What is the actual fuel consumption of the Changan Eado V7?

2 Answers
Sandy
09/07/25 7:32am
Changan Eado V7 actual fuel consumption is 6.5L. Introduction to Changan Eado V7: The Changan Eado V7 is Changan's all-new compact sedan. Sporty exterior design: Tension-filled tangent lines naturally blend into curved surfaces, complemented by blade-like side waistlines, conveying dynamic upward energy that's ready to burst forth. Pioneering powertrain: Low fuel consumption and high performance, with an average fuel consumption of 7.5L per 100km, while the dashboard displays 8L. Technological features: Equipped with advanced keyless entry and one-button start functions, enabling effortless ignition at your fingertips to enjoy stylish and convenient cutting-edge technology.
Was this review help?
10
5
Share
Elmer
09/19/25 6:38am
I've been driving the Changan Alsvin V7 for three years, mainly for urban commuting and highway driving. The actual fuel consumption fluctuates between 7.5 to 9 liters per 100 kilometers, which is significantly higher than the official figure of around 6 liters. I believe there are multiple influencing factors: driving habits matter greatly, as sudden acceleration or braking increases fuel consumption; road conditions also play a role, with traffic jams pushing consumption up to 10 liters; using the A/C at level two in summer adds about 0.5 liters. Additionally, the car's age and maintenance status affect it—my car's consumption slightly increased after reaching 50,000 kilometers. I recommend regularly checking tire pressure and the engine to save on fuel costs. Overall, this car is reliable, but fuel efficiency depends on how and where you drive it.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What type of engine oil should be used for BMW 520?

BMW 520 should use Castrol SM5W-40 fully synthetic engine oil, as this type of oil can better unleash the performance of BMW vehicles. Below is an introduction about refueling: Steps for refueling a car: Drive the car into the gas station, locate the corresponding fuel filler port, roll down the window, and turn off the engine. Open the fuel tank valve and inform the staff about the suitable gasoline type. Select the required amount of fuel to be added. After refueling, ensure the fuel cap is closed before restarting the engine. Precautions for car refueling: Avoid waiting until the fuel warning light comes on before refueling. Since the fuel pump is located inside the fuel tank, it operates at a high temperature continuously, and being immersed in fuel helps to cool it down effectively. When the fuel light comes on, it indicates that the fuel level is already below the fuel pump. If you always wait until the light comes on to refuel, it will shorten the lifespan of the fuel pump. Having too little fuel or running out of fuel may even burn out the fuel pump. Try to avoid refueling immediately after the gas station has just received a fuel delivery. This is because there are always some water and impurities settled at the bottom of the fuel tank. During fuel delivery, these water and impurities can be stirred up and mixed with the fuel. If such contaminated fuel is accidentally added, it can clog the fuel lines and cause damage to the vehicle's engine.
10
2
Share

What is the difference between Honda Dreamwing and Wing?

The differences between Honda Dreamwing and Wing are as follows: 1. Honda-Dreamwing is Honda's imported large-displacement motorcycle 4S store, mainly selling motorcycles with displacements ranging from 500cc to 1800cc, and the prices are relatively higher. 2. Honda-Wing is a unified channel established by Honda in collaboration with Sundiro Honda and Wuyang-Honda, upgrading the existing joint venture sales channels to become Honda's unified channel for mid-to-low-end motorcycles in China, forming a dual-channel sales network with Honda-Dream-Wing, covering both high and low ends.
4
2
Share

How does the radar indicate a collision?

If you can still hear the beeping sound, it means no collision has occurred. Relevant explanations are as follows: 1. Distance indication: The parking sensor indicates the rear distance based on the interval of the beeps: when it first starts beeping, the interval between beeps is long, indicating there is at least 1 meter of distance remaining. The smaller the interval, the closer the vehicle is to the obstacle. 2. False alarms: If the parking sensor gives false alarms and keeps beeping, the first thing to consider is whether there is anything around the radar. If the car is exposed to the elements for a long time, the sensors' environment deteriorates, and without regular attention, they can become covered in dust and dirt.
11
5
Share

Is Low-Range Four-Wheel Drive 4H or 4L?

Low-range four-wheel drive is 4L. Below is an introduction to 4H and 4L: 1. Introduction to 4H and 4L: In four-wheel-drive vehicles, 4H refers to high-range four-wheel drive, while 4L refers to low-range four-wheel drive. 4H stands for 4WD-HIGH and is used for quickly traversing uneven surfaces. 4L stands for 4WD-LOW and is used for slow passage through extreme off-road conditions. 2. Characteristics of 4H: High-range four-wheel drive is suitable for high-speed driving on paved roads or in rain and snow, and can handle most off-road conditions. It significantly improves stability, traction, and handling, but compared to 2H, fuel consumption increases. 3. Characteristics of 4L: Low-range four-wheel drive mode is typically found in vehicles with advanced four-wheel-drive systems or those with strong off-road capabilities, such as the Wrangler, G-Class, and Land Rover Defender. In this mode, the four-wheel-drive system uses a lower gear ratio to amplify torque. Some models may also automatically engage the central differential lock, rear differential lock, and various electronic assistance systems in this mode. 4L is the option for high-intensity off-roading. For models equipped with 4L and differential locks, using this mode on surfaces with good traction can lead to handling difficulties and component damage, and is therefore prohibited.
8
5
Share

What does Honda's hybrid E-CVT transmission mean?

The following is an analysis of Honda's hybrid E-CVT transmission: 1. The E-CVT transmission in Toyota's hybrid system is not a traditional CVT but rather a complex gear set. 2. Due to its gear structure, there is no "slipping" phenomenon as in traditional CVTs. It features a fully meshed transmission mechanism, making it more capable of handling high torque compared to conventional CVTs. 3. Structurally, Toyota's E-CVT has no relation to a traditional CVT. However, its smooth shifting experience resembles that of a CVT, hence the name E-CVT.
18
1
Share

What Does Single-Cylinder Four-Stroke Mean?

Single-cylinder four-stroke refers to the intake stroke, compression stroke, power stroke, and exhaust stroke. It replaces the single-cylinder two-stroke engine. Below are the differences between single-cylinder four-stroke and two-stroke engines: 1. Structural Aspects. The structure of a two-stroke engine is relatively simpler, mainly consisting of components such as the cylinder head, cylinder, piston, and piston rings. The cylinder body is equipped with intake, exhaust, and scavenging ports, which are opened and closed based on the piston's position. Compared to four-stroke engines, two-stroke engines lack complex valve mechanisms and lubrication systems. They typically use air cooling, significantly simplifying their structure. 2. Performance Aspects. A two-stroke engine performs twice as many power strokes per unit time as a four-stroke engine. Theoretically, the power output of a two-stroke engine should be twice that of a four-stroke engine (though in practice, it's only 1.5 to 1.7 times). Two-stroke engines have higher specific power output, better dynamic performance, and produce less vibration. Additionally, two-stroke engines are lighter, cheaper to manufacture, have lower failure rates, and are easier to maintain, making them more convenient and flexible to use. 3. Comprehensive Aspects. Four-stroke engines are more widely used, with the majority of cars and construction machinery equipped with them. Two-stroke engines, on the other hand, are more commonly used in applications where they are not frequently used or where the power-to-weight ratio is crucial. Examples include lawn mowers, chainsaws, model aircraft, agricultural machinery, as well as some small motorcycles and off-road bikes that prioritize power performance. They are also widely used in tanks, ships, and heavy-duty transport vehicles, where high engine power output is required along with lightweight and compact design, making two-stroke engines an excellent choice.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.