What is the 0-100km/h acceleration time of the Binrui 1.4T?

Is engine oil not changed during the first maintenance?

First maintenance requires changing the engine oil. The items covered in the first maintenance are quite simple, mainly including replacing the engine oil and oil filter, along with some routine vehicle inspections such as checking the wear on tires and brake pads, the levels of various fluids in the engine compartment, the level of coolant, lifting the vehicle to inspect the chassis for any signs of impact, and checking if the chassis brackets and tie rods are deformed. The primary purpose of changing the engine oil is to ensure the engine operates more efficiently. During the break-in period, the engine may generate some impurities internally, hence the need to replace the oil and oil filter to better lubricate the various components inside the engine.

15

2

Share

How many seats does the Great Wall Haval H5 have?

Great Wall Haval H5 is a 5-seater. This vehicle is an ORV off-road model under Great Wall Motors, equipped with intelligent and comfortable features such as a smart sunroof, DVD reverse camera, GPS, four-probe reverse radar, automatic integrated air conditioning, anti-glare interior mirror, four power windows, remote central locking, and a leather multifunction steering wheel. In terms of power, the Haval H5 is equipped with a 2.0T gasoline or diesel engine, delivering maximum power outputs of 190 horsepower and 150 horsepower respectively, with peak torques of 250 Nm and 320 Nm. Both engines are paired with a 6-speed manual transmission. Safety features include an energy-absorbing steering column, child seat anchors, child safety seat belts, and a safety alert system, among others.

9

0

Share

What is the time interval between each subject of the driving test?

The time intervals between each subject of the driving test are as follows: 1. Time intervals: Those who fail Subject 1 can retake the test immediately. Those who fail twice must reschedule and rearrange the test. After passing Subject 2, you can take Subject 3 after 2 weeks. Those who fail Subject 4 can retake the test after an interval of 10 days. 2. Additional notes: If you do not participate in the retest or fail the retest, the current test will be terminated, and the applicant must reschedule the test. Subject 2 and Subject 3 tests must be rescheduled after 10 days. During the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times.

10

1

Share

What Causes the Squeaking Sound When the Steering Wheel is Turned to the Full Lock?

The squeaking sound when the steering wheel is turned to the full lock is caused by: 1. Faulty plane bearing or top rubber mount; 2. Malfunction of the clock spring inside the steering wheel. The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque and then transmit it to the steering shaft. It mainly consists of a skeleton, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB). The steering wheel is generally connected to the steering shaft via a spline. The steering intermediate shaft, serving as a connecting piece between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel in the vehicle more reasonable.

14

5

Share

When reversing, which way does the steering wheel turn to make the rear of the car go in that direction?

When reversing, turning the steering wheel to the left will make the rear of the car move to the left; turning the steering wheel to the right will make the rear move to the right. Here are some precautions for reversing: 1. Adjust the rearview mirror properly: Due to differences in height, the rearview mirror needs to be adjusted in time to avoid obstructed vision when looking directly behind. 2. Control the speed: Beginners must control the speed when reversing, as this is the premise for ensuring safety. Otherwise, excessive speed will increase the likelihood of accidents. 3. Pay attention to reversing in special areas: Be especially cautious when reversing in places with dim lighting, such as garages or underground parking lots. Turn on the low beams in advance, and not only observe the distance from vehicles on both sides but also accurately judge the depth of the car entering the parking space.

8

2

Share

Where is the Volkswagen CC steering assist force adjustment button?

This force is preset by the manufacturer and cannot be adjusted. If adjustment is desired, the steering system must be replaced. More details about the Volkswagen CC are as follows: 1. Body dimensions: Length, width, and height are 4812mm, 1855mm, and 1417mm respectively, with a wheelbase of 2712mm. 2. Powertrain: The Volkswagen CC is equipped with a high-power 380TSI 2.0-liter inline four-cylinder turbocharged engine, delivering a maximum output power of 220 horsepower and a peak torque of 350 Nm, paired with a 7-speed dual-clutch transmission. 3. Features: To enhance the driving experience of the CC Shooting Brake, it comes with a Harman-Kardon audio system and interior ambient lighting with 30 color options.

14

1

Share

What is the 0-100km/h acceleration time of the Binrui 1.4T?

Is engine oil not changed during the first maintenance?

How many seats does the Great Wall Haval H5 have?

What is the time interval between each subject of the driving test?

What Causes the Squeaking Sound When the Steering Wheel is Turned to the Full Lock?

When reversing, which way does the steering wheel turn to make the rear of the car go in that direction?

Where is the Volkswagen CC steering assist force adjustment button?

Which engine is used in the Trumpchi GS5?

Is the Volkswagen CC classified as a B-segment or C-segment car?

What is a Vehicle's VIN Code?

What are the front and rear suspension types of the Volkswagen CC?