What is the actual fuel consumption of the Ford Edge 2.0t?

2 Answers
DeVivian
08/28/25 6:05am
The official combined fuel consumption of the Ford Edge 2.0t is 7.3-7.6L/100km. There are currently 6 models of the Ford Edge 2.0t on sale: the two-wheel-drive Enjoy Edition, the two-wheel-drive Smart Jiaxiang Edition, and the two-wheel-drive Yaoxiang Edition, with a combined fuel consumption of 7.3L/100km. The four-wheel-drive Zongxiang Edition, the four-wheel-drive Yaoxiang Edition, and the four-wheel-drive Jiaxiang Edition have a combined fuel consumption of 7.6L/100km. The above are the NEDC combined fuel consumption figures, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.2-11.5L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and evenly, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric terms relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle checks: Timely oil changes can reduce carbon buildup (carbon buildup can cause poor ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if it is dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close the windows while driving. Driving with windows open increases wind resistance, and the greater the wind resistance, the more resistance the car encounters, requiring more power and thus increasing fuel consumption.
Was this review help?
5
3
Share
MackenzieFitz
09/10/25 4:25am
My Ford Edge 2.0T has been running for three years, and the real-world fuel consumption does have quite some variables. During peak commuting hours in the city, it averages around 12-14 liters per 100 kilometers, especially higher when stuck in traffic or with the AC on. Frequent braking or sudden acceleration can spike the consumption by 1-2 liters. On highways, it's much more fuel-efficient, maintaining 80-100 km/h can keep it at 8-9 liters, resulting in a combined average of around 10-12 liters. Personally, I think this relates to the vehicle's age – newer cars might be slightly more efficient, while older ones see a slight increase. Many factors influence this, like full passenger load or extra cargo adding weight and raising consumption, whereas regular maintenance such as checking tire pressure can save a bit. Overall, as an SUV, this fuel efficiency is fairly standard, and developing smooth driving habits is advisable for daily heavy use.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to Set Volvo Seat Memory?

Volvo seat memory is set as follows: Adjust the seat, door mirrors, and head-up display to the desired position. Press and release the M button, the indicator light on the button will illuminate. Within three seconds, press 1 (memory button) or 2 (memory button to store settings). After the position is stored to the selected memory button, an audible signal will sound and the indicator light inside the M button will turn off. If no memory button is pressed within three seconds, the M button will turn off and no storage will be performed. You must readjust the seat and then set a new memory position.
5
4
Share

What are the steps to replace a headlight bulb?

1. Open the engine compartment hood, locate the dust cover at the rear of the headlight assembly, and unscrew the dust cover by turning it in the direction of the threads. 2. After removing the dust cover, find the bulb socket inside the headlight assembly. Pinch the wire clip next to the socket, and once the clip releases, you can remove the bulb. 3. Install the new bulb, reattach the dust cover, and close the engine compartment hood. Here are the types of car lights: 1. Headlights: The front lighting of the car, divided into low beam and high beam. 2. Fog lights: Used in foggy conditions when visibility is poor. 3. Brake lights: Illuminate when braking and are installed at the rear of the car.
2
1
Share

Can a Private Car Run Continuously for 24 Hours?

Private cars cannot run continuously for 24 hours. The reasons are as follows: Cooling System: If the vehicle runs continuously for a whole day, cooling system issues may arise, such as radiator blockage or water channel blockage, leading to overheating. In severe cases, it may even cause cylinder scoring due to the rising temperature. Engine Oil Leakage: For some vehicles in poor condition, engine oil leakage may occur. The leaked oil will continue to heat up as the vehicle keeps running, potentially causing spontaneous combustion. Impact on Engine Output: After several hours of continuous driving, the vehicle's exhaust will overheat. The overheated exhaust will trigger the Electronic Control Unit (ECU) to activate the vehicle's overheating protection, thereby affecting engine output.
11
1
Share

What are the reasons for a motorcycle lacking power?

Reasons for a motorcycle lacking power: Poor contact: Poor contact in the ignition switch or a loose connection on the ignition device can cause irregular ignition. Of course, the ignition device itself might also be faulty. Belt elongation or wear: Check if the drive belt has stretched significantly, causing slippage. The variator weights and belt pulley may also be worn. Insufficient intake or exhaust: If the air filter or exhaust pipe is clogged, insufficient intake or exhaust can lead to a lack of power. Faulty fuel tank vacuum switch: This can cause poor fuel delivery. Worn camshaft and valve rocker arms: This can result in irregular intake and exhaust.
5
2
Share

What kind of engine oil should be used for the maintenance of the Honda Avancier?

For the maintenance of the Honda Avancier, it is recommended to use fully synthetic engine oil with the specification 0W-20. More information about the Honda Avancier is as follows: 1. The Honda Avancier is based on the CONCEPT-D concept car debuted at the Shanghai Auto Show, adopting the popular coupe SUV style. It is an SUV that competes with the Highlander and Edge, with its power and space being its greatest advantages. 2. The Honda Avancier features an ultra-long wheelbase of 2820 mm, providing an exceptionally spacious and comfortable seating area. Equipped with soft ambient lighting throughout the dashboard, door panels, inner door handles, storage compartments, and ceiling, it creates a high-quality and stable atmosphere, offering owners a unique and luxurious experience.
10
5
Share

What to Do If You Don't Have an ID Card for the Driver's License Test?

If you don't have an ID card for the driver's license test, you can apply for a temporary ID card. Generally, a temporary ID card can be issued within one day. During the process of obtaining a new ID card, students can take the driver's license test with the temporary ID card. The following are the specific application conditions: Submit relevant documents: Citizens who meet the conditions specified in Article 2 of the "Management Measures" can apply at the local police station where their permanent residence is registered. They need to present their household registration booklet and a recent one-inch black-and-white photo without a hat (the photo size standard is the same as that for an ID card). Payment: Pay the document processing fee. For citizens under the age of sixteen, a guardian must apply on their behalf.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.