What is the 2x function on the Mondeo key?

1 Answers
DeCorey
07/29/25 11:26am
The 2X on the car key means pressing it twice to open the trunk. The specific functions of the car key are as follows: 1. Remote start button: The car key has a button with a circle and 2X, which represents the remote start function. Pressing it twice will automatically start the car if it is within a certain range, achieving the effect of remote start. 2. Vehicle lock button: Pressing this button once will lock the car's doors and windows, activating the locking function. 3. Vehicle finder button: This button is marked with a red horn symbol. When used within a certain range of the car, it will make the car sound the horn and flash its lights, making it easier to locate the car.
Was this review help?
5
5
Share
More Forum Discussions

What are the dimensions of the Jetta VS5 in terms of length, width, and height?

In terms of body dimensions, the Jetta VS5 has a length of 4419mm, a width of 1841mm, a height of 1616mm, and a wheelbase of 2630mm. Below are the specific details about the Jetta VS5: 1. Powertrain Configuration: It is equipped with a 1.4T L4 turbocharged engine, model EA211-DJS. This engine delivers a maximum horsepower of 150PS, a maximum power output of 110kW at 5000-6000rpm, and a maximum torque of 250N·m at 1750-3000rpm. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The drivetrain is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. 2. Exterior: The Jetta VS5 is the first SUV model under the Jetta brand. Its front face adopts Volkswagen's X design elements, extending bidirectionally towards the hood and lower grille. The side profile design continues the Volkswagen brand's styling, with lines running throughout the body.
4
1
Share

What is the function of the buttons on the right-hand door of the Volkswagen Jetta?

The buttons on the right-hand door of the Volkswagen Jetta are used to control the vehicle's window lift. Below is a detailed explanation of the various buttons in the Volkswagen Jetta: Central Control Buttons: SYNC is the dual-zone air conditioning switch. Models equipped with dual-zone air conditioning allow separate temperature control for the driver and front passenger. The Electronic Stability Program (ESP) effectively prevents loss of control such as skidding or fishtailing, and it is generally not recommended for drivers to manually turn it off. The hazard warning lights, commonly known as the emergency flashers, serve to alert surrounding vehicles to prevent rear-end collisions. The volume adjustment buttons control the multimedia volume and can also be used to skip tracks. Door Buttons: The driver's door features a rear window lock button, one-touch up/down window control switches for all four doors, an exterior rearview mirror adjustment switch, and the trunk release button located below the door handle. Ceiling Buttons: These include the welcome light, driver's reading light, front passenger reading light, interior light switch, and sunroof switch.
15
2
Share

Where is the air conditioning filter of Roewe 750 located?

Roewe 750's air conditioning filter is located in the engine compartment, beneath the front windshield. If you wish to replace the air conditioning filter, it is recommended to visit a 4S shop or a professional auto repair shop and have a technician perform the replacement. The function of the air conditioning filter is to filter out particles and impurities in the air, ensuring fresh air inside the vehicle. Over time, the air conditioning filter can become clogged. If it is not replaced promptly after clogging, it will no longer serve its filtering purpose. Therefore, it is recommended to replace the air conditioning filter approximately every 20,000 kilometers. The Roewe 750 has been discontinued. The 2011 Roewe 750 model is positioned as a mid-size car, with body dimensions of 4865mm in length, 1765mm in width, and 1422mm in height, and a wheelbase of 2849mm. In terms of power, this car is equipped with a 1.8T inline 4-cylinder turbocharged engine and a 2.5L V-type 6-cylinder naturally aspirated engine.
5
0
Share

What is the symbol for China National VI vehicle emission standard?

The symbol for China National VI standard is 'VI'; China National I standard is 'I'; China National II standard is 'II'; China National III standard is 'III'; China National IV standard is 'IV'; China National V standard is 'V'. On July 1, 2000, China first introduced the National I emission standard. As it was based on European emission standards and aligned with international standards, Roman numerals were also used in the symbols from National I to National VI. New emission standards have been introduced every few years since then. The National VI symbol is located on the vehicle nameplate, under the passenger seat B-pillar: 1. Check the vehicle's environmental protection label: The simplest way to identify the National VI symbol is to look at the vehicle's environmental protection label, where the 'Emission Standard' section will indicate the national standard level; 2. The 'National VI Standard' is divided into two phases: 'National VI a' and 'National VI b', planned to be uniformly implemented nationwide on July 1, 2020, and July 1, 2023, respectively. However, the National VI standard is extremely stringent; its requirements are far higher than the European Euro 6 emission standards and the U.S. Tier 3 standards, making it one of the strictest emission standards globally. The implementation period for the National VI standard will also be longer.
7
5
Share

How many MPV models does Mercedes-Benz have?

Mercedes-Benz has three MPV models, including the V-Class, Vito, and Sprinter, each with the following performance characteristics: Mercedes-Benz V-Class Performance: This vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum power of 155 kW and a maximum torque of 350 Nm. It features a four-wheel air suspension system. The initial throttle response is slightly sluggish, and the starting process is not very effortless, which is somewhat related to the relatively heavy body weight of the Mercedes-Benz V-Class. The transmission can quickly detect the driver's intentions and provide corresponding feedback. The flat floor below allows unrestricted freedom of movement for the feet. Mercedes-Benz Vito Performance: The Vito comes standard with four-wheel ventilated disc brakes, dual airbags, full-length pre-tensioned three-point seat belts, and 10 ultrasonic sensors, among other configurations, ensuring safe driving. A 3430 mm wheelbase provides an ultra-large interior space. The front-engine, rear-wheel-drive layout gives the Vito better acceleration and off-road capability. The original imported powertrain combination and Daimler's technology offer a highly efficient and low-consumption driving experience while meeting more environmentally friendly emission standards. Mercedes-Benz Sprinter Performance: The steering assistance is just right—neither too light nor too heavy—with clear road feedback. The tire noise is relatively loud when unloaded, and the steering wheel is somewhat heavy. The overall vehicle size is large, making handling feel a bit sluggish.
19
1
Share

Where to Buy Inventory Cars?

Inventory cars can be purchased at 4S stores or car dealerships. Methods for selecting inventory cars: 1. Check the exterior: When choosing a new car, you can request to compare two models of the same type. Pay attention to the body gaps and paintwork. There are techniques for this observation—focus on the gaps between the bumper and the body, door gaps, and the gaps between the front and rear bumpers. Open the doors to check for any color differences between the interior and exterior paint. For the paintwork, good lighting conditions are crucial. The best lighting is natural daylight, as it reveals all flaws. If selecting a car in a showroom, observe it at an angle against the daylight for a similar effect. 2. Check the mechanics: A well-functioning engine should have no oil stains on the exterior, respond quickly and sensitively when started, run smoothly without shaking, produce even sounds, and have no sharp or irregular noises. When cold, the idle speed should be slightly higher, around 1,000 RPM on the tachometer. After the water temperature rises, the idle speed should drop to around 780 RPM. At this point, lightly pressing the accelerator should result in a responsive reaction without knocking or loose sounds. Touching the engine cover should reveal no significant vibrations, and when sitting inside the car, the engine noise should be barely audible. If unsure about these aspects, comparing two running engines side by side is also a good method.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.