What is the actual fuel consumption of the BMW 320?

1 Answers
OwenLynn
07/29/25 3:12pm
The actual fuel consumption of the 2022 BMW 320 is 6.2L per 100 kilometers. The following are the factors affecting fuel consumption: Irregular driving habits: Harsh braking, driving at high speeds in low gears, frequent braking, and aggressive acceleration when starting can all increase the vehicle's fuel consumption. Carbon deposits in the transmission: Carbon deposits in the transmission can reduce engine power and, to some extent, lead to increased fuel consumption. This is because achieving the same power output as before the carbon buildup requires increasing throttle opening and corresponding fuel supply. Poor road conditions: When road conditions are poor, frequent switching between acceleration and braking can easily increase fuel consumption. Generally, flat roads are more fuel-efficient than uneven roads, straight roads are more fuel-efficient than winding roads, and smooth traffic is more fuel-efficient than congested traffic.
Was this review help?
13
1
Share
More Forum Discussions

How Often Should Car Air Conditioning Be Recharged with Freon?

There is no fixed interval for recharging car air conditioning with Freon. When the cooling effect of the car air conditioning deteriorates, you can check if the Freon level is low and proceed with replacement or replenishment. The method of using car air conditioning is as follows: 1. After starting the vehicle, turn the air conditioning knob to the cooling or heating zone; 2. Press the AC button when cooling is needed. The functions of car air conditioning are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create favorable working conditions for the driver and ensure safe driving. Car air conditioning, also known as the car air regulation device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to an optimal state. Its components include the refrigeration system, heating system, air purification device, and control system.
6
3
Share

How to Test an Automotive Ignition Coil?

Testing methods for ignition coils include: 1. When testing an ignition coil, the primary method involves using a multimeter to measure the resistance values of the primary and secondary windings. 2. The performance of an ignition coil can be tested on a universal test bench, mainly by measuring the spark gap to determine its performance. Additional information: 1. An ignition coil is a transformer that generates the high voltage required for ignition, converting 12V low voltage into 15–20kV high voltage. 2. However, the working principle of an ignition coil differs from that of a regular transformer. While a regular transformer operates continuously, an ignition coil works intermittently, storing and releasing energy at varying frequencies depending on the engine's speed.
7
3
Share

How to Remove the Rear Seat Cushion of a Santana?

The method to remove the rear seat cushion of a Santana is: 1. Pull the handle near the window; 2. Fold the backrest of the rear seat forward to detach it. Taking the Volkswagen Santana 2021 model as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, and fuel tank capacity 52.8L. The Volkswagen Santana 2021 model is equipped with a 1.5L naturally aspirated engine, with a maximum power of 82kW, maximum torque of 145Nm, maximum power speed of 6100rpm, and maximum torque speed of 4000rpm.
15
0
Share

Where is the fuel filter located on the Changan Ford Edge?

The fuel filter on the Changan Ford Edge is located inside the fuel tank. The fuel filter is designed to remove impurities from the gasoline, ensuring that the fuel entering the engine for combustion is clean. This promotes more complete combustion and reduces the formation of carbon deposits in the cylinders. Taking the 2021 Changan Ford Edge as an example, its body dimensions are: length 4878mm, width 1925mm, height 1734mm, with a wheelbase of 2850mm. The 2021 Changan Ford Edge is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW and a maximum torque of 390 Nm. It is paired with an 8-speed automatic manual transmission.
6
2
Share

How to Repair Car Paint Cracks?

Car paint cracks can be repaired by following these steps: 1. Clean the car paint surface and ensure it is thoroughly dried; 2. Remove the cracked portion of the paint; 3. Reapply the paint using the required coating method and materials. The layers of car paint, from the inside out, are: the electrocoating layer, the primer layer, the color coat layer, and the clear coat layer. Methods to maintain car paint include: 1. Promptly remove snow, rainwater, and other dirt from the car surface to keep the paint clean and aesthetically pleasing; 2. Apply wax to the car body to protect the paint, preventing cracking, corrosion, and rust; 3. Regularly inspect the car body surface and promptly repaint any damaged, scratched, or exposed areas; 4. Use specialized detergents and neutral water to wash the car body; 5. Wipe the car body with a soft cloth or sponge to avoid mixing in metal shavings and sand particles.
13
0
Share

How to Turn on the Heater in the Mazda3 Axela?

The method to turn on the heater in the Mazda3 Axela is: start the vehicle and adjust the temperature to the heating mode. The Mazda3 Axela is a compact 4-door 5-seater sedan with body dimensions of: length 4662mm, width 1797mm, height 1445mm, wheelbase 2726mm, and a fuel tank capacity of 50 liters. The Mazda3 Axela is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, with a maximum power of 86 kW and a maximum torque of 148 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.