What is the actual fuel consumption of the BMW 730?

1 Answers
VanEmmanuel
07/29/25 5:10pm
The official combined fuel consumption of the BMW 7 Series is 6.4-12.6L/100km, while actual fuel consumption reported by some owners ranges from 9.9-13L/100km. The actual fuel consumption may fluctuate by about 10% depending on real-world driving conditions. The reasons for increasing fuel consumption are as follows: 1. Temperature effects causing fuel consumption fluctuations: In winter, lower temperatures generally lead to slightly higher fuel consumption, almost comparable to using air conditioning in summer. This is because low temperatures increase heat dissipation from the engine. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also increase fuel consumption. Contaminated oil leads to poor lubrication, causing increased resistance in engine components and requiring more energy to overcome this resistance, thereby increasing fuel consumption. 3. Spark plug replacement needed: Spark plugs are often overlooked. Even if they still function, worn spark plugs can cause delayed ignition due to insufficient energy, missing the optimal ignition timing.
Was this review help?
6
5
Share
More Forum Discussions

How Many Kilometers Should You Drive Before Replacing the Catalytic Converter?

You need to replace the catalytic converter after driving 10,000 to 20,000 kilometers. Most modern cars come equipped with a catalytic converter, except for some older vehicles produced before the National II emission standards were implemented, which may not have one. Lifespan of the Catalytic Converter: The service life of a catalytic converter typically ranges between 80,000 to 100,000 kilometers. The actual lifespan depends on the vehicle's usage conditions, fuel quality, and driving environment. Components of the Catalytic Converter: A catalytic converter generally consists of four main parts: the shell, damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxidation and flaking, which could clog the substrate. The damping layer is composed of padding or wire mesh, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration or thermal deformation, the padding is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is usually made of honeycomb-shaped ceramic material, though some are constructed from metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
11
3
Share

What is the function of the large spring in the Jog's clutch assembly?

The large spring in the Jog's clutch assembly serves to reduce the amplitude of torsional vibrations. Jog's positioning: The Jog is a compact scooter launched by Jianshe Yamaha. Due to its overall rounded shape, some riders also refer to it as a retro-style small scooter. Jog's dimensions: Seat height 740mm, wheelbase 1275mm, minimum ground clearance 115mm, fuel tank capacity 5.1L, with a cruising range that can easily reach 250 kilometers. Power aspects: The Jog is equipped with Yamaha's Blue Core technology powertrain. This engine performs well, whether in terms of power or fuel consumption, it can be considered a strong contender among models of the same displacement. During regular commuting, both performance aspects remain relatively balanced.
7
4
Share

What Causes a Four-Stroke Motorcycle to Emit Black Smoke?

The reasons and solutions for a four-stroke motorcycle emitting black smoke are as follows: Reasons for emitting black smoke: Excessively rich air-fuel mixture, excessive oil in engine fuel, poor sealing of piston rings or crankshaft oil seals, water in the fuel, faulty spark plug, excessively dirty air filter. Solutions for emitting black smoke: To inspect and diagnose an excessively rich air-fuel mixture, focus on checking the carburetor and air filter. The mixture ratio of fuel and oil is incorrect, or the wrong type of oil is used. If the mixed fuel contains too much oil or the oil quality is poor, the oil in the combustible mixture cannot burn completely, resulting in black smoke emission.
7
0
Share

How Long Does It Take to Get an Overhead Crane License?

It takes two months to obtain an overhead crane license. Definition of an overhead crane: Overhead crane: Also known as a bridge crane. It is a type of bridge crane that operates on elevated tracks. Specific operations for overhead cranes: Before starting work, it is mandatory to wear appropriate personal protective equipment. Only personnel with professional qualifications are permitted to operate lifting equipment; others must not operate it without authorization. Ensure the grounding wire is intact. Before starting, check for any abnormalities in the lifting buttons, as well as the condition of electrical, mechanical, and interlocking devices. Conduct a no-load test before lifting heavy objects to check for any irregularities. The weight of the lifted items must not exceed the rated capacity. Before lifting heavy objects, ensure the slings are securely fastened to prevent detachment. Lift the object slightly off the ground first to confirm stability and avoid accidents. Avoid pulling objects at an angle, and ensure no personnel pass beneath the lifted load to prevent hazards. Regularly inspect slings to prevent breakage.
15
1
Share

What's the reason for the loss of idle speed?

The reasons for the loss of idle speed are as follows: Air intake pipe leakage: Fault analysis: According to the idle speed stability control principle of the engine, under normal circumstances, the opening degree of the idle speed control valve and the intake air volume strictly follow a certain functional relationship, that is, when the opening degree of the idle speed control valve increases, the intake air volume increases accordingly. If there is leakage in the intake pipe, the intake air volume and the opening degree of the idle speed control valve will not strictly follow the original functional relationship, meaning there will be abrupt changes in the intake air volume as the idle speed control valve changes. The air flow meter cannot accurately measure the actual intake air volume, causing the ECU to inaccurately control the intake air volume and resulting in unstable engine idle speed. Idle speed switch not closing: Fault analysis: If the idle speed contact is disconnected, the ECU will determine that the engine is under partial load. At this time, the ECU determines the fuel injection volume based on the signals from the air flow meter and the crankshaft speed. However, the engine is actually operating under idle speed conditions with less intake air volume, leading to an overly rich air-fuel mixture and an increase in speed.
12
5
Share

What are the common types of brakes?

There are two common types of brakes: disc brakes and drum brakes. Disc Brakes: Disc brakes, also known as caliper brakes, are named for their shape. They are hydraulically controlled and consist of main components such as the brake disc, wheel cylinder, brake caliper, and oil pipe. The brake disc is made of alloy steel and fixed to the wheel, rotating with it. The wheel cylinder is fixed to the brake's backing plate and remains stationary. Drum Brakes: A typical drum brake mainly consists of components such as the backing plate, brake drum, brake shoe, wheel cylinder (brake wheel cylinder), return spring, and positioning pin. Introduction to Brakes: Generally refers to the manual brake installed in motor vehicles, commonly known as the handbrake, used to stabilize the vehicle after it has come to a stop, preventing accidents caused by rolling on inclined surfaces.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.