What is the actual fuel consumption of the Changan CS55PLUS?

Can the Fit use 5w30 engine oil?

The Fit can use 5w30 engine oil. This specification indicates the temperature range suitable for the oil. The lower the usage temperature, the lower the viscosity of the oil. 5W means it can be used at temperatures not lower than -30 degrees Celsius, while the 30 represents a maximum summer temperature of 30 degrees. Here are some details about engine oil: 1. The smaller the number before the W, the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for lower minimum temperatures. Using oil with a lower number before the W makes it easier to start the engine in cold weather. 2. Summer oil grades are: 20, 30, 40, 50. The larger the number, the higher the viscosity, and the higher the maximum temperature it can withstand.

8

5

Share

What to Do When the Mercedes Run-Flat Indicator Stops Working?

The main reason for the Mercedes run-flat indicator stopping operation is usually a deviation in tire pressure from the pressure at the last reset. The specific causes and solutions are as follows: 1. Specific Causes: If the Mercedes run-flat indicator stops working, it indicates that at least one tire's pressure deviates from the pressure at the last reset. The tire pressure needs to be checked and reset. If the tire pressure is insufficient, the dashboard will reactivate the run-flat indicator. 2. Solutions: The owner should first check the pressure of all four tires. If the indicator persists after adjustment, they can navigate to the maintenance menu via the steering wheel and select the tire pressure reset option.

1

Share

Is it no longer necessary to display the annual vehicle inspection sticker for car insurance?

Currently, the annual vehicle inspection sticker still needs to be displayed. Here is relevant information: 1. Since March 2020, many cities have begun piloting the digitization of motor vehicle inspection qualification marks, eliminating the need for paper stickers while allowing electronic certificates to be downloaded online. However, this does not mean that all regions have abolished the requirement to display physical inspection stickers - most areas still mandate their display, though electronic verification is available. 2. According to Article 95 of the Road Traffic Safety Law of the People's Republic of China, driving a motor vehicle without displaying the inspection qualification mark will result in a 50 yuan fine and 1 penalty point. For severe cases, traffic management authorities may impound the vehicle and require the owner to provide corresponding licenses, marks, or complete necessary procedures.

10

0

Share

What to Do If a Mouse Gets into the Car Engine?

Remove the mouse and pay attention to regular inspections. Methods to prevent mice from entering the engine compartment: Parking: Park the car as far away as possible from areas where mice are active, such as garbage dumps, ditches, or grassy areas. Regular Inspection: Regularly inspect and clean the engine to check for signs of mouse activity, ensuring the engine compartment remains clean. Periodically check the car's front grille for any damage or detachment, and address any issues promptly. Install an electronic rodent repellent in the engine compartment to use ultrasonic waves to deter mice. Placing rodent repellent bags or mothballs in hidden areas of the engine compartment can also be effective. Install protective barriers around the car.

19

5

Share

What is the ECU in a car?

ECU in a car is the Electronic Control Unit, a specialized microcomputer controller for automobiles, also known as the vehicle computer or onboard computer. The ECU can be considered one of the core electronic components in modern vehicles. The car's ECU functions like the human brain and is mostly installed under the dashboard on the driver's side or near the wiper linkage. The role of the ECU is to continuously monitor various input data (such as braking, gear shifting, etc.) and the vehicle's operating conditions (acceleration, skidding, fuel consumption, etc.). It calculates the information sent by various sensors according to pre-programmed procedures, processes it, and then sends the parameters to the relevant actuators to perform various predetermined control functions.

6

5

Share

What does it mean when the EPC light comes on?

The EPC indicator light has two states of illumination: during power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on or does not turn off for a long time after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, and brake light faults. Below is a detailed introduction to the reasons for the EPC light coming on under other circumstances: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the main body can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, deteriorated fuel, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other power system components can also trigger the EPC light. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake circuit issues. Solutions for when the EPC indicator light comes on: Troubleshoot intake system faults, use qualified fuel, clean the throttle valve body, etc. Remove carbon deposits from relevant parts, perform cleaning, etc. Rewrite ECU-related data (this is done when other faults have been resolved but the issue persists). Other faults cannot be ruled out. Specific repairs should be based on actual vehicle inspection results. When the vehicle starts its self-test, the EPC light will illuminate for a few seconds and then turn off. If a fault occurs, this light will stay on. Insufficient battery power can also cause the EPC fault light to come on. It is generally recommended to go to a 4S shop for inspection and maintenance.

15

1

Share

What is the actual fuel consumption of the Changan CS55PLUS?

Can the Fit use 5w30 engine oil?

What to Do When the Mercedes Run-Flat Indicator Stops Working?

Is it no longer necessary to display the annual vehicle inspection sticker for car insurance?

What to Do If a Mouse Gets into the Car Engine?

What is the ECU in a car?

What does it mean when the EPC light comes on?

What does the P triangle symbol mean on a car?

When to Enter the Left-Turn Waiting Area?

Can a C1 driver's license drive a blue-plate ambulance?

What are the hidden features of the 2009 Forte?