···
Log in / Register

What is the 0-100km/h acceleration time for the 10th-generation Accord 260?

5 Answers
WyattAnn
07/28/25 7:29pm
The 0-100km/h acceleration time for the 10th-generation Accord 260 is 7.6 seconds. The 0-100km/h acceleration time refers to the time taken to accelerate from 0 to 100km/h, which is the most intuitive reflection of a car's power. Related introductions are as follows: Accord's powertrain technology: The 2.4L i-VTEC engine, based on Honda's unique VTEC technology, adopts direct injection, Atkinson cycle, and VTC (Variable Valve Timing Control), and introduces an EGR (Exhaust Gas Recirculation) system, improving fuel economy by 13% and increasing maximum torque by 8%. The CVT transmission uses a high-strength belt to achieve a wide gear ratio, providing efficient power delivery. Through the "G-Design Shift" control technology, it quickly responds to the driver's demands. The relationship between vehicle mileage and fuel consumption: The fuel consumption published by manufacturers is generally the constant-speed fuel consumption at 90km/h, but this does not mean that this speed is the most fuel-efficient. In fact, the faster the car goes, the greater the wind resistance, and the higher the corresponding fuel consumption. During high-speed driving, often more than half of the fuel consumption is used to overcome resistance.
Was this review help?
6
5
Share
VanSawyer
08/11/25 11:20pm
The 0-100km/h acceleration time of the 10th-generation Accord 260 is approximately 7.6 seconds, which stands out impressively among its peers. This is attributed to Honda's efficient 1.5T turbocharged engine, delivering 192 horsepower and paired with a CVT transmission for remarkably smooth acceleration response. The driving experience offers strong initial thrust, allowing easy takeoffs at traffic lights with linear power delivery and no lag. It performs exceptionally well in urban driving with quick low-speed response, while also providing confidence during highway overtaking. During testing, ensure to choose dry, straight roads—safety first; noticeable wind noise at high speeds indicates slightly insufficient sound insulation; fuel consumption is well controlled at around 7.8L/100km combined. Regular engine maintenance and tire pressure checks help maintain optimal performance. Overall, the Accord 260 balances power and fuel efficiency, making it ideal for family users who value driving pleasure, with significantly improved acceleration over its predecessor, showcasing Honda's technological evolution.
Was this review help?
4
1
Share
Expand All
StSabrina
09/30/25 5:38am
I've driven the 10th-generation Accord 260 quite a few times, with a 0-100km/h acceleration around 7.6 seconds – the official data is reliable. In real-world experience, it starts off agile, easily picking up speed when the light turns green, and overtaking is no problem. This 1.5T engine delivers torque at low RPMs, providing strong push-back sensation while remaining smooth and not abrupt; the CVT transmission responds quickly without any jerking. It's fuel-efficient for city commuting, with a combined fuel consumption of about 8L, even better on highways; however, prolonged use in Sport mode can strain fuel consumption. A small tip: don't rush to push acceleration when the car is new—keep RPMs steady during the break-in period for more stable engine maintenance later. Also, check tire wear as grip affects acceleration safety. Overall, it's flexible and practical, priced slightly higher than its competitor, the Teana 260, but worth it for the performance. Compared to peers, it delivers direct power output, light and nimble handling, making it suitable for daily driving with a bit of excitement.
Was this review help?
6
5
Share
Expand All
Una
09/30/25 5:40am
The 0-100km/h acceleration of the 10th-generation Accord 260 is approximately 7.6 seconds, a highlight in the Honda family. Compared to the previous generation Accord's around 9 seconds, this improvement is significant, credited to engine lightweighting and efficient tuning. The competition in the same class is fierce: the Teana 2.0T accelerates in just over 7 seconds, faster but more expensive, while the Camry Hybrid takes about 8 seconds, slightly slower but quieter and more economical. The Accord's 1.5T small-displacement design delivers ample power without being fuel-thirsty, offering quick response at traffic lights and stable, powerful overtaking on highways. The engine responds promptly, paired with a smooth transmission without lag; however, wind noise increases at high speeds, affecting comfort. When purchasing, compare acceleration data across models and test drive to feel the real performance; in the long run, proper maintenance and oil can prolong engine life. This speed is sufficient for both city and highway driving, but safety comes first—avoid risky tests. Honda consistently emphasizes sportiness, and this car deserves praise for its cost-performance ratio.
Was this review help?
9
0
Share
Expand All
VonTanner
11/13/25 7:30am
From a daily driving perspective, the 10th-gen Accord 260 accelerates from 0-100km/h in about 7.6 seconds, delivering an enjoyable driving experience. It offers quick starts at city traffic lights, eliminating worries about being cut off, while highway overtaking is effortless with instant power response. The 1.5T engine is efficiently designed to maintain performance with low fuel consumption, averaging 7-8L/100km. However, engine noise becomes noticeable during hard acceleration, though the suspension handles bumps steadily. Practical considerations include exercising caution during rainy-day acceleration to prevent wheelspin—quality tires can enhance grip. Routine maintenance like air filter and oil changes ensures smooth acceleration. The steering is precise and user-friendly, with quicker acceleration than its predecessor, making it more appealing to younger drivers seeking fun. However, wind noise during long trips can be intrusive; closing windows or using the audio system helps. Overall, it strikes a balance between power and practicality—fuel-efficient yet potent—making it a worthy family consideration.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Where to Check the Battery Level of a Prado?

