What is the actual fuel consumption of the 240-horsepower J6?

1 Answers
LeBarrett
07/30/25 2:45am
FAW J6-240 is a truck equipped with a diesel engine, with a fuel consumption of 20 liters per 100 kilometers. The fuel consumption of a vehicle is not only related to the vehicle itself but also to the driver's habits and road conditions. The factors affecting fuel consumption are as follows: Different models have different fuel consumption: With the same amount of fuel, different models inherently have different fuel consumption due to their design. The weight of the vehicle plays a significant role; small cars and large trucks will naturally have different fuel consumption levels. Different vehicle conditions lead to different fuel consumption: Even the same vehicle with the same amount of fuel will consume more when driving at high speeds compared to steady road conditions. Additionally, a loaded truck consumes more fuel than when it is unloaded. Different driving habits result in different fuel consumption: With the same model and fuel amount, the driver's personal habits can also affect fuel consumption. For example, driving with windows open on highways increases air resistance and fuel consumption. Sudden stops, hard braking, and rapid acceleration also lead to higher fuel consumption, while warming up the engine before ignition can help save fuel.
Was this review help?
4
5
Share
More Forum Discussions

What are the features of Ferrari?

Detailed introduction to Ferrari driving features: Driving Modes: There are five knobs on the lower right corner of the steering wheel: WET represents Wet Mode, SPORT represents Sport Mode, RACE represents Race Mode, CT-OFF indicates Traction Control System Off, and ESC-OFF indicates all Electronic Stability Programs Off. Gear Shifting: Gear shifting is done using paddle shifters, with the left paddle for downshifting and the right paddle for upshifting. Gear Buttons: There are only three gear buttons on a Ferrari: LAUNCH for launch control, R for Reverse, and AUTO for Automatic.
9
2
Share

When will Henan implement the China 6 emission standard?

Henan implemented the China 6 emission standard on July 1, 2019. Below are the standards and impacts of China 6 vehicles: Standards for China 6 vehicles: The China 6 emission standard, also known as the National Sixth Stage Emission Standard for Motor Vehicles, is an upgrade from the China 5 standard. It requires a reduction of over 50% in carbon monoxide and total hydrocarbon emissions compared to the previous standard. Impacts of China 6 vehicles: Most importantly, after the implementation of the China 6 emission standard, non-China 6 vehicles cannot be produced, sold, or registered. Following the standard, used China 4 vehicles can only be transferred locally, not across regions. In high-standard first-tier cities, even China 5 or China 6 vehicles can only be transferred locally, and incoming vehicles must meet the China 5 or China 6 standard.
20
5
Share

How Often Should Car Wiper Blades Be Replaced?

It is generally recommended to replace them once a year. However, if the wiper blades are still performing well and show no signs of aging, extending the replacement interval is acceptable. The most important factor is the condition of the wiper blades themselves. The specific replacement methods and classifications are as follows: How to Remove Wiper Blades: First, lift the wiper arm upward. Then, use the thumb and index finger of your left hand to firmly pinch both sides of the wiper connector at the anti-slip textured positions. Simultaneously, use your right hand to lift and open the cover. Hold the wiper arm tightly with your right hand, and with your left hand gripping the wiper blade, pull it downward along the direction of the arm. This will allow you to remove the wiper blade. Types of Wiper Blades: Traditional wiper blades rely on a metal frame to press the rubber blade against the windshield. Due to their structure, they cannot achieve perfect contact with the glass, leading to issues such as incomplete wiping, faster blade wear, and increased noise. Beam-style (or frameless) wiper blades use a single pressure-distributing strip to evenly distribute force across the blade, reducing water streaks and scratches for a cleaner wipe.
16
3
Share

What is the material of the bumper?

Most car bumpers are made of plastic. The reason is to absorb and cushion external impacts, thereby protecting the vehicle body, pedestrians, and occupants. Here are the details: Protection principle of plastic bumpers: When a car collides at low speed, the plastic bumper can protect the vehicle body to a certain extent due to its cushioning effect. At the same time, because plastic bumpers have the characteristic of collapsing, they can also protect pedestrians in the event of a collision. Practical significance of plastic bumpers: The use of plastic bumpers in cars is beneficial for both automakers and car owners. For automakers, plastic bumpers are less costly than metal ones. For car owners, replacing a plastic bumper after a collision is more economical.
10
2
Share

Why is U-turn prohibited at railway crossings?

The reason U-turns are prohibited at railway crossings is to prevent traffic accidents. Here are the specific details: Prohibited U-turns: Motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs/markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other hazardous road sections. Permitted U-turns: Motor vehicles may make U-turns at locations without no U-turn or no left-turn signs/markings, provided they do not obstruct the normal passage of other vehicles and pedestrians. At permitted U-turn locations with dedicated U-turn traffic lights, U-turns should be made during the green light phase. If there is no U-turn signal but corresponding markings indicate U-turns are allowed during red or green lights, drivers should follow the marking instructions.
16
3
Share

What car has a logo of two overlapping ∧ symbols?

The logo featuring two overlapping ∧ symbols represents the Citroën automobile brand. Here is some information about Citroën cars: 1. Brand Emblem Background: The Citroën logo resembles two human figures or two check marks. Citroën is the third-largest automobile manufacturer in France, established in 1919 with a long-standing history in the automotive industry. In 1976, the Peugeot Group acquired 89.5% of Citroën's shares and merged the two brands. The reason Citroën adopted this emblem is that its founder invented the herringbone gear, which not only became a flagship product but also evolved into the brand's iconic logo. 2. Citroën's Vehicle Lineup: C-Zero, C1, C2, C3, C4, C4L, C5, C6, C8, C-Elysée, C-Crosser, C3 Picasso, C4 Picasso, DS3, DS4, DS5, Nemo, Berlingo, Jumper.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.