What is the 6023 violation code?

1 Answers
Camargo
07/30/25 3:10am
6023 violation code refers to the driver operating a motor vehicle on roads other than expressways or urban expressways without driving in the designated lane. Violation codes, also known as traffic violation codes, are a set of encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. Traffic violation codes vary across different provinces in China and are typically composed of four digits, classified according to the principles of traffic laws. The first digit of the violation code represents the behavior classification code, indicating the category of the violation in the Road Traffic Law; the second digit represents the demerit point classification code, indicating the category of demerit points for the traffic violation; the third and fourth digits are sequence numbers, representing the order of the violation within the same behavior classification.
Was this review help?
9
0
Share
More Forum Discussions

How to set up automatic locking for Volkswagen Magotan?

Magotan automatic locking setup method is as follows: 1. Set in the central control screen car menu, where the automatic locking function is available. 2. Find the "Auto Lock" option and tick it, so that the doors will automatically lock while driving. Here are some related information: 1. The purpose of the automatic locking function is anti-theft. It allows the doors to lock quickly after starting to drive, preventing door-pull robberies during traffic jams or at red lights, providing a certain level of security. Its advantage is that it protects child passengers inside the car, preventing young children from opening the door handles while the car is in motion. 2. The driving automatic locking is also called speed-sensitive automatic locking: it is an electronic device that automatically presses the lock button on the door when the vehicle speed reaches the value set by the computer, preventing accidental door opening. That is, when the speed reaches a set value, the car locks automatically. The set value is generally determined by the manufacturer, mostly between 10-20km/h.
8
4
Share

Can I Use Tap Water for Car Wiper Fluid?

Car wiper fluid should not be filled with tap water. Below are the reasons why tap water is unsuitable for car wiper fluid and the correct method for refilling: 1. Tap water contains many impurities that can easily clog the wiper nozzles. Additionally, tap water lacks cleaning properties and cannot effectively remove common windshield contaminants such as insect residue, bird droppings, or grease. Wiper fluid, on the other hand, can quickly eliminate stubborn stains, oil marks, and rain residue from the windshield while forming a protective layer to prevent dust and grease buildup. This ensures smoother and quieter wiper operation, keeping the windshield clean and comfortable while maintaining clear driving visibility. It also gently protects the wiper blades. 2. To refill the wiper fluid, first open the engine hood by pulling the support rod upward, then use the rod to prop it open. Locate the wiper fluid filler inlet under the hood, which is usually marked with a corresponding symbol. Once identified, pour the wiper fluid into the designated filler opening.
17
1
Share

What to Do When the Ford Escape Battery Dies?

If the battery of a Ford Escape dies, the only solution is to jump-start it using another car's battery. Connect the positive terminal of the dead battery to the positive terminal of the working battery, and then connect the negative terminals in the same manner. Here is some relevant information: 1. In case of a sudden battery failure, contact a rescue vehicle to connect jumper cables for temporary charging to start the engine. To avoid being unable to charge when the battery dies, it's advisable to keep a set of jumper cables in the car. 2. When connecting jumper cables, it's crucial not to reverse the connection order: first connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery, then connect the negative terminal of the rescue vehicle's battery to a metal part in the engine compartment of the dead vehicle (grounding). 3. After connecting the jumper cables, start the engine of the rescue vehicle and slightly increase the engine speed. After about 5 minutes, the dead battery should receive enough emergency charge. Once charging is complete, disconnect the jumper cables in the reverse order of connection.
17
1
Share

How many cylinders does the XC40 engine have?

The Volvo XC40 is equipped with two types of engines: three-cylinder and four-cylinder. The XC40 utilizes a total of three engines: a 1.5-liter turbocharged three-cylinder engine, a low-power version of the 2.0-liter turbocharged four-cylinder engine, and a high-power version of the 2.0-liter turbocharged four-cylinder engine. Below are some details about these engines: 1. The 1.5-liter turbocharged engine has a maximum power output of 120 kW and a maximum torque of 265 Nm, with peak torque available between 1,500 and 3,000 rpm. 2. The low-power 2.0-liter turbocharged engine delivers a maximum power of 140 kW and a maximum torque of 300 Nm, achieving peak torque between 1,400 and 4,000 rpm. 3. The high-power 2.0-liter turbocharged engine produces a maximum power of 185 kW and a maximum torque of 350 Nm, with peak torque available between 1,800 and 4,800 rpm. 4. The Volvo XC40's body dimensions are 4,425 mm in length, 1,863 mm in width, and 1,652 mm in height, with a wheelbase of 2,702 mm.
7
1
Share

Why does the Audi A6 engine make a ticking sound?

The reasons for abnormal noise in the Audi A6 engine may include the following aspects: 1. Valve noise: After starting the engine, there is a "ticking" sound, which is the sound of the valves, especially when the engine is cold. This is because the oil pressure has not yet built up, and the valves are not properly lubricated. It will naturally improve after a while. This situation often occurs if the car has been parked for a long time. 2. Insufficient lubrication: Generally, during a cold start, the engine sound may be slightly louder than when the engine is warm. As long as the sound is uniform and smooth, not harsh, it is usually not a problem. This is because, when the engine is cold, the gap between the cylinder wall and the piston has not yet reached the optimal size, and the lubrication from the oil is not sufficient. Normally, when the engine block temperature reaches about 95 degrees, the sound will return to normal. 3. Oil-related issues: Poor-quality oil, not changing the oil for a long time, or insufficient oil can easily increase friction between the valves and guides, as well as in hydraulic lifters, making various sounds in the engine louder.
18
2
Share

What type of vehicle is the Livina?

Livina is a compact car, but its exterior design resembles that of an MPV. Below are the relevant details about the Livina: 1. Exterior Design: With a height of 1577mm, it features a full and smooth body while providing ample headroom for the driver. The Livina boasts a stylish appearance, with striking headlights, a distinctive front grille, and a streamlined exterior complemented by outstanding body colors. The model is well-suited for urban environments, with its short body facilitating daily traffic navigation. 2. Interior Features: Displays for DVD or VCD can be installed not only on the dashboard but also feature an in-car light filter screen that quickly adjusts brightness according to light intensity—dimming in strong light and brightening in weak light—thereby mitigating various strong lights and protecting the eyes. 3. Powertrain Configuration: Equipped with an HR16DE all-aluminum DOHC engine, it delivers a maximum power of 77kW at 5200 rpm and a maximum torque of 150Nm at 4400 rpm, with a top speed of 180 km/h. The engine is paired with either a 4-speed automatic transmission or a 5-speed manual transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.