What is the actual fuel consumption of the Geely Boyue Pro 1.8T?

1 Answers
BentleyMarie
07/30/25 3:09am
The actual fuel consumption of the Geely Boyue Pro 1.8T is 7.5L/100km. Here are the relevant details: 1. The fuel consumption is considered average. However, there is a difference between the actual fuel consumption and the official fuel consumption released by the Ministry of Industry and Information Technology. The actual fuel consumption depends on factors such as the driver's habits and road conditions. Based on actual tests, the real fuel consumption of the Geely Boyue Pro 1.8T is around 10L/100km. 2. The most fuel-efficient way to drive the Boyue is to maintain a steady speed, start smoothly, avoid sudden acceleration and braking, and refrain from pressing the throttle hard when going uphill. Switch to economy mode when road conditions are good for better fuel efficiency. In urban areas, using normal mode can help save a significant amount of fuel.
Was this review help?
3
0
Share
More Forum Discussions

Can the air conditioning be turned on without starting the car?

You can turn on the air conditioning without starting the car, but the air conditioning will not have a cooling function. After using it for a while, the car's battery will lose power, making it difficult to start the car. Here are the relevant details: 1. Natural air: When the air conditioning is turned on without starting the car, the air blown out is basically natural air from the blower. Since the air conditioning compressor is powered by the engine, it won't work when the car is off. The blower's natural air is powered by the battery. 2. Power loss: If the air conditioning is used for a long time without starting the car, the car's battery will be depleted. In mild cases, the car won't start, and in severe cases, the battery will remain in a state of power loss for a long time. This applies only to traditional fuel-powered cars; new energy vehicles won't have this issue.
2
3
Share

How Often Should the Combustion Chamber Be Cleaned?

Engine combustion chamber carbon deposits are generally cleaned every 2 years or approximately 40,000 kilometers. Below are some precautions for cleaning the combustion chamber: 1. Before cleaning: Ensure the engine and power supply are turned off. Additionally, if the engine was previously in operation, allow it to cool down before cleaning to avoid burns. 2. The engine compartment contains many electrical components: Exercise extra caution during cleaning and avoid excessive force. When cleaning dirt in corners, do not strive for perfection to prevent damaging the components. 3. After cleaning: Do not immediately close the engine compartment hood, as the steam from the moisture evaporating due to the heat from the engine needs to dissipate. 4. Owners should clean regularly: This not only effectively reduces fuel consumption but also extends the engine's lifespan.
12
1
Share

What is the internal structure of an exhaust muffler?

Mufflers generally consist of several parts including the exhaust pipe, connecting sleeve, muffler cylinder, and cylinder core. Automotive mufflers are used to reduce the exhaust noise of the engine and allow high-temperature exhaust gases to be discharged safely and effectively. The muffler is an extension of the exhaust pipe and should ensure smooth engine exhaust, low resistance, and sufficient strength. Here is some relevant information: 1. Muffler: A muffler refers to a noise reduction device used in airflow pipelines that also propagate noise. It can utilize pipelines with sound-absorbing linings, elbows, or sudden changes in cross-sectional area, as well as other pipelines with discontinuous acoustic impedance, to attenuate or reflect noise within the pipeline. The former is called a resistive muffler, the latter is called a reactive muffler, and there are also impedance-combination mufflers. 2. Types of mufflers: There are many types of mufflers, but based on their noise reduction mechanisms, they can be divided into six main types: resistive mufflers, reactive mufflers, impedance-combination mufflers, micro-perforated panel mufflers, small-hole mufflers, and active mufflers.
9
5
Share

How to Adjust the Up and Down of a Car's Rearview Camera?

Rotate the camera 180 degrees and reinstall it. Here is a detailed introduction to the rearview camera: 1. Installation method: After preparing the rearview camera, first connect the wires and test it. If the image is not displayed in the rearview mirror, it is recommended to directly choose to return and replace it. Generally, the wiring for most rearview cameras is relatively simple, and you can directly plug them in according to the interface form. The longest wire is used to connect to the display screen, usually with a USB interface, which can be directly plugged into the smart rearview mirror. 2. Benefits of the rearview camera: The driver can see the situation behind the car on the display when reversing, avoiding accidents caused by the driver not being able to see the rear situation, making reversing safer for the driver.
8
5
Share

Can I Take Subject Four After Passing Subject One?

After passing Subject One of the driver's license test, you cannot directly take Subject Four. Here is some relevant information about Subject One: 1. Exam Introduction: Subject One of the driver's license test covers theoretical knowledge and is conducted at the vehicle management office. It is a mandatory licensing exam for applicants. The exam content includes the most basic knowledge such as driving theory, road safety laws and regulations, traffic signals, traffic rules, and local regulations. The timing of the theoretical driving test is arranged by the local vehicle management office. 2. Exam Process: The total time for Subject One is 45 minutes, and the test consists of 100 questions in the form of true/false and multiple-choice questions. The maximum score is 100, with a passing score of 90. The test questions are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Business Work Specifications."
5
4
Share

What to Do About Small Particles on the Paint Surface After Spray Painting?

If the spray paint is not smooth and has a grainy texture, it may be due to an unevenly sanded base layer; the paint layer applied may be too thin, or the working environment may be poor, leading to dust settling on the paint; it could also be caused by improper paint viscosity, resulting in poor spraying effects. For particles after spray painting, the standard treatment is to polish and wax the surface. Here is some relevant information: 1. Reasons for small particles: Generally, there are several causes for this issue—poor base layer preparation, inadequate sanding, low-quality paint, incorrect application methods, or an unclean spray gun. 2. Spray paint (aerosol paint): Typically composed of an aerosol can, valve, contents (paint), and propellant, it is paint processed and pressurized for easy spraying, also known as manual spray paint.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.