What is the 2x function on the Mondeo key?

1 Answers
ValeriaDella
09/04/25 6:57am
The 2X function on the Mondeo car key allows the trunk to automatically pop open when pressed twice in the unlocked state. Below are the functions of the Mondeo key: 1. Lock or unlock: For the keyless system, lightly touching the door handle will automatically lock the car, while a full grip will unlock it. The side mirrors will simultaneously open or fold during this process. 2. Key left in the car: If the key is left inside the car and you move out of the sensing range, the car will not lock, and the horn will sound twice. If the key is left in the trunk, the trunk will not close and will automatically pop open. The car can only be started if the key is within the sensing range. If the car is already started and the key moves out of range, it will automatically shut off and lock after a brief delay. For the trunk, when the key is within range, touching the raised dot on the trunk handle will pop it open. 3. Button functions: The top buttons include one for locking, one for unlocking, and one for the trunk. Holding the unlock button for 5 seconds will unlock the car and fully open all windows, including the sunroof. Holding the lock button for 5 seconds will lock the car and close all windows, including the sunroof. Pressing the trunk button twice will automatically pop open the trunk.
Was this review help?
15
4
Share
More Forum Discussions

What causes the brake lights to stay on in a 2013 Ford Mondeo?

Ford Mondeo brake lights staying on may be caused by the following reasons: 1. Insufficient brake fluid: As an essential component of the automotive braking system, brake fluid transfers the force from the brake pedal through the master cylinder piston to the wheel cylinders at each wheel, enabling the brake pads to contact the wheels and stop the vehicle. 2. Faulty brake switch or failure to reset: Check for poor contact or short circuits in the brake wiring; inspect the brake pedal rubber pad for integrity, examine the brake rubber ring for severe wear, and verify if the brake switch is damaged. 3. Severely worn brake pads: Extremely worn brake pads can also cause the light to remain illuminated, necessitating brake pad replacement.
2
4
Share

What is the difference between Volvo T4 and T5?

Volvo T4 and T5 have the following differences: 1. Different engine models: The Volvo T4 engine model is B4204T44; the T5 engine model is B4204T26. 2. Different power: The Volvo T4 has a maximum horsepower of 190ps, a maximum power of 140kw, a maximum torque of 300nm, a maximum power speed of 5000 rpm, and a maximum torque speed of 1400 to 4000 rpm; the T5 has a maximum horsepower of 250ps, a maximum power of 184kw, a maximum torque of 350nm, a maximum power speed of 5500 rpm, and a maximum torque speed of 1500 to 4800 rpm.
6
2
Share

Why does the Sagitar make a buzzing sound when driving at low speeds?

The reasons why the Sagitar makes a buzzing sound when driving at low speeds: the brake pads are unevenly worn or the brake pads are misaligned. Solutions: Remove the brake pads, use an angle grinder to smooth the edges of the brake pads to avoid hard friction, and then adjust the misaligned position. Below is some relevant information about the Sagitar: 1. Safety features: Standard configurations include 4 airbags, ASR traction control system, EDL electronic differential, MASR engine torque control system, ESP vehicle dynamic stability system, etc. 2. Configurations: Standard features across all models include keyless entry and one-button start system, rearview camera, leather multifunction steering wheel, driver's knee airbag, driving mode selection, fatigue reminder, cruise control, panoramic sunroof, exterior ambient lighting, and exterior rearview mirrors, totaling 11 items.
13
1
Share

What are the length, width, and height dimensions of the Levin?

GAC Toyota Levin's dimensions are 4695mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2750mm. More information about the GAC Toyota Levin is as follows: 1. Brand Introduction: The GAC Toyota Levin features a logo with design elements similar to the GR Supra, positioned on the engine hood for a low and dynamic stance. The upper grille is slender and curves upwards at the sides, complemented by sharp eagle-eye LED headlights. The wide lower grille is covered with piano black trim, giving the car a bold and sporty appearance. 2. Configuration: The GAC Toyota Levin is equipped with a 9-inch floating central control screen and a 12.3-inch full LCD instrument panel, which displays rich information. Additionally, the new car comes with the Toyota Safety Sense 2.0 system.
1
1
Share

How to Identify Battery Quality

Methods to identify battery quality: 1. Check if the voltage is balanced when the battery is not under load, ideally reaching 12V or above; 2. When connecting a heating wire to the battery, use a multimeter to measure the current, with normal usage ranging from 10 to 12A; 3. Measure the battery voltage, and when it drops to 11V, observe if there is any discrepancy. If there is, continue discharging until one battery reaches 10.5V, then check if the difference between other batteries is 0.8V. A difference of more than 0.8V indicates a weak battery. Car batteries, also known as storage batteries, are a type of battery that works by converting chemical energy into electrical energy. Typically, the term 'battery' refers to lead-acid batteries, which are mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte.
20
4
Share

Why does the 10th-generation Civic's AC only blow air without cooling?

The reasons why the 10th-generation Civic's AC only blows air without cooling are as follows: 1. Refrigerant quality and purity: The quality and purity of refrigerant play a crucial role in vehicle AC systems. Typically, inferior refrigerant leads to inefficient AC operation. 2. Condenser and radiator: The heat dissipation condition of the condenser and radiator also affects AC performance. Long-term accumulation of debris and dust can cover these components if not cleaned regularly. 3. Refrigerant quantity: The misconception that more refrigerant is better is incorrect. During refrigerant charging, the amount must be precisely controlled - insufficient quantity causes low pressure in AC lines, while excessive quantity creates overpressure. 4. Expansion valve quality: As a key component in the refrigeration system (usually installed between the receiver-drier and evaporator), inferior expansion valves prevent the refrigerant from functioning properly.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.