What is the actual fuel consumption of the Cadillac XTS?

1 Answers
Jace
07/29/25 6:38am
Cadillac XTS is a newly positioned full-size luxury sedan by Cadillac, with an actual fuel consumption of 9L/100km. The specific fuel consumption details are as follows: 1. Since fuel consumption is related to driving habits, vehicle load, and road conditions, the actual fuel consumption may vary. 2. It is normal for the actual fuel consumption to fluctuate by about 10% above or below the average. Relevant information about vehicle fuel consumption is as follows: 1. Constant-speed fuel consumption: This refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. 2. Road cycle fuel consumption: This is the fuel economy indicator measured when a car drives in repeated cycles according to specified speed and time regulations on the road, also known as multi-condition road cycle fuel consumption. In the speed and time regulations, each cycle includes various driving conditions, and specifies the gear shifting time, braking and stopping time, as well as the driving speed, acceleration, and braking deceleration values for each cycle.
Was this review help?
6
3
Share
More Forum Discussions

What to Do When the Oil Can Light on the Dashboard Comes On?

When the engine oil level is too low, causing low oil pressure, it is necessary to add oil. If the oil is dirty or too viscous, causing the oil pump to fail in sucking or pumping out oil, resulting in low or no oil pressure, the oil must be changed. If the oil becomes too thin and leaks from the engine's friction gaps, causing low oil pressure, the oil needs to be changed or the cooling system requires inspection and repair. Oil pipe leakage, oil pump damage, or excessive wear of its components.
16
2
Share

How to Check Lights Without Ignition for Subject 3?

Check the dashboard to see if the lights are in the off state. After completing the pre-driving preparations and successfully passing the fingerprint verification, you will hear the voice prompt: 'Now start the simulated night light usage. Please follow the voice prompts to operate.' Upon hearing the voice prompt 'Please start,' press the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), and simultaneously (turn your head to the left) observe the left rearview mirror.
7
3
Share

What is the one-step method for right reverse parking?

When starting the first step of reverse parking, pay attention to the positional relationship between the left rearview mirror and the parking line. While reversing the vehicle with the steering wheel fully turned to the right, observe the right rearview mirror. Monitor the distance between the car body and the right front corner of the parking space, keeping this distance at 30cm. Once half of the car body has entered the parking space, observe the relationship between the car body and the boundary lines through both left and right rearview mirrors. When the car body is parallel to the boundary lines, straighten the steering wheel.
19
3
Share

What is the valve clearance adjustment for Yuchai 24-valve engines?

Intake valve 0.3mm, exhaust valve 0.35mm. 1. Explanation: The exhaust valve clearance should be larger than the intake valve clearance because the exhaust valve is exposed to much higher temperatures than the intake valve due to exhaust gases, hence requiring approximately 0.05mm greater clearance. 2. Precautions: Improper valve clearance (either too large or too small) in Yuchai generators will cause decreased diesel engine power and reduced fuel efficiency. During diesel engine operation, valve clearance must be regularly inspected and adjusted. For multi-cylinder diesel engines, adjustments should be made sequentially according to the firing order and valve arrangement.
10
0
Share

What does it mean when the tire pressure indicator light turns yellow?

The yellow tire pressure indicator light is a reminder to the vehicle owner that the air pressure in one of the tires is insufficient and needs to be replenished promptly. Once the normal air pressure value is reached, the yellow tire pressure light will turn off. Whenever there is a change in the tire pressure, the tire pressure warning light will illuminate, which can be due to either a problem with the tire or temperature effects. Insufficient tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rise inside the tire during driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a tire blowout. It also results in higher fuel consumption and reduced tire lifespan.
7
4
Share

Why does the tensioner pulley keep failing?

Tensioner pulley failure can cause the engine timing to skip teeth. Tensioner pulley damage: A failed tensioner pulley can cause the engine timing to skip teeth, leading to ignition and valve timing disorders, engine shaking, difficulty starting, and in severe cases, failure to start. After starting, it may deform the valves. It is recommended to replace it as soon as possible. Symptoms of damage: Symptoms of a damaged tensioner pulley include sudden increase in engine noise during rapid acceleration (especially around 1500 RPM), engine timing skipping teeth, ignition and valve timing disorders, engine shaking, and difficulty starting (in severe cases, complete failure to start). If these symptoms occur, the tensioner pulley should be checked for damage.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.