What is the actual fuel consumption measurement of the Geely Xingyue L?

2 Answers
SanIvan
07/29/25 3:24am
The comprehensive fuel consumption of the Geely Xingyue L is 6.8-7.8L/100km. Currently, there are 7 models of the Geely Xingyue L available for sale: the two-wheel-drive luxury model, two-wheel-drive flagship model, two-wheel-drive premium model, two-wheel-drive comfort model, and two-wheel-drive intelligent premium model, all with a comprehensive fuel consumption of 6.8L/100km. The high-power automatic four-wheel-drive flagship model and high-power automatic four-wheel-drive premium model have a comprehensive fuel consumption of 7.8L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 9.49-10.83L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, press the accelerator gently to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and adopting slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Timely oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even engine misfires); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body at the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, and greater wind resistance means the car faces more resistance, requiring more power and thus increasing fuel consumption.
Was this review help?
9
1
Share
LaDylan
08/12/25 7:15am
As a long-term owner of this vehicle, I've found that the Geely Xingyue L's actual fuel consumption is relatively high in city driving, averaging around 9-10 liters per 100 kilometers, especially reaching up to 11 liters in congested areas or when using air conditioning. On highways, it's much more economical, roughly 7-8 liters. Since my family car is often fully loaded, this SUV's fuel consumption falls within the normal range and isn't too outrageous. I always make sure to maintain the recommended tire pressure, around 2.5 bar, as too soft tires increase resistance. Gentle driving habits really help; avoiding sudden acceleration saves fuel, and I can save a few hundred yuan on gas each month. Regular maintenance is also crucial, like timely oil changes and cleaning filters, which keeps the engine running smoother. Overall, this fuel consumption is suitable for families, more economical than some joint-venture cars, but not top-tier in fuel efficiency—don't expect to go too far on a single tank.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

What does Level 3 water-damaged vehicle mean?

Level 3 water-damaged vehicle means the floodwater has almost completely submerged the tires, at which point the water level inside the vehicle will fully immerse both the seat cushions and center console area, while also affecting numerous electrical components. Below are relevant details: 1. Classification: Level 1 is referred to as "water ingress vehicle," indicating flood depth below the chassis; Level 2 is termed "water-damaged vehicle," meaning flood depth above the chassis but below the dashboard; Level 3 is called "submerged vehicle," indicating severe flooding where water reaches above the dashboard or even submerges the roof. 2. Hazards: This condition can easily cause rusting of body components, shortening the vehicle's lifespan and compromising safety performance. For instance, water immersion leads to corrosion and rusting of electrical wiring, potentially causing sudden engine shutdowns or spontaneous combustion due to short circuits while driving, with unimaginable consequences.
4
2
Share

What to Do If There Are Small Bubbles in Car Film?

Whether it's a full-body film or window film, small bubbles will not have any impact. After a period of use, these small bubbles will disappear on their own, so there is no need to worry at all, and they will not affect usage. The appearance of small bubbles is a relatively normal occurrence during the film application process. More related information is as follows: 1. Vehicle window film needs to be applied to the front windshield, rear windshield, and the windows of the vehicle's four doors. The film applied to vehicle windows can be called sun film, heat-insulating film, explosion-proof film, etc. Its main functions are to block ultraviolet rays, prevent injuries to passengers in case of glass breakage, and provide good aesthetics and privacy. 2. It can be used directly after application and will not affect the annual inspection of the motor vehicle. However, it is important to note that the window film should be applied after the vehicle's registration is completed and not before. Also, the color of the applied window film should not be too dark, as this may reduce visibility at night.
18
5
Share

Subject 2: Should You Pull the Handbrake or Shift Gears First When Getting Out of the Car?

After completing the driving test for Subject 2, when getting out of the car, you can first shift to neutral and then pull the handbrake. Of course, you can also pull the handbrake first and then shift to neutral. There are no specific requirements for this sequence, and you can operate according to personal habits. Just remember not to forget to pull the handbrake and shift to neutral. Below is the relevant introduction: 1. Handbrake: The professional term for the handbrake is the auxiliary brake. Unlike the principle of the main brake, it uses a steel wire cable connected to the rear brake shoes to brake the car. Long-term use of the handbrake will cause the steel wire to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness, and the handbrake's travel will also increase. 2. Return Spring: The handbrake is also used in conjunction with a return spring. When the handbrake is pulled for braking, the spring is stretched; when the handbrake is released, the spring returns to its original length. Long-term use of the handbrake will also cause corresponding deformation in the spring.
2
2
Share

What are the reasons for failing the review of Subject 2 training hours?

The reasons for failing the review of Subject 2 training hours are generally two-fold. If both the training hours and mileage meet the requirements, then it is likely due to unqualified photos, which requires returning to the driving school to retake some photos. It could also be a system data error. If the training hours review is not passed, you should contact the driving school. If the issue cannot be resolved, the driving school will report the problem to the vehicle management office, which will address it as soon as possible. Below are the relevant details: 1. Training hours: According to the "Motor Vehicle Driver Training Teaching and Examination Outline," for the Subject 2 test of C1 and C2 driver's licenses, generally 16 or 14 training hours are required. However, regulations may vary in different regions, so the specific hours should comply with local requirements. 2. Learning items: Subject 2 training is divided into theoretical knowledge and practical operations. Theoretical knowledge includes basic driving operation norms and site driving knowledge, usually arranged for 2 hours of study. Practical operations involve basic driving skills such as driving posture, getting in and out of the car, starting and stopping, as well as the study of Subject 2 test items.
15
2
Share

How Long Does It Usually Take to Practice for Subject 2?

Usually 12-22 days. Here are the relevant details: 1. Training Hours: For C1 and C2 driver's license training in driving schools, the theoretical training for Subject 2 must reach 2 hours, and the practical training must reach 22 hours before taking the test. However, this standard is not strictly enforced, as many driving schools submit the exam list based on the students' proficiency level, meaning the practice time is not fixed. If you want to take the test as soon as possible, you should increase the frequency of your practice sessions at the driving school. 2. Notes: During the pre-driving preparation, you must adjust the seat and fasten your seatbelt before verifying your fingerprint. Each test item in the examination area is monitored by GPS positioning, and the control line (yellow dotted line) of each item represents the test area for that item. Once the front of the vehicle passes the control line, it means you have entered the test for that item and must complete it according to the test rules.
13
4
Share

Is Gear Shifting Required in Subject 2?

Gear shifting is not required in the Subject 2 driving test. The vehicle should remain in first gear when moving forward, and the semi-clutch method can be used to control the speed. Reverse gear is used for reversing into the parking space and parallel parking. Below are some relevant details: 1. Test Tips: Carefully control the accelerator and brake. Use the brake to slow down and the accelerator to speed up, but avoid pressing either too forcefully. For safety, it is recommended to maintain a slow speed throughout. During hill starts, be careful to prevent the vehicle from rolling back. Gradually release the brake only when you feel the car has enough power to climb the slope. 2. Failing the Test: If you fail the Subject 2 test on the first attempt, you are allowed one retake. If you do not take the retake or fail it again, the test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of test reschedules for Subject 2 and Subject 3 road driving skill tests must not exceed five times.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.