What is the abbreviation for license plates in Hunan Province?

1 Answers
KendraFitz
07/30/25 5:46am
Hunan license plates are abbreviated as Xiang. Here is the relevant introduction about license plate numbers: 1. The first character of the license plate represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of each (province, municipality directly under the central government, or autonomous region). 2. The second letter of the license plate represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, or league). The ranking is usually determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. The letter 'A' is the code for the provincial capital, the capital city, or the central urban area of a municipality directly under the central government, and the subsequent letters are not ranked in any particular order. 3. There are three encoding rules for the last 5 digits of the license plate number: (1) Each digit of the serial number uses Arabic numerals; (2) Each digit of the serial number can use English letters individually, with the letters O and I from the 26 English letters not allowed; (3) The serial number can include 2 English letters, with the rest being Arabic numerals, and the letters O and I from the 26 English letters are not allowed.
Was this review help?
19
3
Share
More Forum Discussions

What kind of engine oil should be used for the Yaris L?

Toyota Yaris L originally uses 5W-30 semi-synthetic engine oil. Generally, 0W-20 and 5W-20 can also be used, but 5W-30 semi-synthetic engine oil is the most suitable for the Yaris L. Here is the relevant introduction about the maintenance engine oil for Toyota Yaris L: 1. The naturally aspirated engine uses ordinary quality engine oil. Mineral oil, semi-synthetic oil, or even full synthetic oil can be used. Compared with the naturally aspirated engine, the turbocharged engine has a more precise structure and works in a more complex environment, so it requires better performance engine oil. It is necessary to choose lubricating oil with better fluidity, and full synthetic oil is the best choice. 2. It is recommended to use Castrol Magnetec 5W-30 engine oil for Yaris L maintenance, which has good lubrication effect and can effectively protect the engine.
1
3
Share

What was the last month in 2014 for the final batch of China III vehicles?

China III vehicles were last produced in October 2014. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive check of the vehicle, including checking for oil or water leaks; measure tire pressure to ensure it's appropriate; inspect the engine oil condition; verify the spare tire is intact, etc. Caution when wading: If encountering waterlogged roads, assess the water depth and road conditions underneath before determining if it exceeds the vehicle's capability. Avoid attempting to wade if the water depth exceeds half the height of the car's tires. Observe traffic rules: Avoid racing with other vehicles, drive safely in compliance with traffic regulations, and yield to pedestrians. Maintain a safe distance when following another vehicle, staying at the right rear corner of the vehicle ahead; when overtaking, pass from the left side of the vehicle in front, avoiding overtaking from the right or between two parallel vehicles.
14
3
Share

How to Adjust the Tightness of Hydraulic Disc Brakes?

Hydraulic disc brake tightness can be adjusted using the following methods: 1. There is a red plastic disc near the spoke side. Rotating this plastic disc adjusts the tightness. 2. Use the screw on the brake caliper to adjust the clearance width. 3. It is recommended that car owners visit a 4S shop or repair shop for adjustment. The main advantages of hydraulic disc brakes are as follows: 1. They provide rapid braking at high speeds, have better heat dissipation than drum brakes, maintain consistent braking performance, and are easier to install with advanced electronic devices like ABS. 2. They use metal pads instead of drum wheels, with flat brake shoes on both sides of the brake disc. When hydraulic pressure from the master cylinder is sent to the wheel cylinder, the brake shoes clamp onto the brake disc to achieve the braking effect.
10
3
Share

How to Replace the Key Battery for a Civic?

The method to replace the Civic key battery is as follows: 1. Remove the mechanical key. 2. Carefully pry open the edge with a coin to detach the upper half and open the car key cover. 3. Lift the car key cover to reveal the battery inside. 4. Take out the old battery and insert the new one. 5. Close the car key cover to complete the battery replacement. Below is more information about the Honda Civic: 1. Honda Civic offers multiple models to cater to the tastes of consumers in different countries, including three-door hatchback, hardtop coupe, hybrid version, and five-door sedan. 2. The new Civic is the domestic version of Honda's tenth-generation Civic model. It features a more youthful and sporty design and is powered by 1.5T and 1.0T engines, with the 1.5T model being launched first, equipped with a 6-speed manual or CVT transmission.
18
2
Share

What are the symptoms indicating the need for brake fluid replacement?

The symptoms indicating the need for brake fluid replacement are: 1. The brake warning light illuminates or flashes during emergency braking or continuous braking; 2. The braking distance becomes significantly longer than before during emergency braking; 3. The brake pedal feels soft or weak when pressed; 4. The braking force feels inconsistent, sometimes light and sometimes heavy during braking. The steps for brake fluid replacement are: 1. Park the vehicle on a level surface, turn off the engine, open the hood, and drain the fluid from the reservoir; 2. Use a funnel to fill the reservoir with new brake fluid; 3. Use a jack to lift the vehicle and start removing the tires from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Use a wrench to loosen the bleeder screw, attach a rubber tube to it, and connect it to a drain bottle; 6. Press the brake pedal inside the vehicle while observing the fluid drainage until the fluid level in the reservoir under the hood reaches the lower limit; 7. Start the vehicle and perform a brake test in a relatively safe area.
5
1
Share

What does 2.0T mean for a car?

2.0 refers to the engine displacement, and 2.0T indicates a displacement of 2.0 liters with turbocharging function. Extended information: 1. Displacement refers to the ability of an engine to deliver all air and fuel mixture to all cylinders during one complete cycle, and it also refers to the volume that a piston can displace when moving from one stroke to another. The compressor's displacement is the volume of gas discharged by the final stage of the compressor within a unit time, converted to the pressure and temperature conditions at the first stage inlet. 2. L stands for liter, and T stands for ton. L is the abbreviation of liter. It is the unit of volume liter, referring to the engine displacement of a car. For example, 1.5L means the engine has a displacement of 1.5 liters. T is the abbreviation of Turbo. It refers to an engine equipped with a turbocharging device. For example, 1.5T means a 1.5-liter displacement engine is equipped with a turbocharging device.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.