What is the actual fuel consumption of the Beidou 1.4?

1 Answers
DelEmery
07/30/25 12:52am
Beidou 1.4L has a total of 4 models, including the 2019 facelifted 1.4L manual refined version, classic version, 1.4L manual refined version, and classic version. These models equipped with a 97-horsepower engine have an NEDC fuel consumption of 5.1L per 100 kilometers. The fuel tank capacity of different Beidou 1.4L models is the same. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 97-horsepower engine have a fuel tank capacity of 42L, and the distance that can be covered with a full tank is 42/5.1*100=824km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline is less likely to vaporize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
3
5
Share
More Forum Discussions

How many cylinders does the Tiguan L use?

The Tiguan L is equipped with the EA888 engine, a four-cylinder engine. Below is additional information about the EA888 engine: 1. The EA888 engine is a newly designed engine by Volkswagen, belonging to the third generation. It integrates advanced technologies such as direct injection, turbocharging, and variable valve timing, achieving a balance between power and fuel efficiency. 2. The EA888 series includes two displacements: 1.8L and 2.0L. The mechanical structures of these two engines are fundamentally the same, with differences in the length of the connecting rods and the crankshaft radius. The 2.0TSI has shorter connecting rods and a larger crankshaft radius compared to the 1.8TSI to increase displacement. 3. The piston top structures of the two engines differ, primarily to adjust the working volume of the combustion chamber, ensuring a consistent compression ratio and achieving the same combustion effect.
11
0
Share

Where is the oil filter located on the Tiggo 8?

The oil filter of the Tiggo 8 is located under the engine, in front of the oil pump. Here is some extended information about oil filters: 1. The oil filter ensures the cleanliness of the oil in addition to filtration. 2. If the oil bypasses the oil filter, it can reduce the engine's service life. 3. The function of the oil filter is to remove impurities, gums, and moisture from the oil, delivering clean oil to all lubrication points. The replacement frequency for the oil filter is as follows: 1. For frequent car use, the oil filter should be replaced every 8,000 km. 2. Under harsh conditions, such as frequent driving on dusty roads, it should be replaced every 5,000 km.
19
0
Share

What is the issue when the EPC light is on in a Volkswagen?

EPC indicator light staying on indicates a fault in the engine or electronic system. If the light remains on or flashes after ignition or during driving, it means the management system has detected a fault in the engine or electronic system. Please contact a service station immediately. Below are the solutions for a continuously lit EPC indicator light: 1. Troubleshoot the intake system, use fuel that meets standards, and clean the throttle body; 2. Remove carbon deposits and clean related parts; 3. Rewrite the ECU-related data. Below are the causes of EPC electronic throttle system faults: 1. Intake system faults, such as leaks or blockages; 2. Dirty throttle body with excessive carbon deposits; 3. Use of substandard fuel; 4. Abnormal cylinder pressure, poor operating conditions; 5. Valve faults, sticking or carbon deposits, etc.; 6. ECU faults; 7. Sporadic faults, false alarms.
16
5
Share

How to Replace the Air Conditioning Filter in Q5?

Audi Q5 air conditioning filter replacement steps are as follows: 1. The Audi Q5 air conditioning filter is located under the glove box. Unscrew the three plastic screws and pull out the entire glove box. 2. Locate the air conditioning filter cover at the bottom of the center console. 3. After unscrewing the screws, remove the cover plate. 4. Take out the old air conditioning filter. 5. Install the new filter. The functions of the air conditioning filter are as follows: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers, enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases, thereby ensuring driving safety and effectively sterilizing and deodorizing.
13
1
Share

What engine does the Changan CS75 use?

The Changan CS75 is equipped with two engines: a 1.5T and a 1.8T, with engine models JL476ZQCF and JL486ZQ2 respectively. Below are the details of the engines: 1. JL476ZQCF model: The actual displacement of the JL476ZQCF engine is 1499ml, with a turbocharged intake system, 4 cylinders arranged in an L formation. The engine reaches its maximum power at 5500 RPM and its maximum torque at 4500 RPM. The fuel supply method is direct injection, and it is recommended to use 92-octane gasoline. The 1.5T version has a maximum output power of 131 kW, a maximum torque of 265 Nm, a 0-100 km/h acceleration time of approximately 10.56 seconds, and a combined fuel consumption of 6.5L per 100 km as published by the Ministry of Industry and Information Technology. 2. JL486ZQ2 model: The actual displacement of the JL486ZQ2 engine is 1798ml, with a turbocharged intake system, 4 cylinders arranged in an L formation. The engine reaches its maximum torque at 5500 RPM and its maximum torque at 4500 RPM. The fuel supply method is direct injection, and it is recommended to use 92-octane gasoline. The 1.8T version has a maximum output power of 130 kW, a maximum torque of 245 Nm, a 0-100 km/h acceleration time of approximately 12 seconds, and a combined fuel consumption of 7.2L per 100 km as published by the Ministry of Industry and Information Technology.
18
0
Share

Do Four-Cylinder Engines Vibrate?

Four-cylinder engines do not vibrate and offer mature and stable performance. Working Principle of Four-Cylinder Engines: They typically convert chemical energy into mechanical energy. Sometimes, the term "engine" refers to both the power generation device and the entire machine including the power unit, such as gasoline engines and aircraft engines. The main component of an engine is the cylinder, which serves as the power source of the entire vehicle. Applications of Four-Cylinder Engines: The engine body mainly consists of the cylinder block, crankcase, cylinder head, and cylinder gasket, among other components. Primary applications: commonly used in car engines, motorcycles, chainsaws, and other small-power machinery.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.