What is the actual fuel consumption of the Corolla?

What is the wading depth of the Atenza?

The maximum wading depth of the Atenza is 200mm. The wading depth of the Atenza is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Atenza is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use reference points such as warning water level markers, trees, or the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and consider taking an alternative route.

9

4

Share

How to Check the Score Report for Driver's License Subject 1?

You can check the score report for Driver's License Subject 1 through the Traffic Management 12123 platform: Open the website "12123", search for and find the official website of the "Ministry of Public Security Internet Traffic Safety Comprehensive Service Management Platform", then click to enter. After entering the official website of the Ministry of Public Security Internet Traffic Safety Comprehensive Service Management Platform, locate the "Local Platform Websites" section, find your province, and click to enter. Once you are on your province's page, find the "Personal Login" option at the bottom of the page. Log in using your ID number and the initial password obtained when scheduling the exam. After successful login, you can view the scores of the subjects you have already taken. There is no paper score report for Subject 1, as the driver's license examination is gradually becoming paperless. After completing Subject 1, the score will be immediately displayed on the computer, and the candidate must sign to confirm it on the computer. After passing Subject 1, the vehicle management office should issue a learning driving permit within one day. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": The score report for each subject must be signed by both the applicant and the examiner. No driver's license can be issued without signatures. The examiner must diligently perform exam duties, strictly follow the exam procedures, and accept public supervision. Before the exam, the examiner should introduce themselves, explain the exam requirements, and verify the applicant's identity; during the exam, they must strictly follow the exam procedures and evaluate the exam results based on the exam items and standards; after the exam, the results should be announced on the spot, and reasons for failing should be explained.

16

3

Share

Why does the Atenza shake at high speeds?

Atenza shaking at high speeds is due to engine malfunction. Here are the specific details about the Atenza: 1. Configuration: The new car comes standard with intelligent idle stop system and brake energy recovery system. The 2.5L model of the Atenza accelerates from 0-100 km/h in just 8.3 seconds, with a minimum fuel consumption of 6.9 liters per 100 km under comprehensive conditions, while the 2.0L model has a fuel consumption of only 6.3 liters per 100 km. 2. Appearance: It adopts Mazda's KODO design philosophy, with a U-shaped front face and LED headlights, giving it a stronger sporty feel. The new car features an 11-speaker audio system. Compared to the previous generation Mazda6, the Atenza's wheelbase has been increased by 107mm, providing more spacious rear seating. The Atenza utilizes the SKYACTIV-Chassis technology, equipped with high-performance MacPherson independent front suspension + multi-link independent rear suspension, achieving both weight reduction and increased rigidity through structural optimization.

5

Share

What are the reasons for insufficient power in the Baojun 730?

The insufficient power in the Baojun 730 may be due to excessive carbon deposits in the engine, insufficient engine power to handle the vehicle weight (possibly due to carrying too much load), or inadequate fuel supply to the engine, preventing it from delivering full power. Below is a related introduction to the Baojun 730: 1. Powertrain: Equipped with a "1.5T turbocharged engine + simulated 8-speed CVT continuously variable transmission" combination. The engine has a rated power of 111kW and a maximum net torque of 250N·m. The turbocharger engages at around 1000 rpm, and at 1600 rpm, it can achieve the maximum torque of mainstream 2.4L naturally aspirated engines on the market. 2. Configuration: Standard features include an 8-inch floating central multimedia screen, while higher-end models offer a 7-inch full LCD instrument panel. The vehicle is equipped with Car-play, SSP-LINK in-car connectivity platform, and other functions, supporting both Android and Apple systems. 3. Interior: The new Baojun 730 automatic transmission features a new black-gray interior color scheme, paired with dark wood-grain panels on the dashboard, ice-blue ambient lighting, and new dual-tone luxury seats, creating a layered, high-quality, and visually spacious interior.

14

2

Share

Which Mercedes-Benz models are priced around 200,000 yuan?

Mercedes-Benz models priced around 200,000 yuan include the base versions of the Mercedes-Benz CLA-Class, A-Class, GLA, GLB, and B-Class. Below is relevant information about Mercedes-Benz vehicles: 1. High Safety: Meticulous craftsmanship and high-quality materials are used, with the steel in the body construction being of high hardness and strength. In the event of a collision, the body deformation is minimal, ensuring sufficient survival space for passengers. 2. Powerful Performance: Thanks to advanced German engine technology and superior DSG dual-clutch transmissions, the vehicle delivers strong acceleration and rapid speed increases when driving at high speeds or overtaking. 3. Exquisite Interior: The interior trim is finely crafted with premium materials, instantly elevating the vehicle's overall premium feel.

2

5

Share

Under what circumstances can you make a left turn at an intersection with dashed left-turn lines?

You can make a left turn when it does not interfere with the normal passage of other vehicles and pedestrians. 1. According to Article 49 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": a. "Motor vehicles shall not make a U-turn at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections prone to danger." b. "Motor vehicles may make a U-turn at locations without no U-turn or no left-turn signs or markings, but they must not interfere with the normal passage of other vehicles and pedestrians." 2. Regarding the traffic rules for vehicle U-turns: a. For intersections without a dedicated U-turn signal but with a left-turn signal, generally, as long as there are no prohibitory U-turn signs or separate U-turn signal indicators, motor vehicles are not restricted by the traffic signal and can make a U-turn at any time, provided it does not affect the normal passage of other vehicles and ensures safety. b. On general roads, the central divider will often change from a solid line to a dashed line as it approaches the intersection, allowing vehicles to make a U-turn in this area. However, if the central divider does not have a dashed area before the stop line, the vehicle making the U-turn must cross the solid stop line and wait for the traffic signal to turn green before proceeding.

4

2

Share

What is the actual fuel consumption of the Corolla?

What is the wading depth of the Atenza?

How to Check the Score Report for Driver's License Subject 1?

Why does the Atenza shake at high speeds?

What are the reasons for insufficient power in the Baojun 730?

Which Mercedes-Benz models are priced around 200,000 yuan?

Under what circumstances can you make a left turn at an intersection with dashed left-turn lines?

Why Can't I Turn the Steering Wheel When Starting the Car?

Does carrying an extra child in a five-seat sedan count as overloading?

How to Drive Through the Curve in Subject 2?

How many seconds is a red light generally?