What is the actual fuel consumption of the Buick Park Avenue 3.0?

2 Answers
LeIvan
07/24/25 7:23am
The official fuel consumption of the Buick Park Avenue 3.0 is: 10.9 liters/100 km. According to the crowd-sourced data from car owners on the website, the actual average fuel consumption is 13.0L/100KM. The Buick Park Avenue is produced by General Motors. The vehicle features innovative design and classic luxury, with smooth acceleration from 0-100 km/h in 7.8 seconds and a spacious and comfortable interior. Here is an introduction to the Buick Park Avenue 3.0: 1. The new Buick Park Avenue is equipped with an advanced 3.0L-V6-SIDI intelligent direct injection engine built with cutting-edge technology. This engine delivers a maximum power of 187kW/6700rpm and a maximum torque of 296Nm/2900rpm. Paired with a six-speed intelligent manual/automatic transmission and a high-performance rear-wheel-drive system, the vehicle accelerates from 0 to 100 km/h in just 8.3 seconds, with a combined fuel consumption of only 10.9L/100 km. The engine's power-to-displacement ratio of 62.3kW/L ranks at the top among its peers, offering significant advantages in efficiency and energy savings, along with superior smoothness and quietness. 2. This 3.0L-V6-SIDI intelligent direct injection engine shares its lineage with the 3.6L-V6-SIDI engine found in the Buick Enclave luxury SUV. Utilizing the most advanced cylinder direct fuel injection technology, the 3.0L-V6-SIDI engine shows a 5% reduction in fuel consumption and a 25% decrease in cold-start pollutant emissions compared to traditional engines of the same displacement, while significantly improving power and torque. It fully complies with the Euro 4 emission standards.
Was this review help?
3
0
Share
JanelleMarie
08/11/25 3:03am
I've been driving the Buick Park Avenue 3.0L for over a decade. For daily urban commuting, it averages 12-14 liters per 100km, while highway cruising can drop to around 9 liters. Driving habits make a big difference - aggressive acceleration or hard braking can spike consumption to over 17 liters. Maintenance is crucial too - I change engine oil and air filters every 5,000km, keep tire pressure at 2.5Bar, which helps save 1-2 liters. Older vehicles tend to consume more fuel, so regular checks for engine carbon buildup or sensor issues are important. The V6 engine delivers strong power but is generally thirstier than smaller displacements. I recommend using Eco mode more often, keeping windows closed to reduce drag, and monitoring fuel gauge changes - it saves both fuel and headaches.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How to Turn Off the ECO Mode in the 2021 Levin?

To turn off the ECO mode in the 2021 Levin, press the SPORT button next to the handbrake. In terms of power, this car is equipped with a 9NR horizontally-mounted turbocharged engine, paired with a 10-speed continuously variable transmission (CVT), delivering a maximum horsepower of 116 PS, a maximum power of 85 KW, and a maximum torque of 185 N·M. The principle of ECO mode is as follows: ECO mode primarily makes comprehensive judgments and analyses on factors that affect fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with appropriate gear positions to minimize unnecessary fuel consumption. The ECO mode works best in congested urban traffic conditions. In such scenarios, strong power is not required, and the frequent stops and starts lead to higher fuel consumption. Activating the ECO mode not only reduces fuel consumption but also makes driving more comfortable.
5
3
Share

How to Drive an S-Curve Without Crossing the Line?

Techniques for driving an S-curve without crossing the line are as follows: 1. Left point aligns with the right line, right point aligns with the left line: The left and right points refer to the top corners of the front of the car. When turning in a particular direction, use the corresponding corner to follow the opposite edge of the road. 2. Maintain slow speed: It is crucial to keep the speed slow. If the speed is too fast, lightly tap the brake, but never come to a complete stop. Also, do not release the clutch too much; steadiness is key in slow driving. Relevant information about curve driving is as follows: 1. Curve driving: This is an assessment point in Subject 2 of the driver's test, commonly known as the S-curve. The test requires the vehicle to navigate an S-shaped road of specified width without crossing the edge lines, demonstrating smooth and flexible steering. 2. Purpose: The assessment evaluates the driver's ability to control the steering and maneuver the vehicle through curves. The goal is to develop the driver's skill in steering application and understanding the trajectory of the wheels.
2
3
Share

What are the solutions when car keys are locked inside the vehicle?

