What is the actual fuel consumption of the BMW X3?

1 Answers
AubreyDella
07/29/25 3:25pm
BMW X3's actual fuel consumption is 11.2 liters per 100 kilometers. Here is the relevant introduction about the BMW X3: Exterior: In terms of appearance, the new car remains consistent with the 2019 model, still featuring two exterior designs: the Luxury Design Package and the M Sport Package. The side and rear of the car are also consistent with the current model. In terms of body size, the new car measures 4717/1891/1689mm in length, width, and height, with a wheelbase of 2864mm. Configuration: The biggest change in the 2020 model is that the xDrive25i series has been upgraded with a 12.3-inch full LCD instrument panel, making it standard across the entire lineup. At the same time, the new car has added front seat heating, removed the in-car CD player, and the speaker system is no longer optional; the xDrive28i series has added a sensor-activated tailgate, front seat heating, Harman/Kardon audio system, and 16-speaker system.
Was this review help?
13
1
Share
More Forum Discussions

Where is the spare tire located on the BMW 5 Series?

The spare tire of the BMW 5 Series is located under the floor in the trunk. Here is some extended information about the BMW 5 Series: 1. Introduction: It offers both fuel-powered and plug-in hybrid versions, and provides M Sport package and Luxury package as exterior options. 2. Interior: Spacious and comfortable seats. The seats feature 20-way electric adjustment with comfort headrests, elevating ergonomic comfort to a new level. Dark-grained matte ash wood panels paired with pearl chrome trim combine refined softness with exquisite design. B&W audio system, 11-color adjustable ambient lighting, and a panoramic sunroof with starry sky effect ensure a comfortable and pleasant journey.
20
1
Share

What's the reason why car Bluetooth cannot be turned on?

The reasons why car Bluetooth cannot be turned on include poor compatibility between the car's infotainment system and the mobile phone Bluetooth; frequent exposure to areas with severe magnetic interference, such as various communication base stations and substations; interference from electronic devices inside the car; too many connection records stored in the infotainment system, causing confusion when selecting connections. Methods to handle unsuccessful car Bluetooth connections: Turn off other electronic devices. Since intermittent Bluetooth issues can be caused by electronic interference, try turning off some of the car's electronic devices and then attempt to reconnect. If the signal is too weak, disconnect the device, move closer, and re-pair the signal. If the Bluetooth battery is low or of poor quality, charge the Bluetooth device or replace the battery. Delete other device records. Bluetooth connections can be affected by signal interference. If there are many other Bluetooth connection records on the phone, the Bluetooth may switch between devices when the signal is unstable. In this case, deleting other device records can help. Poor Bluetooth compatibility. If the phone and car Bluetooth system are not well-matched, the Bluetooth's poor compatibility can also lead to such issues. Not only car Bluetooth, but users of Bluetooth headphones and Bluetooth speakers have also encountered situations where the Bluetooth disconnects after playing music for a while, or the phone continues to play music while the speaker has no sound. This is often because too many apps are running when using Bluetooth, causing the Bluetooth to switch between multiple software and resulting in transmission issues. In such cases, simply disconnect and reconnect.
16
2
Share

What does a 48V vehicle power failure mean?

48V vehicle power failure means that the electrical equipment has malfunctioned. The following are the specific reasons for a 48V vehicle power failure: 1. False alarm: Due to a software program bug, the system mistakenly triggers an alarm. 2. Power loss: The 48V system is not continuously charged; it only charges during deceleration and braking. Components such as the electric water pump, electric auxiliary compressor, and air conditioning compressor are all powered by the 48V system. Additionally, during coasting, the engine stops running, and the motor maintains the vehicle speed. Therefore, on roads without traffic lights, especially on highways, power loss is more likely to occur. 3. Hardware failure: Internal short circuits in the 48V starter motor/generator, 48V wiring harness short circuits, which may cause the 48V battery switch to take protective measures and disconnect, or a malfunction in the 48V starter motor/generator cooling pipe, leading to poor heat dissipation.
12
0
Share

What are the body dimensions of the Elysee?

The body dimensions of the Elysee are 4427x1748x1476mm, which are official data. The length of the Elysee refers to the distance between two vertical lines perpendicular to the longitudinal symmetry plane of the vehicle and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the longitudinal symmetry plane of the vehicle and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Elysee is equipped with a 1.6L naturally aspirated four-cylinder engine across the entire lineup, delivering 117 horsepower and a maximum torque of 150 Nm, paired with a 5-speed manual or a 6-speed automatic transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
11
3
Share

Is a Wheel Alignment Necessary After Rotating Tires?

Tire rotation requires a wheel alignment. Generally, a wheel alignment is necessary after rotating tires. Tire rotation should be performed promptly according to the vehicle maintenance schedule, especially after the initial break-in period of a new car, as it significantly impacts tire lifespan. Therefore, to extend tire life, timely tire rotation as specified by the vehicle manufacturer is essential. Wheel alignment includes both front and rear wheel alignment. Front wheel alignment consists of: 1. Caster angle. 2. Kingpin inclination angle. 3. Camber angle. 4. Toe-in. Rear wheel alignment includes: 1. Camber angle. 2. Individual rear wheel toe-in.
2
3
Share

What Causes Excessive Oil Pressure?

Causes of excessive oil pressure include the following: 1. The oil viscosity is too low. You can use the dipstick to take out some oil from the crankcase and rub it between your fingers to check the viscosity. 2. The oil filter screen or filter element is clogged. Inspect the oil filter element to see if it is too dirty and replace it if necessary. 3. The spring tension of the pressure relief valve or return valve weakens or breaks, or the sealing surface of the valve is not tight, leading to oil leakage and pressure loss. 4. The clearance of the main bearing or connecting rod bearing is too small, making it difficult for lubricating oil to enter the friction surface and causing excessive pressure in the main oil passage. 5. The oil grade selected is inappropriate. For example, using summer oil in winter can make starting difficult and affect the operation of the lubrication system.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.