What is the act of driving against traffic?

2 Answers
NatalieLee
07/25/25 1:11pm
Driving against traffic is clearly an illegal act. 1. According to Article 35 of the 'Road Traffic Safety Law of the People's Republic of China': 'Motor vehicles and non-motor vehicles shall drive on the right side.' Therefore, driving on the left side constitutes driving against traffic. 2. Impact of driving against traffic: Driving against traffic is a serious subjective traffic violation that can lead to traffic congestion and reduced road capacity in minor cases, and major traffic accidents or even fatal consequences in severe cases. Since vehicles driving against traffic move in the opposite direction of normal traffic, it is highly likely to cause traffic violations and accidents. Once an accident occurs, the situation can be extremely severe, resulting in a high casualty rate.
Was this review help?
4
2
Share
ReedDella
08/11/25 8:39pm
As someone who has worked as a driving safety consultant for many years, I believe that driving against traffic is an extremely dangerous behavior. To put it bluntly, it means driving in the opposite direction, such as going the wrong way on a one-way street or highway. This is not only illegal but also highly likely to cause head-on collisions, resulting in injuries or fatalities. I have personally witnessed real-life cases: a nighttime wrong-way driving incident led to a three-car pileup, with vehicles destroyed and people injured. Chinese traffic data shows that accidents caused by wrong-way driving account for a relatively high proportion, especially on unfamiliar roads or after drinking. Prevention is simple: rely on mobile navigation to avoid getting lost, check road signs to confirm the direction, and absolutely refrain from driving after drinking. Developing good habits can help avoid tragedies. Safe driving is related to the happiness of every family—don’t take shortcuts to save time, as life is more important than anything else.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

How Long Does the Mandatory Traffic Insurance for New Cars Last?

Motor vehicle mandatory traffic insurance is generally valid for one year. Upon expiration of the insurance contract, the policyholder should promptly renew the coverage. Below is an introduction to mandatory traffic insurance: Definition of Mandatory Traffic Insurance: Mandatory traffic insurance is a compulsory insurance in China that all vehicles must purchase. In the event of a traffic accident, the insurance company can only compensate the party that was hit, meaning the conditions for compensation are limited. Additionally, without mandatory traffic insurance, a vehicle will lose its eligibility for annual inspection. Precautions for Expired Mandatory Traffic Insurance: If you are caught driving with an expired mandatory traffic insurance policy by traffic police, your vehicle may be impounded, and you may face a fine of double the insurance premium. Once the insurance expires, the vehicle is considered uninsured. In such cases, if an accident occurs, the insurance company will not provide compensation. Therefore, it is crucial to renew the insurance in a timely manner.
10
0
Share

What are the consequences of crossing double white solid lines when changing lanes?

Crossing white solid lines constitutes a violation of traffic markings and is easily captured by electronic surveillance, resulting in corresponding penalties. For dangerous behaviors such as overtaking, making U-turns, or reversing that are recorded by electronic surveillance or observed by traffic police on-site, the typical penalty is a fine and a deduction of 3 points. If a traffic accident occurs due to crossing white solid lines, the vehicle that crossed the lines will bear the primary responsibility for the accident. Single yellow solid line: In areas with relatively low traffic volume and narrow roads, single yellow solid lines are used to separate opposing traffic flows. On such roads, crossing or driving over single yellow solid lines is prohibited. Doing so not only risks collision with oncoming vehicles, which is extremely dangerous, but also results in penalties, including a deduction of 3 points. Double yellow solid lines: Similar to single yellow solid lines, double yellow solid lines also serve to separate opposing traffic flows, but they are primarily used on major roads with higher traffic volumes. Likewise, crossing or driving over double yellow solid lines is strictly prohibited.
12
2
Share

How to Deal with Excessive Coolant Consumption in New Cars?

