What is the 9AT transmission in the Avancier?

1 Answers
Scarlett
07/30/25 2:26am
The 9AT transmission in the Avancier is a ZF transmission, which is currently widely used in Buick and Chevrolet models under General Motors. It delivers excellent performance and ensures stable power output for the vehicle. Transmission maintenance methods: Regularly check the automatic transmission fluid level: Unlike engine oil, which is checked when the engine is cold, automatic transmission fluid should be preheated to approximately 50°C. Then, shift the gear lever through each position for 2 seconds before placing it in the parking gear. At this point, the normal fluid level on the dipstick should be between the maximum and minimum lines. Add automatic transmission protectant to the transmission: The recommended ratio is 5%. For older vehicles, it is advisable to add a bottle of automatic transmission leak stopper to restore aging transmission seals and prevent leaks. Understand the replacement cycle for automatic transmission fluid: Generally, the replacement cycle is 2 years or 40,000–60,000 kilometers. During normal use, the operating temperature of automatic transmission fluid is around 120°C, so it is essential to use high-quality transmission fluid.
Was this review help?
2
4
Share
More Forum Discussions

Is it necessary to display the inspection-exempt vehicle label for cars?

It is necessary to display the inspection-exempt vehicle label for cars. More relevant information is as follows: 1. Prepare the required documents: a copy of the vehicle owner's ID card, proof of payment for compulsory traffic insurance, proof of payment for vehicle and vessel tax, vehicle license, etc. 2. Points to note when purchasing insurance: When buying compulsory traffic insurance for the vehicle, you can directly use the duplicate copy of the insurance to apply for the inspection-exempt procedure. The compulsory traffic insurance document also includes records of the vehicle and vessel tax. Note that the original copy should not be left with the vehicle management office, as it will be needed for future insurance claims. 3. Fill out the application form: After preparing all the materials, fill out the application form for receiving the motor vehicle inspection label. Templates are available at the vehicle management office, and you can fill it out by following the template. If someone else is handling the process on your behalf, an additional form needs to be filled out. 4. Receive the inspection pass label: After submitting the form and all the required documents, the staff will process the information, print the inspection date, and issue the inspection pass label.
6
0
Share

How to Determine Whether the Stabilizer Bar Bushing Should Be Replaced

Here are the situations that indicate the stabilizer bar bushing needs replacement: 1. Wheel alignment deviation: When the wheel alignment is off, a wheel alignment service is required. 2. Tire tread: Uneven tread wear or differing tread depths on the left and right tires. 3. Tire pressure: Unequal tire pressure on both sides. Uneven tire pressure causes tires to differ in size, leading to inevitable pulling to one side while rolling. 4. Shock absorbers: Deformation of front shock absorber springs resulting in inconsistent damping on both sides. The condition of the shock absorber springs can be assessed by pressing down or comparing after removal; front shock absorber failure. Failed front shock absorbers cause uneven suspension height during driving, leading to imbalanced force distribution and vehicle pulling.
16
1
Share

What is the mileage for the first vehicle maintenance?

New car first maintenance is at 3 months or 5000 kilometers, whichever comes first. Before the first maintenance, pay attention to the following points: 1. Make an appointment in advance: It is best to make an appointment with the 4S store in advance, otherwise, without an appointment, you may encounter situations where there are no available service bays or long waiting times. 2. Bring necessary documents: When going for the first maintenance, bring essential items such as the maintenance manual, vehicle registration, etc. If you are unsure about which documents to bring, be sure to ask clearly when making the appointment. 3. Record problems promptly: If you encounter any faults or questions while driving, you can record them and inform the staff during the first maintenance registration. This will help the technician to check all the issues during the first maintenance.
16
1
Share

Is It Serious If a Sedan's Chassis Gets Scraped?

The exhaust pipe is located inside the chassis, so obstacles like speed bumps won't touch it. The chassis surface has a layer of protective coating, and minor scrapes generally don't cause significant harm. Here is additional information: 1. Inspection Method: If your car's chassis is scraped by an unknown object and you can't determine whether it affects driving safety, or if you're still concerned, it's recommended to take the car to a 4S shop or repair shop for inspection. Most repair shops have chassis lifts; once the vehicle is raised, any scrapes or damage on the chassis surface will be immediately visible. If only the steel plate is scraped, applying some paint will suffice. However, if the pipes are damaged, a thorough inspection and repair are necessary. 2. Precautions: When driving over road hazards like potholes, depressions, or grooves that could scrape the chassis, slow down and avoid them if possible—forcing through won't help. Additionally, drivers should be cautious of curbs and speed bumps.
5
3
Share

What is the difference between cold start and hot start in cars?

Car cold start and hot start differences are as follows: Cold start refers to starting the engine when the coolant temperature is low; Hot start means starting the engine when the coolant temperature is high, with the only difference being the temperature of the coolant. Compared to hot start, cold start has the following two disadvantages: 1. Cold start is more harmful to the car: More than 80% of engine wear occurs during the cold start phase. 2. Cold start requires more time to start the vehicle: 1) During cold start, the internal temperature of the engine is too low, making it difficult for the air-fuel mixture to vaporize and combust. 2) During cold start, the engine oil temperature is insufficient, requiring time to increase the oil temperature. 3) During cold start, the gaps between internal engine components are larger, necessitating a warm-up period for thermal expansion to gradually reach the specified clearances, as excessive gaps prevent the oil film from adequately covering and lubricating the parts.
14
0
Share

Are There Purchase Taxes for New Energy Vehicles?

New energy vehicles are exempt from purchase taxes. Currently, new energy vehicles are categorized into hybrid and pure electric vehicles, with hybrids further divided into plug-in hybrids and non-plug-in hybrids. Hybrid models, unless they are plug-in hybrids, are still subject to purchase taxes. Pure electric and plug-in hybrid vehicles do not require payment of purchase taxes. Starting from January 1, 2018, new energy vehicles listed in the "Catalog" must meet the following conditions: 1. Authorization: Pure electric vehicles, plug-in (including range-extended) hybrid vehicles, and fuel cell vehicles sold in China must be authorized. 2. Compliance: They must meet the technical requirements for new energy vehicle products. 3. Inspection: They must pass special inspections for new energy vehicles and meet the specific inspection standards for new energy vehicle products. 4. Manufacturer Requirements: New energy vehicle manufacturers or importers (hereinafter referred to as enterprises) must comply with relevant requirements in product quality assurance, product consistency, after-sales service, safety monitoring, and power battery recycling.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.