What is the 909018 tire interchangeable with?

1 Answers
OSarah
07/29/25 3:44pm
909018 tires cannot be interchanged with other tires. This is because different tire brands have different tread patterns, and their performance characteristics will certainly vary. During acceleration and braking, it is the tire's grip that matters. Take acceleration for example: if the two front tires are different, with one having strong grip and the other weak, during hard acceleration, the tire with weak grip will spin in place while the one with strong grip will propel forward, inevitably causing the vehicle to pull toward the side with weaker grip. Additional Information: 1. Precautions: Under normal driving conditions, front tires generally wear out faster than rear tires. If tire rotation has never been performed, you might replace front tires twice before replacing rear tires once. To extend tire life, regular rotation is necessary, typically every 20,000 kilometers. This ensures even wear across all four tires, allowing them to have nearly identical lifespans so that all four can be replaced simultaneously. 2. Replacement Criteria: Generally, when a tire's remaining life reaches one-third or less of its total lifespan, it should be replaced. For tires that have been driven 70,000 to 80,000 kilometers or more, or are approaching four years or older, their remaining life is usually limited. Consider the age first: regardless of usage, a new tire should be considered for replacement after five years. The mileage at which a tire wears to its limit varies by brand and driving conditions, but it typically falls between 100,000 to 150,000 kilometers.
Was this review help?
9
2
Share
More Forum Discussions

When a car light doesn't work, should the entire light be replaced or just the bulb?

When a car light doesn't work, replacing the bulb is sufficient. Below is an introduction to headlight-related content: 1. Halogen headlights: Halogen headlights are currently the most commonly used type of headlight source by major car manufacturers in various vehicles. Due to their relatively low cost, they are very suitable for lower-priced economy models. 2. Xenon headlights: Xenon lights use high-voltage current to stimulate light emission, so compared to halogen lights, they have a longer lifespan and better energy-saving effects. Moreover, their brightness is significantly increased by 300% compared to halogen lights. 3. LED headlights: LED headlights are increasingly entering people's field of vision, but when hearing about LEDs, people might think more of beautiful daytime running lights. In fact, this type of light source, with its many advantages, has become the choice for more and more car headlight illumination.
15
5
Share

Why are Luxgen 5 used cars so cheap?

Luxgen 5 has an extremely low resale value. In most cases, used Luxgen vehicles cannot be sold after being recycled. Even when they are sold, it's often at a loss. The low resale value of Luxgen is largely due to inherent issues with the product itself. Reasons why Luxgen used cars are cheap: 1. Fuel consumption: The high fuel consumption has long been criticized by the public, leading to Luxgen's low resale value and poor market reputation. 2. Quality: Besides the unacceptable fuel consumption, the quality is also poor. Various component failures, strange noises, and fluid leaks have led to numerous complaints, contributing to the low selling price of Luxgen used cars. 3. Resale value: The five-year resale rate of Luxgen is only about 50%, which is relatively low in the automotive market. The biggest issue with low resale value is the difficulty in selling recycled used cars. If they are to be sold, they can only be offered at a low price, which explains why Luxgen used cars are so cheap.
1
0
Share

Can I Keep the License Plate When Selling My Car?

License plates can be retained. Here is the relevant information: 1. Required documents for retaining the license plate: Whether the car is scrapped or transferred, you can apply to retain the original license plate. The required documents include your ID card and its copy, the 'Motor Vehicle Transfer or Registration Application Form', the vehicle's compulsory insurance certificate, the annual inspection qualification certificate, the whole vehicle factory qualification certificate, the motor vehicle origin certificate, import documents for imported vehicles, the vehicle purchase tax payment certificate, and various documents submitted during the vehicle registration process. 2. Conditions: If you want to continue using the original license plate, you need to check with the vehicle management office how long the transfer has been completed and whether it is still within the validity period. Within the validity period, you can apply to continue using the original license plate when purchasing a new car or a used car. You just need to apply to the vehicle management office transfer personnel during the final step of selecting the license plate number.
14
2
Share

Will the Insurance Company Compensate for a Water-Damaged Vehicle?

Whether an insurance company compensates for a water-damaged vehicle depends on the specific circumstances. Compensation is only possible if the vehicle is covered by both collision insurance and water damage insurance, and the vehicle was submerged with proper handling. Improper handling will result in the insurance company refusing compensation. There are three scenarios for water-damaged vehicles: 1. The vehicle is submerged while parked: If the owner has collision insurance, compensation is generally available. The insurance company will calculate the compensation based on repair or write-off costs. 2. The vehicle is submerged while driving, without restarting the engine: Both collision insurance and water damage insurance are required. Collision insurance covers costs other than the engine, while water damage insurance covers engine-related costs. 3. The vehicle stalls due to submersion while driving, and the owner restarts the engine: Restarting the engine constitutes improper handling, and the insurance company will not compensate.
19
2
Share

Can Vehicle Damage Insurance Be Used After a Vehicle Has Been Submerged in Water?

Whether an insurance company will compensate after a vehicle has been submerged in water depends on the specific circumstances. Only if the vehicle is covered by both vehicle damage insurance and water submersion insurance, and the vehicle is submerged with proper operation, is there a possibility of receiving compensation. Improper operation will result in the insurance company refusing to compensate. There are three scenarios for water-damaged vehicles: 1. The vehicle is submerged while parked and stationary: As long as the owner has purchased vehicle damage insurance, compensation can generally be obtained. The insurance company will calculate the compensation based on vehicle repairs or scrapping. 2. The vehicle is submerged while driving, and there is no secondary ignition attempt: The owner needs to have both vehicle damage insurance and water submersion insurance. Vehicle damage insurance covers costs other than the engine, while water submersion insurance covers engine-related expenses. 3. The vehicle is submerged and stalls while driving, and the owner attempts a secondary ignition: Any ignition attempt is considered improper operation, and the insurance company will not compensate.
10
0
Share

How Long After the Engine Water Temperature Reaches 100 Degrees Will Cylinder Scoring Occur?

After the engine water temperature reaches 100 degrees, cylinder scoring can occur after driving 1-2 kilometers. Below are specific details about engine cylinder scoring: 1. Causes: Engine cylinder scoring refers to the appearance of obvious longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the movement range of the piston rings. In severe cases, adhesive wear can occur, leading to difficulties in starting the engine or causing it to stall. The root cause of cylinder scoring is the inability to form an oil film between the cylinder wall and the piston rings or pistons, resulting in poor lubrication or even dry friction. 2. Prevention: The engine must be properly run-in. Correctly select the clearance between the piston skirt and the cylinder liner, as well as the end gap and side clearance of the piston rings. Maintain the cooling water temperature within the normal range of 70°C to 95°C to avoid engine overheating. Avoid overloading the engine, do not start the engine without sufficient coolant, and strengthen the maintenance of the air filter to prevent dust from being sucked into the cylinder.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.