First, check whether there is any leakage in the radiator. If there is a leakage point, repair it or replace it if necessary. Secondly, check whether the overflow tank, the joint surface of the water pump, and the pipe fittings of the cooling system are loose, and tighten the loose parts. Check the sealing condition of the cylinder gasket to eliminate the possibility of coolant entering the cylinder and being burned. The main reasons for rapid coolant consumption in cars are: 1. Unreasonable design of the cooling system. 2. Leakage. 3. Poor circulation leading to rapid consumption. 4. Coolant entering the cylinder and being burned. Below is some relevant information: 1. Coolant, also known as antifreeze, is a liquid composed of antifreeze additives, additives to prevent metal corrosion, and water. It has properties such as antifreeze, anti-corrosion, heat conduction, and non-deterioration. Nowadays, antifreeze mainly composed of ethylene glycol, with added anti-corrosion additives and water, is commonly used. 2. The engine cooling system of internal combustion vehicles is a liquid-cooled closed-loop system composed of cylinders, jackets, and radiators. The working condition of the cooling system directly affects the normal operation of the vehicle and its service life.
15
5
Share

Is a Manual-Automatic Transmission More Fuel-Consuming Than a Manual Transmission?

With the same driving skills and the same car model, a manual-automatic transmission consumes more fuel than a manual transmission. The related introduction of manual-automatic transmission is as follows: Introduction to Manual-Automatic Transmission: In a manual-automatic transmission vehicle, when shifting from the automatic D gear to the M gear, the clutch or brake used for a specific gear remains fixed. For example, in a 6AT transmission driving in D gear at 3rd gear, switching to M gear keeps the transmission in 3rd gear. While driving in 3rd gear, the two clutches 35R and UD inside the transmission remain engaged, keeping the transmission fixed in 3rd gear. Principle of Manual-Automatic Transmission: When the driver shifts from D gear to M gear, it does not involve switching between different gear clutches but only changes the transmission control logic. The transmission remains in a specific gear, and the TCU cannot shift gears automatically; instead, the driver must shift gears manually. If the driver wants to drive in a lower gear, the engine speed increases significantly, enhancing the vehicle's acceleration capability. If the driver prefers to drive in a higher gear, the engine speed remains lower, making the vehicle more fuel-efficient and providing a more comfortable ride.
14
1
Share

Should You Shift to P Gear or Pull the Handbrake First When Parking an Automatic Car?

When parking an automatic car, it is acceptable to either shift to P gear or pull the handbrake first. However, before shifting to P gear, you must ensure that the car has come to a complete stop, otherwise it may damage the locking mechanism of the automatic transmission. You should never shift to P gear while the car is still in motion. P gear is the parking gear and, like N gear, can be used when parking. After shifting to N gear, there is no locking mechanism to secure the transmission gears, so the car can still move if the handbrake is not engaged. N gear is suitable for short stops without turning off the engine, such as when waiting at a red light. When you shift to P gear, the locking mechanism inside the transmission will secure the gears, effectively locking the wheels in place. In this state, even without the handbrake, the car cannot move. P gear is used when parking and turning off the engine. If you do not shift to P gear before turning off the engine, the car will not shut down properly.
3
0
Share

What Principle Does the Reversing Radar Operate On?

Reversing radar systems utilize ultrasonic signals, which are controlled by the microcomputer inside the reversing radar host. Through the process of transmitting and receiving signals by the probes, the system calculates the distance to obstacles by comparing the signal's round-trip time and then issues different alarm sounds via the alarm device. Below is a related introduction to the reversing radar system: 1. The reversing radar system consists of the reversing radar ECU, the reversing radar buzzer, and several (usually 4) reversing radar sensors installed on the (rear) bumper. If a rear camera is installed, it will provide an image of the rear area of the vehicle on the navigation screen. 2. When the vehicle is shifted into reverse gear, the reversing radar ECU uses ultrasonic sensors to monitor the area around the rear bumper. If an object is detected within the monitored area, the audible alarm device inside the instrument cluster will sound a warning. The system can detect relatively hard solid obstacles as well as objects like wire mesh and fences. The detection range of the two side sensors is an area 60cm from the corners of the bumper. When the detected distance is less than 20cm on the side or less than 30cm directly behind the center, the sound signal will become continuous to prevent a collision with the bumper.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.