What is the actual fuel consumption of the 1.0 Alto?

2 Answers
DeEmmanuel
09/01/25 3:00am
1.0 Alto's actual fuel consumption per 100 kilometers is around 6L. Factors affecting fuel consumption: Driver's driving habits, road conditions, weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, these factors will all affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Start in low gear, gently press the accelerator, and gradually increase speed; avoid prolonged idling or low-speed driving; avoid excessive vehicle load and a full fuel tank; avoid using high-viscosity engine oil; try to control speed with the accelerator rather than the brake. Fuel tank capacity: Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a fuel tank capacity of about 55-75 liters. After filling up the tank, the car can usually travel about 500 kilometers.
Was this review help?
12
0
Share
Tyra
09/13/25 5:53am
I've been driving an Alto 1.0 for three years now. It's truly fuel-efficient, but the actual consumption depends on the situation. For daily city commuting with frequent stops and starts, it averages around 6 liters per 100 km. On long highway trips, maintaining a steady speed of 90 km/h, I've achieved as low as 4.2 liters. Winter heating has minimal impact, but summer AC usage increases consumption by 0.5 to 1 liter. Driving style matters too – gentle acceleration saves me about 0.8 liters compared to aggressive driving. With its small 25-liter tank, a full refill costs about 150 yuan. One tank gives me 450 km in city driving and 550 km on highways, working out to less than 0.4 yuan per kilometer. It's genuinely economical for daily transportation.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

How to Use the S Gear in the 2019 Bora?

Usage of the S gear in the 2019 Bora: The S gear is the car's sport mode. In S gear sport mode, the transmission can shift freely, but the shift timing is delayed, allowing the engine to maintain high RPM for a longer period. This enables the car to travel at high RPM in lower gears for an extended time, thereby achieving greater torque output and acceleration. While driving, simply push the gear lever into the S gear position. It is typically used for climbing hills and quick overtaking. The Bora is a compact car from FAW-Volkswagen, equipped with a 1.2T 116 horsepower L4 engine and a 7-speed dual-clutch transmission. The engine has a maximum power of 85 kW and a maximum torque of 200 Nm.
3
0
Share

What does BSM mean when displayed on a car?

BSM stands for Blind Spot Monitoring system, also known as Lane Change Assist system. It helps to avoid collisions or scrapes caused by not seeing vehicles approaching from behind when changing lanes during driving. Additional information: 1. Reducing lane-changing safety hazards: The system uses radar sensors hidden inside the left and right sides of the rear bumper to monitor the area up to 20 meters behind the vehicle in real time. If a vehicle or other obstacle is detected within the driver's blind spot, it immediately sends an alert to the receiving device installed on the edge of the rearview mirror, reducing the risk of collisions during lane changes. 2. Reducing judgment uncertainty: The Blind Spot Monitoring system minimizes uncertainty in judgment by allowing the driver to observe the distance between vehicles through the system, thereby enhancing overall vehicle safety.
11
2
Share

What to Do When the Anti-lock Braking System Light Comes On?

Car anti-lock braking system light comes on due to a malfunction in the ABS system. There are several situations when the ABS warning light illuminates: 1. There is air in the ABS system pipelines, interfering with brake pressure regulation and causing the ABS system to malfunction. 2. A computer fault occurs in the ABS system, causing the ABS warning light to come on. 3. The vehicle speed sensor fails, preventing the ABS from functioning properly. 4. ABS wiring harness aging, poor plug contact, wiring harness breakage, or external shield damage can cause the ABS to malfunction, requiring replacement of the entire wiring harness or plug.
11
4
Share

How many liters of coolant does the Audi TT require?

Audi TT requires approximately 6 liters of coolant, and the coolant should be replaced every 40,000 kilometers. If the coolant level drops below the minimum mark (the normal coolant level should be between the MIN and MAX marks) before the scheduled replacement, it should be topped up promptly to avoid affecting the engine's cooling performance. The Audi TT is a sports car equipped with a 1.8T 180-horsepower L4 engine and a 6-speed dual-clutch transmission. The engine delivers a maximum power of 132 kW and a maximum torque of 280 Nm. The Audi TT features a turbocharged intake system, with a top speed of 228 km/h and a 0-100 km/h acceleration time of just 7 seconds.
14
1
Share

How to defog the front windshield of BMW X1?

To prevent fogging on the front windshield of the BMW X1, proactive measures are necessary. Below is an introduction to the BMW X1: 1. Overview: The X1 is BMW's most compact SUV model. In terms of exterior design, the front view of the BMW X1 closely resembles the mid-cycle refresh of the X3. However, the lines from the fenders onwards feature unique designs, and the rear lines are more angular, giving the X1 a certain level of off-road capability. The compact size is also a key characteristic of the X1. 2. Model Configuration: The BMW X1's drive settings are divided into xDrive and sDrive options.
1
1
Share

What is the reason for the car wash pump not pumping water and lacking pressure?

Car wash pump not pumping water and lacking pressure is due to damaged seals or a damaged pump impeller. Below are the specific features of the car wash pump: 1. Stable self-priming: High pressure, large flow rate, high suction lift, low noise; equipped with stable self-priming function, no need to add priming water first, extremely fast self-priming speed. 2. Automatic protection: Dual automatic protection switches for overpressure and overheating, automatic shutdown protection when output pressure exceeds maximum pressure; automatic protection when temperature is too high. 3. Corrosion resistance: Combining the advantages of self-priming pumps and chemical pumps, made of various imported corrosion-resistant materials, with properties such as acid resistance, alkali resistance, and corrosion resistance.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.