What is the actual fuel consumption of the Changan CS75?

2 Answers
LaAllie
07/24/25 7:19am
Changan CS75 offers three engine options: 1.5T, 1.8T, and 2.0L. The 1.5T version has a fuel consumption of 8-11L per 100 kilometers, the 1.8T version consumes 9-12L per 100 kilometers, and the 2.0T version consumes 8-11L per 100 kilometers. The actual fuel consumption during driving may vary due to factors such as driving habits, road conditions, and traffic environment. A fluctuation of up to 10% around the average fuel consumption range mentioned above is considered normal. Here are some ways to reduce fuel consumption by improving driving habits: 1. Gentle acceleration and braking, and early braking. Some drivers tend to accelerate aggressively, which increases CO2 emissions and significantly raises fuel consumption. Therefore, it's advisable to accelerate gently, avoid sudden increases in engine RPM, and prevent vehicle shuddering. Anticipate road conditions and accelerate or brake smoothly and gradually to save fuel. 2. Avoid frequent braking. When slowing down, try not to rely solely on the brakes. Instead, ease off the accelerator and use engine braking, which is more fuel-efficient than using the brakes. 3. Plan your route and travel time in advance. Driving during peak hours or in congested areas not only increases the risk of accidents but also exponentially raises fuel consumption. 4. Minimize short-distance trips. On journeys shorter than 5 kilometers, the engine often doesn't reach its optimal operating temperature, resulting in the lowest fuel combustion efficiency and the highest fuel consumption during such trips.
Was this review help?
20
1
Share
VanDaisy
08/11/25 3:03am
I've been driving a Changan CS75 1.5T automatic for nearly three years, with about 70% city commuting and 30% expressway driving. When I first got the car, the fuel consumption was around 11 liters per 100km, but it dropped after the first 5,000km maintenance and now stabilizes at about 9.3 liters. It's most fuel-intensive when using AC in summer - city traffic can push it up to 10.5 liters, while maintaining 100km/h on highways can bring it down to 7.8 liters. The large fuel tank allows over 500km per fill-up, so I only need to refuel twice a month. I recommend avoiding hard acceleration, shifting to neutral at red lights over 30 seconds, and maintaining 2.5 tire pressure for optimal fuel efficiency. Overall, the fuel consumption is decent for an SUV considering its spaciousness and power.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

At what mileage does the Mazda6 Atenza become less enjoyable to drive?

The Mazda6 Atenza becomes less enjoyable to drive after 300,000 kilometers. Here are the specific details about the Atenza: 1. Configuration: The new vehicle comes standard with intelligent idle stop system and brake energy recovery system. The 2.5L model accelerates from 0-100km/h in just 8.3 seconds, with a minimum combined fuel consumption of 6.9L/100km, while the 2.0L model has a combined fuel consumption of only 6.3L/100km. 2. Exterior: Adopting Mazda's KODO design philosophy, the U-shaped front grille paired with LED headlights enhances the sporty feel. The new model features an 11-speaker audio system. Compared to the previous generation Mazda6, the Atenza's wheelbase has been increased by 110mm, providing more spacious rear seating. The Atenza utilizes Skyactiv chassis technology, equipped with high-performance MacPherson strut front suspension and multi-link rear suspension. Through structural optimization, it achieves both weight reduction and increased rigidity.
19
4
Share

Should the clutch be fully released after starting?

After starting, the clutch needs to be fully released. Once the car starts smoothly, releasing the clutch completely has no impact. When the vehicle begins to move, it is important to keep the left foot steady on the clutch pedal without pressing down or lifting to avoid stalling. Hold it steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the ball of the right foot. Here are some additional tips for starting: When starting the vehicle, ensure that the doors are closed and seat belts are fastened. Check the mirrors to confirm safety on both the left and right sides before moving. Activate the left turn signal before starting. Release the parking brake lever as you start. Control the accelerator pedal appropriately to prevent jerky movements. Use a low gear when starting.
19
1
Share

How many cylinders does the Mercedes-Benz C260L engine have?

The Mercedes-Benz C260L is equipped with a four-cylinder engine. Below are the relevant details about the Mercedes-Benz C260L: 1. Dimensions: The Mercedes-Benz C260L has a body size of 4784×1810×1457mm with a wheelbase of 2920mm. 2. Performance: The Mercedes-Benz C260L is powered by a 1.5L turbocharged engine with a maximum power output of 135kw, paired with a 9-speed AT transmission. It accelerates from 0 to 100 km/h in 8.5 seconds and has a fuel consumption of 6L per 100 km. 3. Exterior: The car features a well-proportioned and aesthetically pleasing body design. The side profile is accentuated by two bold waistlines that highlight its sporty character, complemented by chrome trim on the windows and door bottoms, enhancing the overall premium feel of the vehicle.
7
3
Share

What Causes Unstable Idle Speed at Startup?

The reasons for unstable idle speed after startup are: 1. Clogged idle air passage or malfunctioning idle control device; 2. Weak spark in individual cylinder spark plugs; 3. Poor sealing of individual valves or intake manifold leaks; 4. Incorrect ignition timing (too early or too late) or improper idle speed adjustment. Solutions: 1. When the engine idle is unstable, adjust the idle speed first. If the problem persists after adjustment, check whether the idle jet and idle air jet are clogged. If clogged, clean them with gasoline or acetone and blow through with compressed air; 2. If unstable idle is accompanied by reduced engine power, further inspect spark plug performance, valve sealing, and ignition timing. Repair or adjust as necessary.
18
2
Share

Why does the Mazda Atenza sway from side to side at low speeds?

The Mazda Atenza's swaying from side to side at low speeds is caused by incorrect wheel balance data. Below is a detailed introduction to the Mazda Atenza: 1. Configuration: The new vehicle comes standard with features such as an intelligent idle stop system and brake energy recovery system. The Mazda Atenza 2.5L model accelerates from 0 to 100 km/h in just 8.3 seconds, with a combined fuel consumption as low as 6.9 liters per 100 km, while the 2.0L model achieves a combined fuel consumption of only 6.3 liters per 100 km. 2. Exterior: The car adopts Mazda's KODO design philosophy, with a U-shaped front grille paired with LED headlights, enhancing its sporty appearance. The new model introduces an 11-speaker sound system. Compared to the previous generation Mazda6, the Atenza's wheelbase has been increased by 111mm, providing more spacious rear seating. The Atenza utilizes the Skyactiv chassis technology, equipped with a high-performance MacPherson strut front suspension and a multi-link independent rear suspension. Through structural optimization, it achieves both weight reduction and increased rigidity.
3
5
Share

What procedures are required to change a seven-seater to a four-seater?

Procedures for applying to change a seven-seater vehicle to a four-seater: You need to apply at the local vehicle registration office. Only after the application is approved can you drive on the road. If the application is not submitted, the vehicle will not pass the annual inspection. According to the relevant regulations of the traffic management department of the public security authority, the following actions require an application: 1. Changing the body color or replacing the engine, or altering the vehicle body or frame; 2. Changing the use nature of the vehicle, such as converting from a commercial motor vehicle to a non-commercial motor vehicle or vice versa. The application procedures are as follows: 1. The vehicle owner must submit an application to the local vehicle registration office; 2. An application for change registration must be submitted to the vehicle registration office within the specified time after the modification; 3. Before registration, the vehicle design drawings must be submitted, and any traffic safety violations or accidents must be resolved; 4. Failure to apply for the change may result in warnings or fines from the public security traffic management department.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.