. 2. After replenishing the tire pressure, turn off the ignition switch first, then turn it back on to allow the vehicle to perform a self-check. If the tire pressure warning light still appears at this time, press and hold the tire pressure monitoring button on the right side in front of the gear lever for about five seconds. You will hear a "ding" sound, indicating that the tire pressure reset was successful. 3. At this point, you can release the button and check if the tire pressure warning light appears on the dashboard. If the tire pressure warning light still appears, some Lavida vehicles use an automatic tire pressure monitoring system. Therefore, drive the vehicle for a while to allow the system to monitor the tire pressure. If it is normal, the tire pressure warning light will automatically turn off. 4. If the reset is still unsuccessful, please contact a 4S store for inspection. It may be caused by a damaged tire pressure sensor or a system fault, to avoid driving safety hazards.
9
0
Share

Where is the OBD port on the Volkswagen Santana?

The OBD port in the new Volkswagen Santana is a pink-colored connector located under the steering wheel, directly above the driver's left foot near the steering column. You can see it by looking down. Additionally, in older Santana models, the OBD port is inside the gearshift lever boot—simply lift the shift lever dust cover from the panel to find it. More details are as follows: 1. The OBD system, short for On-Board Diagnostics, is an automated vehicle diagnostic system that continuously monitors the engine's operation to detect excessive exhaust emissions. If emissions exceed standards, it immediately issues a warning. 2. If a system malfunction occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. The Powertrain Control Module (PCM) stores the fault information in memory, allowing retrieval of diagnostic trouble codes (DTCs) through a specific procedure. These codes help mechanics quickly and accurately identify the nature and location of the issue. 3. OBD continuously monitors systems and components such as the catalytic converter, fuel system, EGR system, particulate filter, oxygen sensors, engine, and emission controls. 4. It gathers emission-related data from various components and connects to the ECU. If an emission fault is detected, the ECU records the fault details and corresponding codes, triggering the warning light to alert the driver.
6
3
Share

What Should Beginners Pay Attention to When Going on a Self-Driving Trip?

Here are some precautions for beginners going on a self-driving trip: 1. Do not rent a car for a self-driving trip. New drivers who have just obtained their licenses are not familiar with the vehicle and are prone to accidents. 2. When parking on the roadside or at night, always check if the doors and windows are locked. At the same time, do not leave valuables exposed or in the car to avoid attracting malicious intent from passersby. 3. Try to avoid driving at night. Apart from the risk of robbery, fatigue from nighttime driving can also lead to major accidents. 4. When traveling long distances, fill up the fuel tank before departure. If the destination is remote, consider carrying some extra fuel. If carrying extra fuel, use a fully enclosed, metal safety container. 5. For long-distance driving, it is best to travel with someone who has basic knowledge of vehicle repair. If possible, travel with more than one car to help each other out. 6. Take a break every 2-3 hours of driving to avoid the dangers of fatigue driving and to prevent health issues from prolonged driving. Additionally, it helps reduce the fatigue damage to the vehicle from long-distance driving.
13
3
Share

What suspension system does the Audi Q5 use?

Audi Q5 uses a five-link independent suspension for the front suspension and a trapezoidal link independent suspension for the rear suspension. Introduction to suspension system related information: The suspension system generally consists of elastic elements, guiding mechanisms, shock absorbers, buffer blocks, and a lateral stabilizer bar. Audi Q5 specifications are as follows: 1. The Audi Q5 is a mid-size 5-door, 5-seater SUV with body dimensions of: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, and a fuel tank capacity of 73L. 2. The Audi Q5 is equipped with a 2.0-liter turbocharged engine and an 8-speed automatic transmission, with a maximum power output of 169 kW, and its drivetrain is front-engine, four-wheel drive.
8
1
Share

Is the Touareg built on the same platform as the Porsche Cayenne?

Volkswagen Touareg and Porsche Cayenne are models built on the same platform, both primarily based on the MLB Evo platform. Below is extended information about the Volkswagen Touareg and Porsche Cayenne: 1. The Porsche Cayenne is the third large-size SUV under the MLB Evo platform. The Cayenne offers a very rich powertrain lineup, with three power variants available: a 2.9T V6 twin-turbocharged engine, a 3.0T V6 single-turbocharged engine, and a 4.0T V8 twin-turbocharged engine. In terms of transmission, all models are equipped with an 8AT gearbox and come standard with a four-wheel drive system. A Turbo S E-hybrid version is highly likely to be introduced in the future, featuring a 4.0T V8 twin-turbocharged plug-in hybrid system. 2. The latest model built on the MLB Evo modular platform is the Volkswagen Touareg. The third-generation Touareg is based on the MLB Evo modular platform, with lightweight construction being its most significant highlight. Thanks to the MLB Evo platform, the Touareg's body structure has been improved, offering better interior space performance and reduced body weight, which enhances acceleration performance. 3. The Volkswagen Touareg is the highest-quality SUV produced by Volkswagen, and its price is also the highest in the Volkswagen SUV series. Due to its understated exterior design, the Touareg is considered the most low-key choice among premium SUVs.
1
2
Share

What Causes Frosting on the Low-Pressure Pipe of a Car's Air Conditioning?

Frosting on the low-pressure pipe of a car's air conditioning can occur under the following circumstances: 1. Normal frosting. When the air conditioner starts running, the condensation temperature and pressure are relatively low, and the capillary tube supplies less refrigerant than normal, causing the evaporation pressure to drop. This leads to frosting on the low-pressure supply pipe. However, this frosting and melting process is brief, typically starting after the compressor runs and completing within 5 minutes, after which the air conditioner operates normally. 2. Refrigerant deficiency. When the air conditioner lacks refrigerant, frosting occurs on the low-pressure supply pipe, which is a typical malfunction. This phenomenon manifests as frosting on the low-pressure pipe from the start of operation, persisting even after the compressor runs for over 10 minutes. For older air conditioners, this may be normal and simply require refrigerant replenishment. If the deficiency occurs within two or three years of use or shortly after installation, it is likely due to a leak in the refrigeration system. 3. Partial blockage in the refrigeration system. Blockages often occur at the filter outlet or capillary tube inlet. The throttling effect caused by the blockage reduces the pressure below the normal operating level, resulting in frosting on the supply pipe.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.