What is the actual fuel consumption of the Corolla 1.2T?

Why is the resale value of the BMW 1 Series low?

The reason for the low resale value of the BMW 1 Series is that the resale value of luxury cars itself is low. Models like the Mercedes-Benz E-Class or BMW 5 Series and above normally do not have very high resale values. The average resale rates for the BMW 1 Series over the first five years are: 59.7%, 52.3%, 46.3%, 42.3%, and 38.1%; its resale value ranks 62nd among compact cars. Relevant information about BMW sedans is as follows: 1. Styling Features: BMW sedans have distinctive body styling, with round lamps paired with rectangular radiator grilles forming a unique style. 2. Powertrain: All BMWs are rear-wheel drive, which allows for a 50-50 weight distribution between the front and rear, resulting in better performance during high-speed cornering and straight-line driving compared to front-wheel-drive cars.

19

5

Share

Is Automotive AC Leak Sealant Effective?

Automotive AC leak sealants are not effective. Here are the relevant details: 1. Important Notes: For any vapor-compression refrigeration system piping, there is no such thing as a "leak sealant." Since the refrigerant in vapor-compression refrigeration system piping is in motion with constantly changing pressure and temperature values, conventional leak sealants fundamentally cannot provide an effective seal. When refrigerant leaks occur in vapor-compression refrigeration systems, brazing repairs are required - products like "leak sealants" or "stop-leak additives" should never be used. 2. Potential Hazards: After leak sealants fail, they leave behind only some colloidal residue adhering to the AC piping. If this residue is promptly removed, it won't cause negative effects. However, if leak sealants are introduced into the refrigeration system piping, they may cause certain damage to the piping, refrigerant, or compressor oil.

3

2

Share

What to Do with the Tire Pressure Monitoring After Changing Tires?

Changing tires does not affect the tire pressure monitoring. Simply transfer the tire pressure monitoring sensors to the new rims and then reset them. Tire pressure monitoring is designed to automatically and continuously monitor the air pressure in tires while driving, alerting the driver to leaks or low pressure to ensure driving safety. There are three commonly used methods of tire pressure monitoring: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the air pressure in a tire decreases, the vehicle's weight causes that tire's rolling radius to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the above systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.

13

5

Share

How to resolve the prompt indicating increased steering effort required?

When encountering a situation where increased steering effort is required, replace the necessary software components based on the cause, such as the wheel speed sensor or the electric power steering system. Reasons for the prompt "Increased steering effort required": 1. Incorrect wheel speed sensor signal: For example, at higher speeds, the electric power steering system reduces steering assistance, requiring the driver to apply more steering force. 2. Mechanical failure in the electric power steering system: This refers to issues with the components of the electric power steering system, but repairs are rarely possible domestically, and the entire system usually needs replacement. 3. Fault triggered by auto start-stop: Firstly, auto start-stop places higher demands on the battery; otherwise, it can easily cause voltage instability, leading to program faults. On the other hand, turning the steering wheel while the engine is in start-stop mode can cause excessive voltage in the steering system, triggering steering protection and resulting in various electronic faults.

18

3

Share

How to Purchase Compulsory Traffic Insurance for a New Motorcycle?

There are three channels available for purchasing compulsory traffic insurance for motorcycles: 1. First: You can visit a local insurance company that offers compulsory traffic insurance to purchase the insurance for your motorcycle. 2. Second: You can directly purchase compulsory traffic insurance for your motorcycle online through the official website. 3. Third: You can go to the vehicle management offices in urban areas or county cities to purchase compulsory traffic insurance for your motorcycle. The following documents are required for purchasing compulsory traffic insurance for a new motorcycle: 1. First: Copies of the motorcycle driver's license, vehicle registration certificate, front and back of the ID card, and the motorcycle's factory qualification certificate. If renewing the compulsory traffic insurance, you also need to bring the previous compulsory traffic insurance policy. 2. Second: In addition to compulsory traffic insurance, owners can also purchase necessary commercial insurance as a supplement to ensure the safe travel of the vehicle.

16

3

Share

How to Remove the Stickiness of Adhesive Tape on the Car?

Methods to remove the stickiness of adhesive tape on the car are as follows: 1. Essential Balm: Add a small amount of essential balm to a spray bottle, then add some floral water, followed by some white vinegar. Shake the solution well and spray it on the adhesive residue, then wipe it off with a cloth. 2. Soap: Mix soap with a small amount of ammonia water and turpentine, then spray the mixture on the adhesive residue and wipe it clean. 3. Blow Dry: Use a hair dryer to dry the glue, wait a few minutes, and then scrape off the solidified glue. 4. Transparent Tape: Use transparent tape to repeatedly stick and peel on the adhesive residue, which can remove the surface adhesive. 5. Cotton Cloth: Dip a cotton cloth in a small amount of nail polish remover and wipe the area, which can soften the glue, making it easier to peel off after softening.

11

1

Share

What is the actual fuel consumption of the Corolla 1.2T?

Why is the resale value of the BMW 1 Series low?

Is Automotive AC Leak Sealant Effective?

What to Do with the Tire Pressure Monitoring After Changing Tires?

How to resolve the prompt indicating increased steering effort required?

How to Purchase Compulsory Traffic Insurance for a New Motorcycle?

How to Remove the Stickiness of Adhesive Tape on the Car?

How to turn on the air conditioning for an old Audi A6?

How to Turn On Various Car Lights?

What is the installation sequence of camshaft bearing caps?

What is the fuel consumption of the Changan Benben Mini?