What is the actual fuel consumption of the Geely Vision?

1 Answers
LeSienna
09/05/25 3:42am
Geely Vision manual transmission models have a fuel consumption of 6.5L/100km, which translates to 0.065L per kilometer. Geely Vision automatic transmission models have a fuel consumption of 7.5L/100km, which translates to 0.075L per kilometer. Below is an introduction to the Geely Vision: 1. Configuration: The Vision is a compact sedan under the Geely brand, equipped with a 1.5L naturally aspirated engine across the entire lineup. It delivers a maximum power of 80kW and a maximum torque of 142Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4400 rpm. 2. Exterior: The overall design of the Vision features Geely's signature water ripple grille, with adjustments made to the headlights and front bumper. The four ridges on the hood create varying light and shadow effects depending on the angle of view and lighting. The slightly raised trunk lid gives the impression of a small spoiler. 3. Interior: The Vision boasts extensive use of leather wrapping, including on the door armrests, center console, and multifunction steering wheel. It offers two color schemes: all-black and a two-tone Mustang Brown, both stitched with double-stitching craftsmanship. An 8-inch touchscreen infotainment system is also included.
Was this review help?
5
0
Share
More Forum Discussions

Do China IV motorcycles have three-way catalytic converters?

China IV motorcycles are equipped with three-way catalytic converters, as national regulations require China IV models to have them; otherwise, their emission standards would fail to meet environmental requirements. How to determine the condition of a three-way catalytic converter: Visual inspection. Check the exterior of the three-way catalytic converter for any damage or discoloration. If there are scratches, cracks, etc., it is likely that the converter has been damaged. If there are noticeable gray spots in the center of the converter's protective cover, severe fading spots, or purple discoloration on the shell, the converter may have experienced overheating issues. Observe the engine's exhaust. Place your hand near the exhaust pipe outlet to feel the exhaust flow and check if the three-way catalytic converter is clogged or if there is poor exhaust flow. Another method is to open the air filter, remove the filter element, and observe if there is exhaust backflow during rapid acceleration, which would indicate poor exhaust flow. To assess the condition of the TWC (three-way catalytic converter), check if the secondary air injection pump is functioning properly. Use an infrared thermometer. Compare the temperature difference between the front and back of the TWC using an infrared thermometer. If the temperature difference between the inlet and outlet of the three-way catalytic converter is less than 10°C, the TWC is likely damaged.
7
2
Share

How to reset the maintenance light on Jetour X70 Plus?

With the vehicle turned off, press and hold the menu button on the steering wheel, then press the power switch twice without releasing the menu button until the maintenance light on the dashboard disappears. Internal vehicle components will gradually wear out with increased driving time. The reminder indicator light is set to prompt timely replacement of parts after reaching a certain mileage. The function of the maintenance light is to record the usage mileage of some important components, just like a timer. Under normal circumstances, when performing vehicle maintenance, the maintenance personnel will first check the lights.
5
4
Share

How to Deal with the Constant Illumination of the Airbag Light in Trumpchi GS4?

Low battery voltage can also report similar faults. First, pull out the car key, then disconnect the negative terminal of the battery, wait for 5-10 minutes, and check if the fault light is still on. Observe whether the connector is loose, check the connection of each connector, and re-plug each connector. It is best to wrap a layer of black tape around the connector for fixation. Related parts need to be replaced, but the probability of such a fault is very small. If such a situation occurs, please go to a regular repair shop in time to avoid potential dangers.
11
5
Share

What does RS stand for?

In the automotive context, RS stands for the sport version. RS: The RS badge is most commonly found on Audi vehicles. Sport version models not only feature modified seats and body kits but also upgrade the engine displacement based on the original engine configuration. Here, 'S' represents 'Sport', while 'R' denotes high-performance sports cars. Audi RS: The Audi RS series models are entirely designed, developed, and manufactured by Audi's quattro division, utilizing a separate production line from Audi's regular models. The RS series is equipped with high-performance engines independently developed by quattro, making these models the true flagship vehicles in Audi's lineup.
16
1
Share

How to Turn On and Off the Volkswagen Automatic Wiper?

Push the wiper lever towards the dashboard, then flip it upwards to turn on the rear window wiper. Push the wiper lever towards the driver to activate the front window wiper, and flipping it upwards will make the front wiper work. To turn off the wiper, simply reset the position of the wiper lever, which will deactivate both the front and rear wipers. The lever on the right side of the steering wheel can also control the wiper's on/off function. However, when the front wiper is activated, the rear wiper will also start.
14
5
Share

How to Use the Cruise Control on the Soueast DX3?

Press the power button to activate the system (the on/off functions may be on the same button or separate buttons). At this point, the cruise control indicator on the dashboard will light up. Accelerate to the desired speed and press the SET button. You can then release the accelerator pedal with your right foot, and the speed will be maintained at the current level. You can fine-tune the speed using the RES+ and SET- buttons. There are three ways to deactivate cruise control: pressing the brake, pressing the cancel button, or pressing the power button. If cruise control is canceled by pressing the brake or the cancel button, you can press the RES button to resume the previous cruise control speed.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.