···
Log in / Register

What is the acceptable level of vehicle exhaust emissions?

3 Answers
MackenzieRose
07/28/25 2:52pm
Gasoline engines must meet emission standards of CO 2.30g/km and HC 0.2g/km, while large diesel engines should comply with CO 2.1g/kw·h and HC 0.66g/kw·h. Below are specific details about vehicle exhaust emissions: 1. Vehicle exhaust contains harmful particulate matter such as carbon monoxide and nitrogen oxides, with leaded gasoline posing greater health risks. Countries have implemented emission standards to control vehicle exhaust. 2. Exceeding emission limits will result in penalties. If a vehicle's pollutant emissions surpass standards and fail to rectify after ordered treatment, a fine of 200 yuan and 3 penalty points will be imposed.
Was this review help?
13
2
Share
SanElaina
08/11/25 7:19pm
I've been driving for over a decade, and passing the emissions test is quite important. During annual inspections, testing stations use equipment to measure emissions according to national standards. For example, under the current China VI standard, gasoline vehicles must have carbon monoxide levels below 1000 milligrams per kilometer, hydrocarbons below 100 milligrams, and nitrogen oxides must also be well controlled. If emissions exceed the limit, the most common issue is high emissions, which could be due to a faulty catalytic converter or excessive carbon buildup. In daily driving, using fuel from reputable gas stations and regular maintenance can prevent problems. I remember last year my car almost failed the test, but replacing the catalytic converter fixed it. Keeping emissions compliant isn't just about passing inspections—it also saves fuel and reduces pollution. I recommend avoiding prolonged idling and driving at higher speeds on city roads to help the engine burn cleaner, which naturally lowers emissions.
Was this review help?
16
3
Share
Expand All
PhoebeMarie
09/29/25 4:22am
As an environmental enthusiast, I believe the key to passing exhaust emission tests is compliance with emission regulations. Standards vary for different vehicle models, with new cars typically meeting China VI levels, where CO limits are around 0.7 grams per kilometer, HC below 0.1 grams, and NOx controlled at approximately 0.06 grams. Amid global warming trends, these standards are becoming increasingly stringent, and reducing particulate emissions is crucial for urban air quality. If your car is aging, high exhaust emissions may cause it to fail inspections, with common causes including faulty oxygen sensors or fuel system leaks. To improve, it's advisable to choose energy-efficient models, use high-quality gasoline, and avoid frequent cold starts on short trips. Regularly visit authorized service centers for emission testing to ensure levels remain well below the limits—this not only protects the environment but also extends engine life.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What is the maximum allowed speed of the Tiggo 8?

The maximum allowed speed of the Tiggo 8 is 190 km/h. The maximum speed refers to the highest driving speed that a car can achieve on a well-paved road, which is the speed when the driving resistance and driving force are balanced under windless conditions on a flat road surface. It is one of the evaluation indicators of a car's dynamic performance. The Tiggo 8 is a mid-size SUV under the Chery brand. This vehicle has a wheelbase of 2710 mm, with a length, width, and height of 4700 mm, 1860 mm, and 1746 mm respectively. The Tiggo 8 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 to 4000 rpm. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm. This engine achieves its maximum power at 5500 rpm and outputs its maximum torque between 2000 to 4000 rpm.
2
2
Share

Can a hole in the bumper be patched?

A hole in the bumper can be repaired, but it is not recommended because the bumper is a high-pressure point for wind resistance. If the craftsmanship or materials are slightly inferior, it is prone to damage again. Therefore, replacement is recommended. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. Here is an introduction to car bumpers: 1. Bumper material: The front and rear bumpers of a car are made of plastic, known as plastic bumpers. They are generally made of polyolefin and polypropylene materials, formed by injection molding. 2. Bumper composition: The plastic bumper of a car consists of three parts: the outer panel, buffer material, and crossbeam. The outer panel and buffer material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped groove; the outer panel and buffer material are attached to the crossbeam. 3. Other functions of the bumper: Plastic bumpers have strength, rigidity, and decorative properties. From a safety perspective, they can act as a buffer during collisions, protecting the front and rear of the car body. From an aesthetic standpoint, they can naturally integrate with the car body, forming a seamless whole, and serve as an important decorative component of the car's exterior.
16
0
Share

How to Reset the Engine Oil for Kia K3?