Toyota Prado does not allow viewing of the battery level. The battery is an essential part of the vehicle, which can be divided into traditional lead-acid batteries and maintenance-free batteries. It has advantages such as no need to add any liquid, easy connection to terminals, and long power storage time. The following are the functions of the battery: 1. When starting the engine, it provides a strong starting current (about 10A) to the starter. 2. When the generator is overloaded, it can assist the generator in supplying power to electrical devices. 3. When the engine is idling, it supplies power to electrical devices. 4. The battery also acts as a large-capacity capacitor, protecting the vehicle's electrical appliances. 5. When the generator's terminal voltage is higher than the electromotive force of the lead battery, it converts part of the electrical energy into chemical energy for storage, which is charging.
12
2
Share

What Causes Car Shaking After Ignition?

Car shaking after ignition can be caused by: 1. Low ignition energy; 2. Poor fuel atomization at low temperatures; 3. Fuel requiring higher ignition energy; 4. Increased spark plug gap due to prolonged vehicle use; 5. Severe engine carbon buildup; 6. Poor performance of the ignition system or weak spark plug firing; 7. Unstable fuel pressure. Solutions for car shaking after ignition: 1. If disassembling the intake tract for cleaning is not feasible, use a no-disassembly fuel system cleaning device, though the effect may not be as ideal as disassembly; 2. Consider replacing the spark plugs, or clean them and adjust the gap if possible for continued use.
4
4
Share

Can You Drive with 0.4 Tire Pressure?

Tire pressure at 0.4 bar is too low to drive. Modern vehicles are equipped with tire pressure monitoring systems, which typically alert when the tire pressure drops below 1.5 bar. It is advised not to go below this value, as excessively low tire pressure can lead to severe consequences, including tire blowouts, which pose significant risks. Hazards of Low Tire Pressure: Increased friction with the road surface, leading to higher fuel consumption; Heavier steering wheel and tendency to veer, compromising driving safety; Excessive movement of tire components, causing abnormal heat due to over-compression; Reduced functionality of the tire's cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, and damage to the bead area, resulting in abnormal wear; Dramatically increased friction with the ground, causing rapid temperature rise, softening of the tire, and a sharp decrease in strength. High-speed driving under such conditions may result in a blowout; Increased deformation of the tire body, leading to cracks on the sidewalls, excessive flexing, overheating, accelerated rubber aging, fatigue of the cord layers, cord breakage, and increased contact area with the ground, speeding up wear on the tire shoulders.
9
4
Share

What is the starting current of a sedan?

When starting, the maximum instantaneous current of a car battery can exceed 300A, and the car requires 300 to 500 amperes of current at the moment of starting. Below is an introduction to the principle of starting current: 1. Motor starting: At the instant the motor is powered on, when the motor is in a stationary state, the rotor is motionless, and the rotor speed is 0. The synchronous rotating magnetic field cuts the rotor winding at the maximum speed, inducing the highest electromotive force in the rotor winding and generating a large current in the rotor winding. This current will counteract the magnetic flux of the stator field. To maintain the original magnetic flux compatible with the power supply voltage, the stator winding will automatically increase the current. Because the rotor current is very large at this time, the stator current of the motor will also increase significantly, up to 5 to 7 times the rated current. This is the reason why the motor has a large starting current. 2. Starting current: The starting current (CCA) index refers to the minimum current obtainable under specific conditions at -17.8°C and -28.9°C. This index links the starting capability of the battery with important variables such as engine displacement, compression ratio, temperature, starting time, the technical state of the engine and electrical system, and the minimum operating voltage for starting and ignition.
15
5
Share

How to Replace the License Plate Light on a Camry?

Here are the steps to replace the license plate light on a Camry: 1. First, prepare a new license plate light and a flat-head screwdriver. Use the screwdriver to pry one end of the license light socket. If it doesn't budge, try prying the other end. Then remove the old bulb and install the new license plate light to complete the replacement. 2. The car license plate light is turned on at night or in low-light conditions along with the position lights to illuminate the license plate. It is generally used to assist police in nighttime tracking and surveillance operations. 3. The installation of car license plate lights is very simple. The screw-shaped bulb is installed above the rear license plate, serving both illumination and decorative purposes.
2
4
Share

Do Tires Have a Right and Wrong Side?

The distinction between the right and wrong sides of a tire is primarily determined by the tire tread pattern. If the tire has an asymmetric tread or is a unidirectional tire, then it will have a right and wrong side. However, if the tread is symmetrical, the tire does not have a right or wrong side. Precautions for tire installation are as follows: 1. When installing the tire, strictly follow the specified installation direction. Failure to do so will not only affect the tire's drainage performance but also interfere with its noise reduction and grip. In severe cases, it may even cause the vehicle to pull to one side or become unstable, posing a safety hazard. 2. After installing the tire, perform a safety test before driving.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.