What is the actual fuel consumption of the Geely Vision X3 automatic transmission?

2 Answers
StCali
08/31/25 6:20am
The official data shows the fuel consumption of the Vision X3 is 6.5L/100km. Here is an introduction to the Vision X3 configuration: 1. Safety Features: The Vision X3 is equipped with both active and passive safety features, including a 39-meter braking distance from 100 km/h, independent four-wheel tire pressure monitoring, and Bosch 9.1 version ESP electronic stability system. These safety features enhance the driver's sense of security during the journey. 2. Technology Features: The Vision X3 comes with the G-Link intelligent car system, supporting functions such as smart navigation, entertainment audio, Carplay/Carlife smartphone connectivity, and convenient services like voice interaction, traffic violation queries, and weather forecasts. Through the voice interaction feature, drivers can engage in real-time vehicle communication and enjoy intelligent companionship via voice control. 3. User-Friendly Features: In terms of user-friendly features, the Vision X3 is equipped with an 8-inch large capacitive touchscreen. Other features include one-key start, one-touch power window lowering, frameless wipers, and automatic headlights. The Vision X3 also adopts Geely's 3.0-generation noise reduction standard, with idle noise as low as 39dB. 4. Powertrain: The Vision X3 is powered by Geely's self-developed 1.5L DVVT high-efficiency engine, delivering a maximum power of 75KW and a maximum torque of 141Nm. It offers two transmission options: 5MT and 4AT.
Was this review help?
20
5
Share
DelVincent
09/13/25 2:44am
I've been driving the Geely Vision X3 automatic transmission for over a year now, and the real-world fuel consumption is quite realistic. In city traffic jams, the fuel consumption can reach around 9L/100km, but on the highway during cruising, it easily drops to 6.5L. On average, it's about 8L combined, which I think is similar to what other car owners share online. As an owner, I've noticed that frequent stop-and-go at traffic lights and using the air conditioning can significantly increase fuel consumption. To save money, I plan my routes to avoid peak hours and use the eco-driving mode, which helps save a lot on fuel costs. Remember, the vehicle's condition also affects fuel consumption. Regular oil changes and air filter checks can make the car more fuel-efficient and extend its lifespan. Overall, the car's fuel consumption isn't ultra-low, but it's acceptable for daily commuting and family use. Don't expect it to be too economical, but the good thing is it's simple to maintain and durable.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What to Do When the Charcoal Canister is Clogged?

There are several solutions for a clogged charcoal canister: 1. When a clogged charcoal canister is detected, it is essential to clean or replace it promptly to avoid affecting vehicle performance. 2. After driving the car for a certain distance, stop the vehicle while keeping the engine running, then manually open the fuel filler cap. If a suction sound is heard, it indicates a clogged charcoal canister. 3. When the charcoal canister is clogged, the car may emit a noticeable gasoline odor. If the car has been parked outdoors for an extended period, opening the fuel tank cap may result in a large amount of gas escaping, indicating a clogged charcoal canister. When the charcoal canister is clogged, the passage to the fuel tank is blocked, causing the fuel tank to bulge, which can easily affect the engine's normal operation.
8
0
Share

Should the Transmission Fluid Be Changed?

Transmission fluid should be changed every 3 to 4 years or when the mileage reaches 60,000 to 80,000 kilometers. The functions of transmission fluid are: 1. Keeping the shifting system clean; 2. Lubricating the transmission components. Signs that indicate the need for a transmission fluid change include: 1. Vehicle shaking and rough shifting; 2. Transmission overheating warning on the dashboard; 3. Engine stalling; 4. Unusual noises. The functions of a car's transmission are: 1. Changing the gear ratio; 2. Expanding the torque and speed of the driving wheels; 3. Enabling the car to reverse; 4. Facilitating gear shifting or power output. Maintenance methods for a car's transmission include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the warm-up idling time; 5. Avoiding gear grinding when shifting.
19
0
Share

How to Turn on the Heater in a Sail?

The method to turn on the heater in a Sail is as follows: 1. After starting the car, wait for 5 to 10 minutes until the water temperature rises to the normal operating temperature, then you can turn on the heater; 2. Adjust the air conditioning circulation mode to internal circulation; 3. Switch to the heater mode, which is indicated by the red zone; 4. Adjust the air conditioning to a suitable level and set the direction of the air vents. The body dimensions of the Sail are: length 4684mm, width 1807mm, height 1628mm, wheelbase 2796mm, minimum ground clearance 178mm, and fuel tank capacity 45l. The Sail features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3t inline 3-cylinder turbocharged engine, delivering a maximum horsepower of 163ps, maximum power of 120kw, and maximum torque of 230nm, paired with a 6-speed automatic transmission.
5
3
Share

Which regions still allow registration of China V emission standard license plates?

China V license plates can be registered in regions where the China VI emission standard has not been implemented. Methods to identify a vehicle's emission standard are: 1. Check the environmental protection label sticker on the vehicle; 2. Examine the vehicle certification where the standard is indicated by Roman numerals - I for China I, II for China II, III for China III, IV for China IV, V for China V, and VI for China VI; 3. Use the vehicle registration certificate to check at the local vehicle management office. Taking China VI as an example, the China VIa standard specifies: 1. Gasoline vehicles must not emit more than 700mg of carbon monoxide per kilometer driven; 2. Gasoline vehicles must not emit more than 68mg of non-methane hydrocarbons per kilometer driven; 3. Gasoline vehicles must not emit more than 60mg of nitrogen oxides per kilometer driven; 4. Gasoline vehicles must not emit more than 4.5mg of PM (particulate matter) per kilometer driven.
14
0
Share

How many liters of engine oil does the Nissan Sylphy Classic require?

The Nissan Sylphy Classic requires 3 liters of engine oil. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in the engine cylinder ports; 5. To flush away dirt generated on the working surfaces of components. The method to check the engine oil level is: 1. Park the vehicle on a level surface; 2. After parking for 10 minutes, pull out the dipstick; 3. Hold the dipstick perpendicular to the ground to check the oil level. The body dimensions of the Nissan Sylphy Classic are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm, a minimum ground clearance of 166mm, a curb weight of 1188kg, and a trunk capacity of 50 liters.
5
1
Share

Where is Toyota produced?

FAW Toyota has three major production bases located in Tianjin, Changchun in Jilin Province, and Chengdu in Sichuan Province, China. More information about Toyota is as follows: 1. FAW Toyota Motor Co., Ltd. was established in June 2000, covering an area of 1.61 million square meters, with a current production capacity of 420,000 vehicles per year, and is registered in Tianjin Economic-Technological Development Area. 2. Tianjin FAW Toyota Motor Co., Ltd. was formerly known as Tianjin Toyota Motor Co., Ltd., established in June 2000. 3. The Vios is one of FAW Toyota's main models, designed and developed specifically by Toyota for the Asian market as an entry-level family car. Based on the NBC platform, after extending the wheelbase, the Vios developed on the small car platform almost reaches the level of a compact sedan.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.