What is the 0-100km/h acceleration time for the new Teana 2.0t?

How to Use Service Brake When Parking on an Uphill Road?

When parking on an uphill road using the service brake, the method is as follows: Braking means stopping the vehicle. When driving uphill, the speed naturally decreases due to gradient resistance, resulting in a shorter braking distance compared to level roads. Therefore, braking should be applied later than on level roads, with only light braking needed on gentle slopes. The method for using the service brake when driving downhill is: When driving downhill, the speed gradually increases due to gravity, so the braking distance for stopping on a downhill road is longer than on level roads, requiring earlier braking than on level roads. The brake is divided into the service brake (foot brake) and the parking brake (hand brake).

10

5

Share

Should the clutch be fully depressed all the time when pulling over?

Pulling over does not require keeping the clutch fully depressed all the time. Because cutting off the power may reduce vacuum assist, resulting in longer braking distance. Keeping the clutch fully depressed is equivalent to coasting, which can make a high-speed vehicle losing power appear passive and unsafe. Generally, the clutch is used during gear shifting, semi-engagement, and speed control. The car clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission.

15

5

Share

What is the trunk size of the Camry?

The trunk dimensions of the Camry are 980mm in depth, 1080mm to 1660mm in width, and 520mm in height. Taking the Camry 2021 2.0E Elite Edition as an example, its body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The body structure is a 4-door, 5-seater sedan. The Camry is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 178ps, a maximum power of 131kw, and a maximum torque of 210nm. It is paired with a CVT continuously variable transmission (simulating 10 gears). The front suspension type is MacPherson independent suspension, and the rear suspension type is an E-type multi-link independent suspension.

19

1

Share

What is the minimum age requirement for obtaining a C1 driver's license?

The minimum age requirement for obtaining a C1 driver's license is 18 years old. In 2020, the upper age limit for applying for a small car driver's license was relaxed. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities to ensure their physical condition meets the requirements for safe driving. Physical examination requirements: Motor vehicle drivers aged 70 and above (including 70 years old) must undergo an annual physical examination, while those under 70 years old are not required to do so. Permitted vehicle types: The C1 driver's license allows driving small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Vehicles not permitted with a C1 driver's license: large buses, tractors, urban buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.

2

0

Share

What are the reasons for the Ford Focus trunk not opening?

The reason the Ford Focus trunk won't open is either an issue with the linkage rod or the lock cylinder. If you've been using the remote to open the trunk lid, the lock cylinder might be dirty or rusted. Spraying rust remover into the lock cylinder a few times should allow it to open. Taking the Ford Focus 2021 Sedan 1.5L Manual Fengyue model as an example: This vehicle is manufactured by Changan Ford, classified as a compact car with a gasoline energy type. The car's dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. It features a naturally aspirated intake form, front-wheel drive, MacPherson strut front suspension, and a torsion beam rear suspension.

11

0

Share

What does it mean when the EPC light in a sedan is on?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is a diagnostic check of all vehicle sensors before driving. Typically, if the engine is not started, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other circumstances, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: This includes issues such as substandard fuel, fuel degradation, or poor fuel atomization. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also cause the EPC light to illuminate. ECU control unit fault: This may involve interference with the vehicle's computer signals or false alarms from the computer. Brake light fault: This includes situations where the brake lights fail to illuminate, the brake switch malfunctions, or there are issues with the brake wiring. Solutions for when the EPC light is on: Troubleshoot the intake system, use fuel with the appropriate octane rating, and clean the throttle body. Remove carbon deposits from relevant components. Re-flash the ECU data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains on. If it does not, the issue may have been a temporary glitch. If the light stays on or frequently illuminates, it is advisable to drive to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system will take predefined actions to address the issue. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a more severe issue, requiring immediate stopping of the vehicle and contacting a professional for repairs. Continuing to drive with a red EPC light can damage core components or compromise safety.

17

4

Share

What is the 0-100km/h acceleration time for the new Teana 2.0t?

How to Use Service Brake When Parking on an Uphill Road?

Should the clutch be fully depressed all the time when pulling over?

What is the trunk size of the Camry?

What is the minimum age requirement for obtaining a C1 driver's license?

What are the reasons for the Ford Focus trunk not opening?

What does it mean when the EPC light in a sedan is on?

How to Adjust the Steering Wheel Up and Down?

How to restart an Audi A4L with a black screen?

Is a Four-Wheel Alignment Necessary After Replacing Shock Absorbers?

What to Do If It Rains Right After Crystal Coating?