What is the 0-100km/h acceleration time for the 2.0T Teana?

2 Answers
SanSarah
09/04/25 6:12am
2.0T Teana accelerates from 0-100km/h in 6.9 seconds. It is a mid-size sedan under Dongfeng Nissan, with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, a wheelbase of 2825mm, a fuel tank capacity of 61.3 liters, a trunk capacity of 586 liters, and tire specifications of 205/65R16. The 2.0T Teana is equipped with a naturally aspirated engine, delivering a maximum power of 115kW at 6000rpm and a maximum torque of 197Nm at 4400rpm, paired with a continuously variable transmission (CVT).
Was this review help?
12
2
Share
MacTessa
09/16/25 7:08am
As someone who frequently pays attention to car performance, I think the Nissan Teana 2.0T's 0-100 km/h acceleration is around 7.8 seconds, which is quite reliable. I personally experienced it during a test track drive. The turbocharged engine responds quickly, and paired with the CVT transmission, the throttle feels smooth, with no sluggishness at startup. When driving on highways, overtaking is effortless and safe, never making you feel underpowered. However, acceleration times can be significantly affected by weather conditions—for example, on rainy days with slippery roads, it might slow down to around 8 seconds. This car is more suitable for family use, being fuel-efficient and comfortable, making long drives less tiring. Don’t just focus on speed; the overall driving experience matters more, as safety should always come first.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What is the method for replacing car brake fluid?

Replacing car brake fluid simply involves locating and opening the brake fluid reservoir, using a syringe to extract the old brake fluid, and then adding new brake fluid. Below is some relevant information about brake fluid: 1. Function of brake fluid: Brake fluid has a low freezing point and excellent fluidity, along with an extremely high boiling point. It does not create vapor lock under high temperatures, thus preventing corrosion of metal and rubber components. 2. Replacement interval: The replacement cycle for brake fluid can be appropriately advanced or delayed based on factors such as vehicle usage, mileage, driving conditions, and brake responsiveness.
6
4
Share

How to Clean Scale in Car Radiator?

Methods to remove rust and scale from the radiator are as follows: 1. Manual cleaning: First, remove the car radiator and use tools like scrapers or shovels to eliminate the scale. Although this method can remove scale, it is inefficient, labor-intensive, and may not clean thoroughly, potentially causing secondary damage to the radiator; 2. Using a descaling agent: Requires dismantling the radiator. If not completely removed, it can leave a strong odor, has high corrosiveness, and may lead to radiator aging, shortening its lifespan; 3. Using a professional car radiator descaler: Simply pour the specialized scale remover into the car's water circulation system, let it soak, idle cycle, or drive for 20-30 minutes, then drain the descaler from the radiator and system. Rinse repeatedly with water to effectively remove various harmful substances like scale, rust, and mud from the car radiator.
10
0
Share

What Causes the Car to Pull to One Side When the Steering Wheel is Straight?

The reasons why the car pulls to one side when the steering wheel is straight: inconsistent tire pressure on both sides. Solution: Go to an auto maintenance shop for a four-wheel balance alignment. More information about tire pressure is as follows: 1. Lateral stiffness is an important parameter that determines the handling stability of a car. Tires should have high lateral stiffness to ensure good handling stability. Tire pressure is an important factor affecting lateral stiffness; the higher the tire pressure, the greater the lateral stiffness. However, once the pressure is too high, the stiffness no longer changes. 2. By appropriately reducing the tire pressure, the tire deformation can be increased, expanding the contact area between the tire and the ground, thereby improving adhesion and ensuring the car has good braking performance.
14
1
Share

What is the reason for the starter clicking but not starting when turning the key?

Use a household multimeter to measure whether the car battery voltage reaches 12V. If the measured voltage is less than 10V, the vehicle cannot be started, and the battery must be charged using a charger or jump-started with another battery. The following are the reasons and solutions for a car failing to start: 1. Use a multimeter to check if there is power at the starter's power supply terminal. If not, it indicates a power supply issue in the starting system, and the starter wiring needs to be checked for looseness, breakage, or aging. 2. If the starter is normal, the ignition system needs to be checked. It is possible that the spark plug's ignition end is contaminated with oil, and each spark plug should be removed and cleaned individually.
2
4
Share

What is the green book of a car?

Green book generally refers to the motor vehicle registration certificate. More information about the motor vehicle registration certificate is as follows: 1. The motor vehicle registration certificate is the legal proof of vehicle ownership, kept by the vehicle owner and not carried with the vehicle. When handling any vehicle registration procedures such as transfer or change of ownership in the future, the vehicle registration certificate must be presented, and relevant vehicle information will be recorded on it, equivalent to the vehicle's "household registration book." 2. If the motor vehicle registration certificate is lost, missing, or damaged, the vehicle owner should apply for a replacement or reissue at the local vehicle management office where the vehicle is registered. 3. To apply for a replacement motor vehicle registration certificate, the vehicle owner must bring the vehicle to the vehicle management office. If the vehicle owner is a natural person applying for a replacement "Motor Vehicle Registration Certificate," they must apply in person and cannot authorize an agent.
11
3
Share

How to Solve Transmission Oil Leakage?

Solutions for oil leakage between the car engine and transmission are as follows: 1. Oil leakage between the engine and transmission is usually caused by two scenarios: one is the engine's rear crankshaft oil seal, where poor sealing leads to engine oil leakage. The other is the transmission's front oil seal, where poor sealing results in transmission oil leakage. 2. After identifying the leakage location and the type of oil, check if the corresponding oil level is low. If it is, replenish it promptly. This also indicates that the leakage might be severe, and it is recommended to conduct a repair as soon as possible. 3. To resolve the leakage issue, replacing the oil seal is necessary. It doesn't always require disassembling the engine block; specialized tools are usually sufficient. If the leakage is not severe, it can be temporarily left untreated as long as the oil level is adequate, which does not affect the vehicle's operation.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.