What is the actual fuel consumption of the Geely Xingyue L?

1 Answers
MacGabrielle
07/30/25 8:19am
Star Yue L fuel consumption is 6.8 to 7.8L. The following is a related introduction to the factors affecting fuel consumption: Habits and road conditions: Fuel consumption has a lot to do with driving habits and road conditions. Do not step on the accelerator heavily, gradual acceleration when starting is the most fuel-efficient. To save fuel, avoid stepping on the accelerator heavily when starting. Heavy stepping on the accelerator compared to normal speed starting will increase fuel consumption by 2 to 3 times. Frequent braking leads to increased fuel consumption: Maintaining a safe distance without frequent braking saves more fuel. If you do not maintain a safe distance, it is easy to need to brake on the road. When braking, the automatic transmission gear will drop, and the car will have to pull up from the low gear again. Starting from a standstill or low gear, the engine will consume more fuel.
Was this review help?
2
2
Share
More Forum Discussions

How to Turn on the Air Conditioning in BAIC New Energy Vehicles?

BAIC New Energy Vehicle air conditioning activation method is as follows: 1. If you want to activate the cooling effect, you need to press the A/C cooling button on the car and then rotate the temperature adjustment knob to the cooling zone. 2. If you want to turn on the heating, turn off the air conditioning cooling system and rotate the knob to the heating zone. Below is more information about car air conditioning: 1. The car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, used to regulate the temperature and humidity inside the car and provide a comfortable environment for passengers. 2. When the A/C switch is turned on, the engine drives the compressor to start working, causing the refrigerant to circulate in the sealed air conditioning system. The compressor compresses the gaseous refrigerant into high-temperature and high-pressure refrigerant gas before discharging it from the compressor.
5
1
Share

What is the difference between the P gear and the handbrake in an automatic transmission?

There are mainly the following differences between the P gear and the handbrake in an automatic transmission: 1. Different braking principles: When parking and engaging the P gear, the locking mechanism of the transmission will activate, preventing the vehicle from moving; when parking and pulling the handbrake, the rear brakes will engage the rear wheels to prevent dangerous situations like rolling. 2. Different braking effects: If only the P gear is engaged without pulling the handbrake when parking on a slope, it can exert significant pressure on the transmission's locking mechanism, potentially leading to transmission damage or oil leakage, and there is a high chance of the vehicle rolling. Conversely, if only the handbrake is applied without engaging the P gear, the transmission remains in a disengaged state, which can also easily lead to the vehicle rolling.
10
0
Share

What Does Clutch Free Play Mean?

The meaning of clutch free play is as follows: 1. Clutch clearance refers to the gap between the front and rear end faces of the driven disc and the surfaces of the flywheel and pressure plate after the clutch is disengaged. The clutch pedal free travel refers to the pedal stroke from when the clutch pedal is depressed until the free clearance is eliminated. 2. During the use of the clutch, the driven disc will become thinner due to wear, causing the free clearance to decrease, which will ultimately affect the normal engagement of the clutch. Therefore, after a period of use, the clutch needs to be adjusted to ensure proper free clearance. If the driver can adjust it themselves, it will bring a lot of convenience and avoid many troubles and safety hazards caused by malfunctions.
11
4
Share

What is the emission standard of the 2017 Vios?

2017 Vios complies with the China V emission standard. Below are several methods to identify a car's emission standard: 1. Check the environmental protection label issued during the vehicle inspection. Upon passing the inspection, an environmental protection label is issued, which should be affixed to the upper right corner of the windshield. The standard will clearly indicate the car's emission level. 2. Visit the official website of the Motor Vehicle Exhaust Pollution Supervision and Management Center or the local traffic management bureau's website to inquire. 3. Bring the vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. Make an approximate judgment based on the vehicle's registration year. Most cars registered after 2017 are China V; those registered after 2008 are mostly China IV; cars registered in 2007 might be China III or China IV; cars registered before 2007 are generally below China IV, meaning China III or China II; cars registered before 2005 are mostly China II.
6
2
Share

What is the fuel tank capacity of the City?

The fuel tank capacity of the City is 42 liters. Here are some details about this model: 1. Exterior. The front fascia design of the new-generation City is very similar to the new Fit, with very pronounced lines on the front fenders. The body features a dual waistline design, while the rear styling somewhat resembles the current Honda Crider. 2. Body dimensions. The new-generation City has seen significant improvements in body dimensions, measuring 4440/1695/1495mm in length, width, and height, with a wheelbase of 2600mm. 3. Powertrain. The new-generation City is equipped with the latest Earth Dreams series engines, with the 1.3L variant producing a maximum power output of 73kW and the 1.5L variant delivering 96kW. The transmission system offers a choice between a 5-speed manual and a CVT continuously variable transmission.
2
5
Share

Why does the car still pull to one side after a wheel alignment?

If the car still pulls to one side after a wheel alignment, you need to check the tire pressure and also inspect the brakes. If the car pulls to one side during braking, then the braking system needs to be checked. Below are the detailed explanations: 1. If the tire pressure of the two front tires is not the same, the car will pull to one side while driving. The front wheels have camber and toe-in angles, and the rear wheels also have camber angles. If there is an issue with the wheel alignment data, the car will pull to one side. For some cars, incorrect wheel alignment data can also cause uneven tire wear. 2. When driving over bumpy roads or speed bumps, the wheel alignment data of the car may change. Therefore, it is recommended to have a wheel alignment done regularly to ensure the car remains in good condition.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.