What is the 0-100km/h acceleration time of the Xingyue?

2 Answers
DeJocelyn
07/29/25 9:51am
The 0-100km/h acceleration time of the Xingyue is approximately 7.21 seconds. The 0-100km/h acceleration is a direct reflection of a car's power. Taking the 2019 Dark Knight Edition Xingyue as an example, it belongs to the compact SUV category with body dimensions of 4605mm in length, 1878mm in width, and 1643mm in height, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1670kg. The 2019 Dark Knight Edition Xingyue features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 238PS, a maximum power of 175kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
Was this review help?
11
5
Share
DeVivian
08/13/25 11:48am
I often pay attention to auto show data. The Geely Xingyue's 0-100 km/h acceleration time is generally around 7.7 seconds under standard testing conditions. This performance comes from the 1.5T engine version, delivering approximately 175 horsepower, paired with a 7-speed dual-clutch transmission for smooth operation. The engine's torque output is consistent, and with a vehicle weight of 1.5 tons plus good tire grip, the acceleration response is quick. In daily driving, it's swift from traffic light starts and makes highway overtaking more convenient. Several factors affect acceleration, such as temperature and tire wear, and regular maintenance is recommended to avoid power loss. This time is slightly faster than competitors like the Honda CR-V, boosting driving confidence in practical use. Actual test data may vary slightly depending on mode selection, with sport mode offering more agility.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What to Do If the Windshield Wiper Freezes While Driving?

If you find that the windshield wiper is frozen, never force it to start. At this time, you should turn on the front window heater to let the ice melt and dry slowly. You can also use warm water or winter windshield washer fluid to let the ice melt slowly. Never force the wiper to start. Alternatively, you can drive the car to a place with a higher temperature to let the ice melt and dry slowly. Never force the wiper to start, as it may damage the wiper. After each use of the wiper, clean the remaining ice on the wiper blade in time. And when leaving the car at night, place a towel between the wiper blade and the glass.
12
0
Share

How to Lift the Wiper Blades on an Audi A4?

First, turn off the car. Then, within 10 seconds, activate the windshield washer switch by pulling the wiper stalk toward yourself. Some models may use a physical button instead. After pressing the windshield washer switch, the wiper blades will automatically move to the center position of the windshield. Finally, manually lift the wiper blades upright. To reset them, simply reverse the steps. Wiper blades are used to clear rainwater from the windshield. Never operate them dry, as the increased friction can damage the rubber blades and the wiper motor.
13
3
Share

How to Press the Clutch to Prevent Sudden Speed Changes

Since driving requires maintaining clutch stability for extended periods, the left foot should not be suspended; a proper heel support point must be found. When pressing the clutch, it should be depressed quickly and then lifted gently to prevent the vehicle from lurching forward abruptly, ensuring smooth speed control. If the vehicle starts moving slowly, immediately stop releasing the clutch to maintain controlled slow movement. When raising the clutch to about one-third of its height, use the entire heel as a pivot point to control the clutch, ensuring slow and steady operation. Since each person's height varies, seat positions differ as well. To ensure stable clutch operation, the seat position must be adjusted in advance.
8
4
Share

How to Deal with Snow on the Car?

Start the car first, turn on the heater, and direct the warm air toward the front windshield. Use a brush or towel to remove the snow. If there is ice, residues can be cleared with tools like an ice scraper or plastic scraper. After most of the snow is removed and the ice on the windshield has melted, the driver can then use the wipers normally to clear any remaining residue. If there is a lot of snow on the side of the car body, opening and closing the doors a few times will cause the snow to fall off. This snow does not affect driving visibility and can be ignored. Snowflakes on the rearview mirror can be wiped off with a cloth, gloves, or directly by hand.
19
1
Share

How to Deal with Water Leakage in the Trunk of an Arrizo 5?

Remove all items from the trunk, then dismantle the decorative panel. After removing all the plastic rivets and screws, take out the decorative panel. There are 3 screws behind the taillight. Remove all of them, disconnect the taillight connector, and pull the taillight backward to remove it. There are 2 screws near the area below the exhaust pipe and 5 screws behind the tire. After removing all these screws, you can take off the bumper. After removing the rear bumper, take down the box to clean the accumulated water inside. Once cleaned, reapply silicone sealant around the edges and then reinstall the components.
3
4
Share

What to Do When a Tire Blows Out on the Highway?

Try to pull over to the emergency lane. After stopping the car, turn on the hazard lights and place the triangular warning sign 150 meters behind the car in the direction of oncoming traffic. At the same time, do not stay in the emergency lane or inside the car. Move to the outside of the guardrail and wait for assistance. At this point, you can call the national highway emergency rescue number 12122 or change the spare tire yourself. If a tire blows out on the highway, stay calm, use engine braking to let the car glide slowly, which means manually shifting gears.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.