What is the actual fuel consumption of the 8.5th generation Accord 2.0?

1 Answers
LeRobert
07/28/25 4:54pm
The actual fuel consumption of the 8.5th generation Accord 2.0 averages between 4.4-13.0L/100km. The combined fuel consumption per 100 kilometers for the 2.0L Accord mainly depends on driving conditions and habits. Factors affecting fuel consumption: Bumpy roads increase fuel usage; incorrect driving habits can double or triple fuel consumption; driving at high speeds in low gears increases fuel consumption by about 10%. Every vehicle has an optimal speed for fuel efficiency—driving below or above this speed increases fuel consumption, and exceeding a certain speed significantly raises fuel usage; neglecting maintenance also increases fuel consumption. Methods to reduce fuel consumption: Maintain the car's optimal performance by changing the engine oil every 5,000 kilometers and checking the filters. Keeping normal tire pressure levels is also an effective way to reduce fuel consumption.
Was this review help?
6
3
Share
More Forum Discussions

How to Adjust Car Low Beam Lights for Optimal Effect?

Here are the steps to adjust car low beam lights: 1. Enter the driver's compartment and locate the headlight height adjustment knob on the lower left side behind the steering wheel. 2. The headlight height adjustment knob has multiple gear positions, divided into four levels: 0/1/2/3. 3. Position 0 is the lowest height setting and also the default low position. 4. Position 1 is slightly higher than position 0 and can be adjusted according to road conditions. 5. Position 2 is slightly higher than position 1, but be careful not to affect oncoming traffic when using it. 6. Position 3 is the highest setting and can be used in suburban areas without streetlights. 7. The high beam control lever is located on the left side behind the steering wheel.
16
3
Share

What does car ctv mean?

It should be CVT. CVT refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between CVT and stepped transmissions is that the gear ratio is not a discontinuous point but a series of continuous values, thereby achieving good fuel economy, power performance, and smooth driving, while also reducing emissions and costs. Here is additional information: Detailed introduction: In a CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley via the steel belt. The secret lies in this special pulley: The construction of the CVT's transmission pulley is quite unique, divided into movable left and right halves that can move closer together or further apart.
7
0
Share

Is the Baojun 730 engine domestically produced or a joint venture?

Baojun 730 is a joint venture car. Below is the relevant introduction of Baojun 730: 1. Power: Equipped with a "1.5T turbocharged engine + simulated 8-speed CVT continuously variable transmission" powertrain combination. The rated power of this engine is 111kW, with a maximum net torque of 250N·m. The engine turbo can engage at around 1000 rpm, and at 1600 rpm, it can reach the maximum torque of mainstream 2.4L naturally aspirated engines in the market. 2. Configuration: Standard with an 8-inch floating central multimedia screen, while higher-end models will feature a 7-inch full LCD instrument panel. The new car is equipped with functions such as Car-play and SSP-LINK in-car connectivity platform, supporting both Android and Apple systems simultaneously. 3. Interior: The interior color scheme of the new Baojun 730 automatic transmission adopts a new black-gray style, paired with dark wood-grain panels on the dashboard, ice-blue ambient night lighting, and new dual-tone luxury seats, giving the interior a sense of layering, quality, and visual spaciousness.
12
2
Share

What is the difference between 97V and 97H tires?

H and V represent the speed ratings of tires, which indicate the maximum speed a tire can carry a specified load under defined conditions. The specific differences between the two are as follows: 1. Different properties: The 97H tire indicates the load index and speed rating of the tire. 97V represents the load index and speed rating of the vehicle tire. 2. Different characteristics: 97H means the tire can withstand a maximum vehicle speed of 210 km/h. 97V means the maximum speed this tire can withstand is 270 km/h. 3. Different maximum load capacities: 97H indicates that the maximum weight a single tire can bear is 650 kg. The 97V tire does not have this specification.
12
1
Share

How to Start the Car Without the Key for One-Button Start?

It is impossible to start the car without the key for one-button start. The one-button start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also turn off the engine. This device can be installed in place of the original car key lock or as an independent panel. Advantages of one-button start: 1. Automatic door unlocking: When the owner approaches the car within about 3 meters, the door locks will automatically open, disabling the anti-theft system. 2. When the owner leaves the car, the door locks will automatically engage, activating the anti-theft system. 3. When the owner enters the car, simply pressing the start button is sufficient, enabling keyless operation.
13
4
Share

How many meters away from traffic lights is parking prohibited?

Parking is prohibited within 30 meters of traffic lights. 1. Article 63 of the "Regulations for the Implementation of the Road Traffic Safety Law" clearly stipulates that temporary parking is prohibited at intersections and within 50 meters of the intersection. 2. At intersections with traffic lights, parking within 30 meters is considered a violation. Parking beyond 30 meters at intersections with traffic lights depends on whether there is a no-parking sign; if present, parking is not allowed. 3. Long-term parking at intersections with traffic lights is illegal. When encountering a green light at such intersections, vehicles should proceed in order and must not park for extended periods. Relevant regulations state that vehicles passing through signal-controlled intersections must adhere to the following rules: a. At intersections with marked lanes, enter the appropriate lane based on the intended direction of travel; b. When preparing to enter a roundabout, yield to vehicles already inside the intersection; c. When turning left, turn from the left side near the center of the intersection. Activate the turn signal when turning, and use low beams when driving at night; d. When encountering a green light, proceed in order; e. When encountering a red light, stop in order behind the stop line. If there is no stop line, stop outside the intersection; f. When turning right and encountering a vehicle in the same lane waiting for a green light, stop and wait in order; g. At intersections without directional signal lights, turning vehicles must yield to straight-moving vehicles and pedestrians.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.