What is the actual fuel consumption of the Chery Jetour X70 Plus?

2 Answers
OCora
09/06/25 3:45am
The average fuel consumption reported by owners is 7.5~14.0L/100km. Below is relevant information about the Chery Jetour X70 Plus: 1. Introduction: The Jetour X70 PLUS is a mid-size SUV under Chery, positioned as a wide-body intelligent SUV, available with both manual and automatic powertrain options. 2. Performance: The Jetour X70 PLUS is equipped with a 1.5T turbocharged engine codenamed SQRE4T15B, delivering a maximum power of 108kW (147Ps) and a peak torque of 210Nm. This engine was jointly developed by Chery and AVL. It is reported that engineers optimized it by improving the combustion system, cooling system, and reducing friction, achieving a thermal efficiency of 37.1%. For transmission, it is paired with a 5-speed manual or an 8-speed automatic transmission.
Was this review help?
19
5
Share
MacEmerson
09/18/25 3:42am
I've been driving my Jetour X70 PLUS for almost two years now, mainly for daily urban commuting, with an average fuel consumption around 9.5L/100km. It burns more fuel when using AC in summer, and can spike to 11L/100km in heavy traffic. But it's surprisingly fuel-efficient on highways - I once tried cruise control throughout the journey and the meter showed only 7.8L/100km. The 1.6T engine paired with the dual-clutch transmission has slightly higher fuel consumption during initial acceleration, but delivers quite linear power output once up to speed. For long-term city driving, I'd recommend using ECO mode - the throttle response becomes slower but saves significant fuel costs. Also, maintaining tire pressure around 2.5bar helps optimize fuel efficiency.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Use High and Low Beam Headlights?

Using high and low beam headlights involves the following steps: 1. First, locate the controls for the low and high beams. On the left side of the steering wheel, there is a combination light switch. Rotating the switch forward one notch turns on the dashboard lights, and another notch activates the low beams. 2. Use low beams when driving at night on roads with streetlights, when encountering pedestrians on the roadside, or on narrow roads, narrow bridges, and curves. 3. Use high beams when driving on roads without streetlights or on long, straight roads with poor visibility at night. Rotating the switch forward one more notch activates the high beams. 4. When meeting another vehicle at night while using high beams, always switch to low beams until the oncoming vehicle has passed, then you may reactivate the high beams.
19
3
Share

Why won't my Chevrolet Cruze start?

There are several reasons why a Chevrolet Cruze may fail to start: 1. Battery failure: If the car battery is dead or malfunctioning, it naturally won't start; 2. Spark plug issues: Spark plugs are key components in the car's ignition system, so if they don't work properly, it affects the vehicle's performance and efficiency; 3. Excessive carbon buildup: Too much carbon buildup in the vehicle can also prevent it from starting, requiring regular cleaning at a service center. The Chevrolet Cruze is a compact model produced by Chevrolet, with dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. It is equipped with an ECOTEC DVVT engine.
6
5
Share

What Brand of Tires Does the 10th Generation Accord Use?

The 10th generation Accord uses three brands of tires, such as Bridgestone, Michelin, and Hankook. Different model years may use different tires. The tire specifications for the 10th generation Accord are 225/50-R17-94V, and the original factory tire brand is Michelin PRIMACY-3. Precautions for tire storage are as follows: 1. Please move the tires indoors during rain to prevent water from entering the tires; 2. If tires come into contact with oil or water, they are prone to damage or deformation. Therefore, store them in a place free from oil and water; 3. Do not place tires in locations where they may be damaged or deformed; 4. Avoid placing tires near generators, batteries, or similar objects; 5. When storing tires for an extended period after removal, be aware that chemicals seeping from the tires may stain the floor.
1
4
Share

How to Use the S Gear in Golf?

The method to use the S gear in Golf is: If you are in D gear, you don't need to press the brake, just press the button on the gear lever to shift into S gear. If you are in P gear or N gear, you need to press the brake pedal and then press the button to directly shift into S gear. The Golf is a classic hatchback small family car launched by Volkswagen. The car's length, width, and height are 41999mm, 17869mm, and 14799mm respectively, with a wheelbase of 2578mm. The S gear is the sport mode. In this gear, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high revs for a longer time, allowing the car to move at high revs in lower gears for an extended period, thereby achieving greater torque output and acceleration.
14
2
Share

Where is the location of the X-Trail's cabin air filter?

The cabin air filter of the X-Trail is located on the driver's side, diagonally above the accelerator pedal. You can see it by removing the cover panel. The cabin air filter is a type of filter installed in the car's air conditioning system. It can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. There are two types of cabin air filters: one without activated carbon and another with activated carbon. The X-Trail is a compact SUV under Dongfeng Nissan. The vehicle's dimensions are 4675mm in length, 1820mm in width, and 1722mm in height, with a wheelbase of 2706mm. It is equipped with a 2.5L inline-four engine featuring CVTC (Continuous Valve Timing Control), delivering a maximum horsepower of 180 PS and a maximum torque of 245 Nm.
16
5
Share

Can a new battery be charged before it's fully depleted?

A new battery can indeed be charged even if it hasn't been fully depleted. Battery charging and discharging process: Battery charging is essentially an electrochemical [reduction] process, which involves applying a current opposite to that of discharging to restore the battery plates to their original state (before discharge). During discharge, the plates absorb sulfuric acid from the electrolyte, releasing electrical energy. The sulfuric acid adheres to the plates, increasing the resistance between electrodes as discharge time progresses until the electrode voltage drops, reducing discharge capacity. Typically, when a 12V battery discharges to 10.5V, it can no longer continue discharging, which is known as the discharge termination voltage. Battery definition: A battery is a type of cell, also referred to as an accumulator, that works by converting chemical energy into electrical energy. The term 'battery' commonly refers to lead-acid batteries, which primarily use lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.