What is the actual fuel consumption of the BAIC 212?

1 Answers
DeLucas
07/24/25 4:35pm
The fuel consumption of the BAIC 212 is 14L. Here are the extended details: 1. Powertrain: The BJ-212 Jeep is equipped with a 2445cc inline four-cylinder gasoline engine, featuring four-wheel drive and front/rear drum brakes. It is paired with a 3-speed manual transmission, delivering a maximum power of 75 horsepower and a maximum torque of 172 N·m. The vehicle weighs 1395kg and can reach a top speed of 120-130 km/h, with an approximate fuel consumption of 14L per 100 km. 2. Dimensions: The BJ-212 Jeep measures 4080mm in length, 1840mm in width, and 1870mm in height, with a wheelbase of 2300mm. The new BJ212 model has improved comfort and handling stability. The front doors on both sides have been fitted with additional sealing strips, enhancing dustproofing, sound insulation, and heat insulation. The body's soft connections reduce impact during driving, improving comfort. The lowered engine position due to the repositioned leaf springs lowers the overall center of gravity. Additionally, the increased curvature of the leaf springs further enhances comfort.
Was this review help?
2
1
Share
More Forum Discussions

Is Slight Shaking After an Oil Change Normal?

Slight shaking after an oil change is definitely not normal. Here are the reasons that may cause slight shaking: 1. Oil Fill Level: If there is too much oil, the excess can easily enter the combustion chamber and form sticky carbon deposits. While there may not be any noticeable effects initially, over time, the carbon buildup will become increasingly severe, leading not only to idle shaking but also clogging the catalytic converter pores, resulting in excessive exhaust emissions. In severe cases, it may even cause oil burning. 2. Oil Viscosity and Quality: Choosing the right oil for your vehicle is crucial. If the oil viscosity is too high, it will affect the oil's flowability, which can lead to engine shaking during idle. Additionally, the quality of the oil must be carefully considered. Inferior oil often lacks reliable quality assurance, which can not only cause idle shaking but also directly impact the vehicle's overall performance.
9
3
Share

Can a Car Charge Immediately Upon Ignition?

When it comes to charging a car battery directly upon ignition, the following precautions should be noted for battery charging and adding electrolyte: Precautions for Car Battery Charging: During the charging process, measure the density and voltage of the electrolyte approximately every hour, and monitor the temperature. If the temperature exceeds 40 degrees, the charging current should be halved. If the temperature continues to rise beyond 45 degrees, charging should be stopped and resumed only after cooling below 35 degrees. Precautions for Adding Electrolyte: First, use distilled water or a dedicated battery replenishment solution to adjust the battery's liquid level to the specified height. Before charging, connect the battery to be charged according to the rated voltage and current of the charging equipment. After the battery is fully charged, check the density of the electrolyte in the battery.
5
1
Share

What is the tire model of the Subaru Forester?

Subaru Forester is a compact SUV under the Subaru brand. The Subaru Forester uses two types of tire models, which are: 1. One is 225/55r18. 2. The other is 225/60r17. Information about tire models is as follows: 1. Tire specifications: Usually represented by a set of numbers, the first number indicates the tire section width, and the latter indicates the rim diameter, in inches. 2. Special meanings: "X" indicates high-pressure tires; "C" indicates reinforced tires; "B" indicates bias tires; "-" indicates low-pressure tires; M and S are abbreviations for Mud and Snow in English, indicating that these tires are suitable for use on snowy, icy, and muddy roads.
5
2
Share

What Are the Reasons Why a Self-Balancing Scooter Won't Charge?

Self-balancing scooters may not charge due to moisture in the battery, which prevents charging, or it could be because the battery is damaged. Introduction: Self-balancing scooters, also known as hoverboards, Segways, or personal transporters, mainly come in two types on the market: single-wheel and dual-wheel. Their operating principle is primarily based on a fundamental concept called "Dynamic Stabilization." With increasing environmental awareness, the number of electric vehicles has been growing rapidly. Technical Principle: The operating principle is mainly based on a fundamental concept called "Dynamic Stabilization," which refers to the vehicle's inherent self-balancing capability. Built-in precision solid-state gyroscopes determine the posture of the vehicle body, and through precise and high-speed central microprocessor calculations, appropriate commands are issued to drive the motor and achieve balance.
18
0
Share

Why Can't the Car Door Close When Frozen in Winter?

In winter, low temperatures may cause water to enter the lock mechanism or door seals, which then freezes and causes the issue. Below are some winter car washing tips: Where to Wash: It's best to go to a car wash with high-pressure air blowers to remove as much water as possible. Avoid places that only rinse the car or washing it yourself in extremely cold areas. A heated garage is also a good option. If no other options are available, try to dry the lock and door latch areas thoroughly. Precautions: If the car door is frozen and won't close, avoid using brute force to pull it open, as this can damage the paint and seals, and even break the door handle. Instead, use a smarter approach.
19
2
Share

Is It Safe to Connect a Dash Cam to a Fuse?

It is safe to connect a dash cam to a fuse. Below is relevant information about connecting a dash cam to a fuse: Power Supply from the Fuse Box: The wiring is longer but concealed. You can connect it to the ACC power supply in the fuse box, using a fuse and grounding wire, which ensures good safety without any risks. ACC Power Supply: This refers to the state before the car is started. If there is an ACC position on the ignition key, turning the key to this position powers some low-power devices. Benefits of Choosing Fuse Box Power Supply: Using the fuse box for power supply hides the wiring, making it aesthetically pleasing and practical. It does not occupy the cigarette lighter or USB port. Connecting to the ACC power supply enables automatic startup when the ignition is turned on and shutdown when the engine is off. Using a fuse and grounding wire ensures good safety.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.