What is the actual fuel consumption of the Geely Boyue 2.0?

Should the Oil Dipstick Be Checked When the Engine Is Cold or Hot?

Check the oil dipstick when the engine is cold, specifically after the vehicle has been turned off for thirty minutes. This is because while the vehicle is in motion, the oil circulates throughout the engine, performing functions such as lubrication, friction reduction, heat dissipation, and cleaning. The consequences of oil exceeding the upper limit on the dipstick include: 1. Hindering crankshaft operation; 2. Increasing engine pressure, which affects engine power output. The method for changing the oil is as follows: 1. Run the engine until it reaches operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new filter; 5. Pour the new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.

3

4

Share

What to Do When Side Windows Are Blurred in Rainy Weather?

Methods to deal with blurred side windows in rainy weather include: 1. Turn on the window defogging mode; 2. Open the windows for convection to balance the temperature inside and outside the car; 3. Spray defogger on the glass; 4. Turn on the car's heating or cooling air to blow on the glass; 5. Apply soap evenly on the car windows. Precautions for driving in rainy weather include: 1. Slow down and maintain a safe distance from vehicles in front and behind; 2. Turn on the wipers to maintain good visibility; 3. Turn on the air conditioner to blow towards the windshield to reduce fogging; 4. Drive at low speed in waterlogged areas and detour if the water level exceeds the exhaust pipe; 5. Slow down at turns and avoid sudden braking; 6. Pay attention to the movements of non-motorized vehicles and pedestrians, and maintain a safe speed.

16

3

Share

How to Turn on Brake Assist?

Brake assist is automatically activated and does not require manual operation by the driver. It is enabled by default as soon as the vehicle starts. The brake assist system includes electronic brake assist and brake force assist systems. It can detect the driver's braking force and speed, then increase braking power during emergency stops to reduce stopping distance. Functions of brake assist: 1. Prevents wheel lock-up when braking; 2. When the vehicle experiences wheel slip, rollover, or loss of tire traction, it reduces engine speed while applying brake control to individual wheels to prevent dangerous loss of vehicle control.

17

2

Share

What is the difference between GTI and Golf?

The differences between GTI and Golf are: 1. Different engines: GTI adopts a 2.0L engine with turbocharging, inline four-cylinder, 16-valve electronically controlled dual injection system; Golf adopts a 1.6L engine with inline four-cylinder, 16-valve electronically controlled fuel injection system. 2. Different suspension systems: GTI uses reinforced MacPherson independent suspension and reinforced four-link independent suspension; Golf uses front MacPherson independent suspension and rear torsion beam semi-independent suspension. Both GTI and Golf are compact cars under FAW-Volkswagen, with a body structure of 5-door, 5-seat hatchback.

16

0

Share

Why Does the Car Turn Signal Flash Quickly?

The reasons for a car turn signal flashing quickly are: 1. Loose bulb or poor plug connection; 2. Inconsistent turn signal bulb power or model; 3. Faulty combination switch or instrument cluster. Car turn signals are lighting fixtures on vehicles that serve as warning tools for various driving signals. They are categorized by function into: low beam, high beam, front position light, front fog light, rear position light, reverse light, brake light, rear fog light, and license plate light. The functions of car turn signals are: 1. To alert pedestrians or other vehicles of an upcoming turn; 2. On highways, to indicate the direction of overtaking or lane changing; 3. When flashing simultaneously, to indicate an emergency situation, alerting other vehicles to pay attention.

1

5

Share

How to Charge the Car Battery During Long-Term Parking?

To charge the car battery during long-term parking, you should start the car once a month and let it run at medium speed for about 20 minutes. The functions of a car battery are: 1. To supply power to the starting system, ignition system, electronic fuel injection system, and other electrical components when starting the engine; 2. To provide power to the car's electrical equipment when the engine is off or idling at low speed; 3. The car battery acts as a voltage stabilizer for the entire vehicle's electrical system. Methods for maintaining the car battery include: 1. Regularly clean the dust and oil from the battery terminals and apply special grease to protect the wiring harness; 2. Periodically check the battery's accessories and connecting circuits; 3. Minimize the use of electrical equipment inside the car after turning off the engine; 4. Inspect the car battery through the observation hole on it and replace it regularly.

6

5

Share

What is the actual fuel consumption of the Geely Boyue 2.0?

Should the Oil Dipstick Be Checked When the Engine Is Cold or Hot?

What to Do When Side Windows Are Blurred in Rainy Weather?

How to Turn on Brake Assist?

What is the difference between GTI and Golf?

Why Does the Car Turn Signal Flash Quickly?

How to Charge the Car Battery During Long-Term Parking?

What is the difference between 99h and 99v?

What Causes Car Vibration During Low-Speed Braking?

What are the effects of pressing the accelerator while starting the engine?

What is the difference between L4 and H4 engines?