What is the acceptable range in centimeters for pulling over to the side of the road?

2 Answers
LeBrandon
09/01/25 5:04am
For the driving test (Subject 3), the effective distance for pulling over to the side of the road is within 30 centimeters. No points will be deducted if the distance is within 30 cm, 10 points will be deducted if the distance is between 30 cm and 50 cm, and exceeding 50 cm will result in failure. Relevant details are as follows: 1. Pulling over to the side: During the test, when the voice prompt "Please pull over to the side" is heard, the candidate should turn on the right turn signal (for more than 3 seconds) and simultaneously observe the traffic situation behind through the (right) rearview mirror. After confirming safety, the vehicle should be parked parallel to the right side, within 30 cm of the curb (or the solid edge line of the road), but without touching the curb (or the solid edge line). The vehicle should be stopped steadily, the parking brake should be engaged, and the gear should be shifted to neutral. 2. Voice prompt: After hearing the voice prompt "You have passed the test, please exit the vehicle" or "You have failed the test, please exit the vehicle," observe the traffic situation on the left side, confirm safety, and then open the door to exit the vehicle, thus completing the test. If the first attempt is unsuccessful, the voice prompt "Test failed, restarting the test" will be heard. Do not exit the vehicle; simply follow the voice prompts to continue the test.
Was this review help?
8
1
Share
Jodie
09/13/25 7:49am
After years of driving, I've learned that the qualified distance for parallel parking is usually within 30 centimeters, with 10 to 30 cm generally considered acceptable. This standard comes from driving test requirements, and my instructor often emphasized keeping the wheels within a reasonable distance from the curb. Getting too close risks scraping tires or damaging the car body, while parking too far out occupies the lane, potentially affecting traffic or causing accidents. In actual driving, I've developed the habit of checking the rearview mirror to ensure the gap between the wheel edge and curb is appropriate, no wider than the length of a foot. On rainy days or slopes, I leave some extra margin to prevent slipping—safety always comes first. With regular practice parking in empty lots to get the feel, you'll gradually master it.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Where are the positive and negative terminals of the Ford Escort battery?

The battery cover of the Ford Escort is marked with red or a '+' sign for the positive terminal, and black or a '-' sign for the negative terminal. More details about the Ford Escort are as follows: 1. The Ford Escort is powered by a new 1.5L Ti-VCT engine and a 1.0L EcoBoost engine, paired with a 6-speed automatic transmission and a new 6-speed manual transmission. 2. The Ford Escort offers a class-leading six-airbag protection system, including front airbags, side airbags, and side curtain airbags for both front and rear passengers, providing excellent collision protection. 3. The Ford Escort has body dimensions of 4587mm*1825mm*1490mm and a wheelbase of 2687mm.
18
3
Share

How to Reset the Maintenance Light on Nissan Qashqai?

To reset the maintenance light on the Qashqai, follow these steps: 1. Start the engine. 2. Use the steering wheel switch buttons to navigate the instrument display to the maintenance settings. 3. Press and hold the "TRIP-RESET" button on the center console until the data refreshes and the maintenance light resets. Additional information about the Qashqai includes: 1. The Qashqai is equipped with a 2.0L engine, delivering a maximum power output of 144 horsepower and a peak torque of 198N·m. 2. The transmission system is paired with a CVT gearbox and features a two-wheel drive mode.
6
2
Share

Where are MG's engines produced?

MG is equipped with the 'Blue Core' SGE20T engine, jointly developed by SAIC Motor and General Motors. MG's engines are divided into two models: 1. A 1.0T in-cylinder direct injection turbocharged engine. This engine has a maximum horsepower of 120 and a maximum torque of 150 Nm. 2. A 1.5L naturally aspirated engine. This engine can provide a maximum power of 169 horsepower and a peak torque of 250 Nm. Additional information: 1. The car engine is the device that provides power for the car, serving as the heart of the car, determining its power, economy, stability, and environmental friendliness. 2. Depending on the power source, car engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid power, among others.
8
4
Share

How often should the transmission fluid be changed for the 2013 Buick Excelle?

The maintenance manual for the Buick Excelle specifies that the transmission fluid should be changed every 60,000 kilometers or every three years, whichever comes first. Failure to change the transmission fluid regularly can lead to: 1. The formation of impurities in the transmission fluid due to chemical changes, which can block the oil passages and affect shifting performance. 2. Reduced lubrication properties of the transmission fluid under prolonged high-temperature operation, increasing the risk of clutch plate wear and causing stalling. Additional information: 1. Transmission fluid is a lubricant that keeps the gear system clean, ensuring proper transmission operation and extending the lifespan of the transmission components. 2. When changing the transmission fluid, it's not just the fluid that needs replacement; two other items should also be replaced and maintained. One is the transmission fluid filter, which filters out impurities in the lubricating oil; the second is the cleaning of the transmission fluid pan.
12
4
Share

What is the appropriate tire pressure for the Buick Excelle?

Buick Excelle's normal tire pressure ranges between 2.3~2.5. More information about the Buick Excelle is as follows: 1. The Buick Excelle is Buick's first five-door coupe, integrating the best dynamic genes that Buick can offer for mid-size cars, providing the new generation of young and sharp drivers with an extraordinary and exhilarating driving experience. 2. The all-new Buick Excelle adopts a new family design language and introduces the General Motors' new generation 1.3T/1.0T-Ecotec dual-injection turbocharged engines for the first time. It is equipped with the iteratively upgraded Buick eConnect connectivity technology, featuring a newly designed in-vehicle human-machine interaction interface that supports cloud-centered connected applications and services.
16
4
Share

What are the differences between the Odyssey Zhi Xiang Edition and the Luxury Edition?

The main differences between the Odyssey Zhi Xiang Edition and the Luxury Edition are as follows: 1. Price. The Zhi Xiang Edition is slightly more expensive than the Luxury Edition. 2. Configuration. In addition to LED low-beam headlights, rear privacy glass, an electronic parking brake, and rear aviation seats, the Zhi Xiang Edition also features automatic parking, lane assist, cruise control, automatic headlights, and other configurations, making it more practical to drive. Additional information: 1. Exterior. The Odyssey adopts the original Japanese sporty body kit. Compared to the current fuel-powered model, the new car's front grille has a more visually impactful design. With the addition of chrome accents, the overall front fascia appears more dynamic. 2. Powertrain. The new car is equipped with Honda's third-generation i-MMD hybrid system, which consists of a 2.0L naturally aspirated engine, dual electric motors, an e-CVT transmission, a power control unit, and a lithium-ion battery. The 2.0L engine delivers a maximum power output of 107 kW and a peak torque of 175 Nm, while the electric motors provide a maximum power of 135 kW and a peak torque of 315 Nm, with a combined output of 158 kW.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.