What is the actual fuel consumption of the Baojun 530?

How to adjust the time on the dashboard of a Volkswagen car?

Method to adjust the time on the dashboard of a Volkswagen car: The button on the left side of the dashboard adjusts the hour, and the button on the right side adjusts the minute. First, press the left button, wait for the time on the trip computer to flash, then press the SET button on the right. Pressing SET once adjusts the time by one increment, while holding down the SET button makes the time digits change rapidly. Adjust the time by coordinating the use of both buttons. Volkswagen is a German automobile manufacturer headquartered in Wolfsburg, Germany. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example: it is a compact car launched by SAIC Volkswagen, with a length, width, and height of 4670mm, 1806mm, and 1474mm respectively, and a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission.

16

1

Share

What Are the Causes of Friction Noise in the Transmission?

Transmission friction noise can be attributed to the following reasons: 1. Wear noise: If the noise originates from the transmission during driving, it might be due to worn transmission bearings or gears, or bearing spots. 2. Speed change-related noise: If there is abnormal noise from the transmission during acceleration and gear shifting, it could indicate the presence of metal particles in the transmission fluid, suggesting excessive wear of components like brake bands and clutches inside the transmission. Here are specific solutions: 1. Check if the noise is speed-related: During analysis and judgment, pay attention to whether the noise is related to specific speeds, such as some planetary gears being more noticeably noisy around 50Km/h. Also, determine if it is related to certain gears, which is crucial for diagnosing transmission issues. If noise occurs in a specific gear, it is definitely related to the components affecting that gear's transmission. 2. Avoid gear grinding during shifting: Gear grinding refers to the noise that easily occurs during gear shifting. If this noise persists for a long time during gear changes, it can damage the ratchet teeth on the synchronizer ring.

12

4

Share

What is a vehicle PCV?

Vehicle PCV is the Positive Crankcase Ventilation system, a metering control valve composed of a valve body, valve, valve cover, and spring, which is non-disassemblable and installed between the engine crankcase ventilation system and the intake system. Below is an introduction to PCV: 1. Introduction: The PCV valve of a car is a component of the Positive Crankcase Ventilation system. The crankcase ventilation system is often referred to as the PCV system, exhaust gas recirculation system, etc. Its basic installation location is on the valve cover and the connected intake pipe. Its function is to prevent blow-by gases from entering the atmosphere and to prevent engine oil from deteriorating. 2. Function: The PCV valve consists of a valve body, valve, valve cover, and spring, and is non-disassemblable. Its main function is to direct the gases from the crankcase into the intake manifold through the PCV valve, with a small amount of air entering the intake manifold directly from the air filter via the PCV valve. This prevents phenomena such as throttle icing, incomplete combustion, and emission deterioration. It also prevents blow-by gases from entering the atmosphere and prevents engine oil from deteriorating.

1

5

Share

Is the Dongfeng Fengshen Yixuan prone to high failure rates?

No. The Yixuan is equipped with engines coded DFMC10TDS (1.0T) and DFMA15T (1.5T), both independently developed by Dongfeng. Currently, the 1.5T engine is widely used in many mid-to-low-end models with positive feedback, while the 1.0T engine is installed in fewer models. Therefore, choosing the 1.5T engine is the safest option if you plan to purchase the Yixuan. Below is additional information: 1. Introduction: Dongfeng Liuzhou Motor officially entered the automotive industry in 1969 and has made rapid progress, achieving new milestones in automotive innovation and key component development. It is a pioneer in China's independent automotive brand industry. Dongfeng Liuzhou Motor has production and processing bases for commercial and passenger vehicles in Liuzhou, Guangxi, producing not only passenger vehicles but also engineering vehicles. Dongfeng Liuzhou Motor has demonstrated that China's independent automotive brands can achieve outstanding development results. Its several sub-brands represent different development directions of the company. 2. New Yixuan Powertrain: Dongfeng Fengshen has launched a new Yixuan model—the 1.5T Automatic Glory Edition, which retains the current powertrain and outperforms competitors in the same class. It features a 150-horsepower 1.5T turbocharged four-cylinder engine paired with a 6-speed wet dual-clutch transmission.

5

0

Share

What is the fuel consumption per 100 kilometers of the new Jetta SUV VS5?

Jetta VS5's fuel consumption per 100 kilometers is 6.2-6.8L. Currently, there are 5 models on sale. Among them, the Jetta VS5-2022 manual Yuexiang Pro and manual Jinqu Pro both have a fuel consumption of 6.2L per 100 kilometers, while the automatic Yuexiang Pro, automatic Jinqu Pro, and automatic Rongyao Pro have a fuel consumption of 6.8L per 100 kilometers. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for comprehensive operating conditions. The actual fuel consumption is higher than this value, at 7.1L/100km. Among comparable models, the Changan CS75-2022 has a combined fuel consumption of 6.2L/100km, the Haval First Love 2021 has 6.5L/100km, and the Trumpchi GS3-2021 has 5.9L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the injected gasoline is less likely to atomize during cold starts, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control higher RPMs to warm up the car, which also increases fuel consumption.

4

1

Share

What do you need to do for the traffic duty during the driver's license test?

Traffic duty during the driver's license test is a requirement set by some local driving schools, where candidates must report to the local traffic police department before taking the third subject test and complete four hours of street volunteer service. Special cases such as pregnant women, disabled individuals, male candidates aged 60 or above, female candidates aged 55 or above, and nursing mothers can apply for exemption from the traffic guidance activities. Instead, they can participate in concentrated viewing of warning education films and other warning education activities. For more details, please see below: 1. What you need to do: Before obtaining the driver's license, you must report to the traffic police department and complete 4 hours of street volunteer service. During the service, the main task is traffic guidance, including reminding pedestrians not to cross the road randomly. The purpose of this is to give candidates a firsthand experience of traffic police work and a deep understanding of the necessity of safe driving before officially hitting the road. 2. According to Article 13 of the 'Interim Regulations on Traffic Safety Practice Education Management for Driving Students': Driving schools are required to have students under the age of 40 participate in a duty activity lasting 1~2 hours per day, mainly at urban intersections and bus stops. The duty is assigned to each driving school based on quotas. Once the driving school fulfills the monthly quota, it must send people to perform the duty.

10

4

Share

What is the actual fuel consumption of the Baojun 530?

How to adjust the time on the dashboard of a Volkswagen car?

What Are the Causes of Friction Noise in the Transmission?

What is a vehicle PCV?

Is the Dongfeng Fengshen Yixuan prone to high failure rates?

What is the fuel consumption per 100 kilometers of the new Jetta SUV VS5?

What do you need to do for the traffic duty during the driver's license test?

Does the Magotan have a plug-in hybrid model?

Is Replacing the Crankshaft Considered an Engine Overhaul?

What is the fuel consumption of the Buick GL8 2.5 V6 engine in the old model?

When to Straighten the Steering Wheel in a Right-Angle Turn?