Kia K3 engine oil reset steps are as follows: 1. Press the TIPE button to display the maintenance reminder number. 2. Then hold the TIPE button for several seconds to bring up the menu with "Consumables Settings." 3. Press REST to confirm and use TIPE to select from options like 3000KM, 4000KM, and 5000KM, choosing based on the specific condition of your vehicle. 4. The engine oil reset will then be completed. Below is an introduction to Kia K3 maintenance oil: 1. For Kia K3 maintenance, you can use SN-grade oil. Kanglibo SN utilizes ANT technology, formulated with high-quality synthetic base oil PAO and imported additives, offering significant performance advantages over SL-grade oils. Additionally, when switching to the same brand's product, there is no need to clean the engine. However, if the engine is particularly dirty, it is recommended to clean it before changing the oil for better results. 2. For vehicle operation and maintenance, you can use the oil recommended by the manufacturer or opt for higher-grade oils, as premium oils can extend the maintenance interval. The highest-grade oil is SM, followed by SN, with SJ being the most commonly used. There are also fully synthetic oils, which are the most expensive, semi-synthetic oils, and mineral oils, among others.
2
0
Share

How long does it take for the 10th-generation Honda Civic to accelerate from 0 to 100 km/h?

According to official data, the 2022 10th-generation Honda Civic accelerates from 0 to 100 km/h in 8.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in naturally faster acceleration. The 2021 Buick Excelle has a maximum torque of 141 Nm and accelerates from 0 to 100 km/h in 12.87 seconds; the 2022 10th-generation Honda Civic has a maximum torque of 180 Nm and accelerates from 0 to 100 km/h in 8.9 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 2022 10th-generation Honda Civic is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The 2021 Buick Excelle has a power-to-weight ratio of 89 Hp/T and accelerates from 0 to 100 km/h in 12.87 seconds; the 2022 10th-generation Honda Civic has a power-to-weight ratio of 98.1 Hp/T and accelerates from 0 to 100 km/h in 8.9 seconds.
11
5
Share

Where Should a Child Car Seat Be Installed in a Vehicle?

Generally, child safety seats are placed in the rear seats near the doors, specifically on either side of the back seat. These positions are considered the safest in a vehicle. Among them, the position directly behind the driver is the safest. There are several methods for installing a child safety seat: Seat Belt Installation: This method involves using the vehicle's seat belt to secure the child safety seat to the car seat. LATCH Installation: LATCH (Lower Anchors and Tethers for Children) is a standardized installation system attached to child safety seats. It includes three lower anchors and one tether strap. Two of the anchors are located at the base of the seat, and one is at the top. LATCH installation requires the vehicle to have corresponding metal anchors that match the child safety seat's LATCH connectors. Fixed Installation: Some child safety seats come with built-in fixed installation devices, making the installation process simple and convenient. Child safety seats are categorized into the following types: Infant Car Seats: Designed for newborns and babies. They can be used from birth until at least age 2 or until the child reaches the seat's weight limit. These seats are designed to be used only in a rear-facing position in the vehicle. Convertible Car Seats: These seats can be used from birth until the child outgrows them. They can be used in both rear-facing and forward-facing positions, depending on the child's weight and height. All-in-One Seats: Also known as combination seats, these are similar to convertible car seats but can also function as booster seats. Booster Seats: These are used only for children in a forward-facing position, with minimum weight limits ranging from 13.6 to 18.1 kilograms. Important Notes When Using Child Safety Seats: The safety seat should accompany the child at all times; infants should use rear-facing seats with the harness straps placed through the lower slots, at or slightly below shoulder level, and the harness clip secured at the top.
2
5
Share

What does a fuel consumption of 6.8 mean?

Fuel consumption of 6.8 means 6.8 liters per 100 kilometers. Fuel consumption is an important parameter that many consumers consider when purchasing a car. The fuel consumption of a car depends not only on the car itself but also on the driver's driving habits and road conditions. Here are some additional details: Things to note: When driving, avoid sudden acceleration and deceleration, and try to maintain a steady speed. When driving in congested traffic, the car spends some time idling, during which the engine continues to consume fuel without increasing the distance traveled, leading to higher fuel consumption.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.