What is the actual fuel consumption of the Great Wall M4?

1 Answers
DiElijah
07/30/25 12:59am
The actual fuel consumption of the Great Wall M4 is 7.70L/100KM. Below are relevant details about fuel consumption: Factors affecting fuel consumption: The driving habits of the driver, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, can all influence the vehicle's fuel consumption. Methods to reduce fuel consumption: Start in a low gear, gently press the accelerator, and gradually increase speed; avoid prolonged idling or low-speed driving; prevent the vehicle from being overloaded and the fuel tank from being full; avoid using high-viscosity engine oil; try to control speed with the accelerator rather than the brakes.
Was this review help?
5
2
Share
More Forum Discussions

Should You Depress the Clutch When Making a U-Turn?

You do not need to depress the clutch when making a U-turn. Here are the details: 1. Consequences of depressing the clutch during a U-turn: Depending on the actual situation, it is best not to depress the clutch during a U-turn; instead, only apply light braking. If you depress the clutch during a U-turn and encounter an emergency, it may cause the vehicle to stall. 2. Techniques for making a U-turn using forward motion alone or a combination of forward and reverse motion: (1) Forward U-turn: If conditions permit and the road is wide, you can use a large detour method to make a U-turn. In areas with traffic control personnel, you can first signal your intention to make a U-turn, and after receiving permission, reduce speed, shift to a lower gear, honk the horn, and proceed slowly to complete the U-turn. (2) Combination of forward and reverse motion U-turn: If the road is too narrow to complete the U-turn in one forward motion, you can use a combination of forward and reverse motions. Choose a safe section of the road, signal a left turn, and when the front wheels are close to the roadside or the front of the vehicle is near an obstacle, depress the clutch, lightly press the brake pedal, and before the vehicle comes to a complete stop, quickly turn the steering wheel fully to the right to redirect the front wheels for reversing. Then, immediately stop the vehicle firmly. 3. Precautions for making a U-turn: When there is no 'No U-Turn' sign, you can make a U-turn as long as it does not affect normal traffic and safety is ensured. Generally, the central divider on roads will change from a solid line to a dashed line near intersections. You can also make a U-turn on yellow grid lines where there is no central barrier.
8
5
Share

What does the trip on the car dashboard mean?

Car dashboard trip represents the trip mileage, the following is the introduction of related content: 1. Record: It can be used to record the mileage of each trip by the user. 2. Meaning: The left side represents the total mileage of the car. Press the switch button next to the trip number to randomly measure the mileage from point A to point B. For example, if you want to know the distance from home to the company, switch the odometer to trip before starting, and it will automatically count during driving. The number when you park at the company is the mileage. 3. Composition: The speedometer actually consists of two meters, one is the speedometer, and the other is the odometer. 4. Mode: The traditional speedometer is mechanical. A typical mechanical odometer is connected to a flexible shaft, which has a steel cable inside. The other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, and the steel cable drives a magnet inside the odometer cover to rotate.
4
0
Share

What is the fuel consumption of the new Qashqai?

The comprehensive fuel consumption of the new Qashqai is 6.2-6.4L/100km. There are currently 4 models of the new Qashqai on sale. Among them, the Luxury Edition, Luxury Pilot Edition, and Smart Edition have a comprehensive fuel consumption of 6.2L/100km. The Flagship Edition has a comprehensive fuel consumption of 6.4L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.9-8.5L/100km. When driving, the following 5 tips can help reduce fuel consumption: 1. When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly stomping on the accelerator, as this can multiply fuel consumption. 2. Gentle acceleration and braking, early braking: While driving, press the accelerator gently to avoid sudden increases in engine RPM and prevent the car from shaking during operation, making it more fuel-efficient. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can be improved by up to 20%. 3. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. 4. Regular vehicle maintenance or checks: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. 5. Close windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car encounters, requiring more power and thus increasing fuel consumption.
3
1
Share

What does it mean that gasoline cars cannot add diesel?

What it means that gasoline cars cannot add diesel is that gasoline cars should be fueled with gasoline, and diesel cars should be fueled with diesel—gasoline cars must not be fueled with diesel. The reasons why gasoline cars cannot add diesel are as follows: Gasoline has a low carbon content, while diesel has a relatively high carbon content, and their densities also differ significantly. The relationship is similar to that between light water and heavy water, with gasoline and diesel being analogous to light oil and heavy oil, respectively. Compared to gasoline, diesel has a lower ignition point and is less volatile, while gasoline has a higher ignition point and is more volatile. In a gasoline engine, when the fuel injector sprays gasoline and the air entering through the throttle valve forms a mixed gas that enters the cylinder, diesel may ignite before the spark plug fires, causing abnormal pressure in the combustion chamber and resulting in knocking. Additional information on the consequences of adding the wrong fuel: 1. The fuel injector pressure in gasoline engines is lower than that in diesel engines. When diesel is added, it cannot be fully atomized, leading to incomplete combustion, resulting in engine power loss, unresponsiveness to throttle input, and the emission of black smoke from the vehicle. 2. Diesel has a low ignition point and may combust violently on its own before the spark plug fires, causing abnormal pressure in the combustion chamber, commonly known as knocking, which poses significant safety hazards.
6
5
Share

What Does the Yellow Exclamation Mark in the Car Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and wiper fault indicator light. Below is a detailed introduction to the exclamation mark fault lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Main issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a malfunction in the transmission or transmission lubricant being below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Abnormality: A horizontal line under parentheses with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a malfunction in the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. You can also check by yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem. In addition, during daily use of the vehicle, the fault lights displayed on the dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety from forced driving. It should be noted that when the car is ignited and started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will automatically turn off. If a light does not turn on when the ignition switch is turned on, remains on without turning off, or lights up while driving, it indicates a malfunction in the related system. In such cases, seek professional help promptly for car inspection and repair to eliminate potential safety hazards.
8
3
Share

Does the quality of the BMW X3 transmission deteriorate after being domestically produced?

The quality of the BMW X3 transmission is not affected after being domestically produced. The vehicle is equipped with an 8-speed automatic manual transmission, which has achieved a high level of shift logic and transmission efficiency among its peers in BMW models. The BMW X3 is an SUV model and is equipped with BMW's patented xDrive intelligent all-wheel drive system. The BMW X3's intelligent all-wheel drive system can flexibly and quickly distribute driving force between the axles according to specific road conditions, ensuring strong traction whether on sharp turns, steep slopes, or slippery roads.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.