Here are the methods to unlock a car when keys are locked inside: 1. Spare key: Vehicles generally come with two keys for owners - one for regular use and another as backup. 2. Professional locksmith service: Always choose a licensed and reputable locksmith company. Owners need to present relevant documents before unlocking, such as vehicle registration and ID card. 3. Contact the 4S store: 4S stores provide after-sales rescue services. Simply call and wait for the rescue team to arrive. 4. Using wire to open door: Normally after doors are closed, there's a sealing strip between the window glass and car body. You can remove this strip and carefully lower a thin wire or string down along the window gap near the door lock position. Once the wire hooks onto the door latch, pull upward to open. Note this method doesn't work for all vehicle models.
19
5
Share

What to Do If Your Car Is Scratched While Parked on the Side of the Road and the Culprit Cannot Be Found?

When encountering a situation where your car is scratched and the other party flees, you should quickly try to find the responsible party. Here are the detailed steps: 1. Check surrounding surveillance: If your car is scratched, first check if there are any surveillance cameras around where you parked, such as those at restaurants, shopping malls, or private residences. Generally, you can request to view the footage after explaining your situation. 2. Check your own dashcam: If your car is equipped with a dashcam, review the footage. If you capture the other party's license plate number, you can report it to the police. 3. Determine if the parking lot has compensation obligations: If your car was parked in a paid parking lot, communicate with the parking lot staff to see if they should compensate you, even if it's only a small amount. Parking lots usually have surveillance, and if the incident occurred there, the staff will likely assist in the investigation. 4. Report to the police for investigation: If your car is severely scratched and the other party flees, report it to the police immediately. The police can access traffic surveillance footage, which you do not have the authority to view yourself.
16
1
Share

How to Use a Spare Car Key?

Usage method of spare car key: 1. First locate a small rectangular hole at the end of the car door handle. 2. Pull the door handle outward with your left hand, then insert the spare key into the rectangular hole. After removing the lock cover, you will see the keyhole. Use the spare key to unlock the car door. Key custody precautions are as follows: 1. When not in the car, even for just a few minutes, never leave the key in the ignition. Always turn off the engine, lock the car, remove the key, and close all windows and sunroof tightly to prevent opportunities for thieves. 2. Generally, do not leave the spare car key inside the car. Modern car anti-theft systems are usually designed to protect the engine. Even if a thief duplicates a key to open the door, they cannot start the engine and drive away. However, the spare key can start the engine, so it must never be left inside the car. 3. When driving to public places, be cautious when handing over your car to a valet, as this can easily give thieves an opportunity to duplicate the car key.
15
0
Share

What is the braking distance of the Audi Q5L in meters?

The 100-0km/h braking distance of the Audi Q5L is 38.07 meters, and the 60-0km/h braking distance is 13.38 meters. During full braking, the Audi Q5L maintains good body posture with excellent suspension support. The rear lifts slightly, and the braking force is released linearly, providing a comfortable brake pedal feel. Here is an introduction to braking distance: 1. Braking distance is one of the key parameters for evaluating a vehicle's braking performance. It refers to the distance traveled by the vehicle from the moment braking begins until the car comes to a complete stop at a certain speed. It includes both reaction distance and braking distance. The shorter the braking distance, the better the vehicle's braking performance. 2. Higher driving speeds result in longer braking distances, with speed being proportional to the square of the braking distance. Braking force refers to the force that resists and stops the wheels from turning after the driver presses the brake pedal. The magnitude of braking force depends not only on how far the brake pedal is pressed but also on the coefficient of friction between the tires and the road surface. The smoother the road, the lower the coefficient of friction, leading to longer braking distances.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.