···
Log in / Register

What is the 0-100km/h acceleration test for the Accord Hybrid?

4 Answers
Scott
07/24/25 12:28pm
Accord Hybrid 0-100km/h acceleration test involves adjusting to sport mode. Below are some details about the acceleration test: 1. Accord: The 2018 tenth-generation Accord Hybrid exhibits minimal lift-off during initial acceleration, and the front wheels do not show any signs of slippage at the start. 2. Acceleration Test: During the test, ESP was turned off, sport mode was engaged, and the car was put in D gear. The G-force reached 0.5G immediately after launch, peaking at around 1 second. The final 0-100km/h acceleration time for the tenth-generation Accord was recorded at 8.25 seconds. Its power performance is not as strong as the high-power gasoline version.
Was this review help?
6
3
Share
McGiselle
08/11/25 3:09am
I specialize in automotive technology and am very familiar with the 0-100 km/h acceleration test for the Accord Hybrid. Simply put, this test measures the time it takes for the car to accelerate from zero to 100 kilometers per hour, which is used to evaluate its power performance. The Accord Hybrid uses a combination of a 2.0-liter engine and an electric motor, which provides high torque immediately upon startup, making the initial acceleration very agile. The official data is around 7.5 seconds, faster than some pure gasoline cars I've tested, and it's smooth without any jerking. For accurate results, the test must be conducted on a flat, dry road, and it can also be affected by temperature and battery charge level. If you're a hybrid owner, you'll find this acceleration time particularly useful for overtaking in the city, all while saving fuel. The 0-100 km/h acceleration is crucial for driving safety—slow response during rapid acceleration can be dangerous. The Accord Hybrid optimizes energy distribution through its i-MMD system, ensuring acceleration is both fast and efficient. In summary, this test is one of the essential metrics to consider before purchasing a car, helping people determine if the vehicle is reliable and practical.
Was this review help?
5
0
Share
Expand All
McHarley
09/25/25 5:14am
As an Accord Hybrid owner, I personally conducted a 0-100 km/h acceleration test. It was on a weekend on a suburban road - from a standstill, I floored the accelerator and the car surged forward instantly, feeling like being pushed by an invisible force, reaching 100 km/h in just seconds. I timed it at about 7.5 seconds, significantly quicker than the previous gasoline Accord. The electric motor delivers tremendous low-end torque with zero lag and operates silently. In daily driving, I can easily pull away from others when lights turn green, and highway overtaking feels confident with no power drop. The test results reinforced my belief in this car's fuel efficiency and practicality - my annual average consumption is around 5L/100km. The Accord Hybrid's smooth acceleration stems from its intelligent powertrain that seamlessly coordinates the engine and motor. The 0-100 km/h time isn't just a number - it reflects the actual driving experience: smooth, safe, and sufficient. For anyone considering a hybrid, I recommend trying this test yourself - the data is authentic and reliable.
Was this review help?
2
0
Share
Expand All
AaronRose
11/08/25 7:22am
I'm a car performance enthusiast specializing in testing. The 0-100 km/h acceleration test, simply put, measures the sprint time from zero to one hundred. The official figure for the Accord Hybrid is 7.5 seconds, and real-world tests are largely consistent. The hybrid's advantage lies in the electric motor's high torque, delivering thrust instantly from standstill without turbo lag. I've tested it on highways and mountain roads—the acceleration feels strong but not aggressive, as it's not positioned as a sports car. Compared to pure electric or turbocharged cars, it leans towards being mild and fuel-efficient. During testing, ensuring proper vehicle weight and tire pressure is crucial, or the results can vary significantly. The acceleration time affects driving pleasure, and the Accord Hybrid delivers enough for daily use.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Will the Haval H6 automatically lock when the driver leaves?

Haval H6 will automatically lock after the owner leaves. Here are the specific details about the Haval H6: 1. Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: a 1.5T and a 2.0T. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm, while the 2.0T engine delivers a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily adjusts the valve opening and closing time, valve lift, and duration, ensuring sufficient air intake under various engine conditions, thereby improving engine efficiency.
19
0
Share

What are the tips for novice drivers driving on national highways?

Novice drivers driving on national highways should pay attention to the following tips: The most important thing is to adjust your driving mindset, drive according to regulations, and display a novice driver sign. Additionally, avoid driving behind large trucks for extended periods. Since the road conditions on national highways can be complex, always be prepared to slow down. Novice drivers should note the following when driving on national highways: 1. Drive as close to the center line as possible: When there are no other vehicles, try to drive near the center line, positioning yourself as if you are sitting on the center line. This provides more room to maneuver in case of unexpected situations on either side. 2. Remember to signal when overtaking: When overtaking, remember to use your turn signals and honk the horn in a short-long-short pattern, which sounds more friendly. Also, flash your headlights to alert the driver in front. 3. Slow down when approaching villages: Always reduce speed when passing through villages, as villagers may not be fully aware of traffic rules. 4. Avoid picking up strangers: When driving in unfamiliar areas, try not to give rides to strangers flagging you down.
1
5
Share

What are the reasons for the JMC SVS light being on and diesel engine power loss?

Here are the specific reasons for the JMC SVS light being on and diesel engine power loss: 1. Poor engine combustion state. 2. Engine knocking. 3. Poor quality of vehicle fuel. 4. Dirty engine cylinder interior with accumulated carbon deposits. 5. The electronic control unit cannot obtain engine data. Here is extended information about the JMC SVS light: 1. Function: The car SVS light is similar to the engine fault light. When the SVS indicator is on, it indicates that the engine control unit has detected an error signal from a sensor or that it is beyond the usage standard. When the ignition switch is turned on, the car SVS indicator light will come on for an automatic check and will turn off automatically after a few seconds. 2. Working mode: When the vehicle's ignition key is turned on, the onboard computer will perform a self-check and this light will come on, and it will turn off after the vehicle is started; when the engine ECU detects a fault, the SVS light will come on; if this light comes on while the vehicle is in motion, it indicates that there is a fault with the vehicle's engine.
6
1
Share

What is the correct method for defogging a car?

Methods for defogging a car are as follows: 1. Air conditioning defogging: Turn on the front window defogging mode, set the fan speed to maximum, turn on the A/C switch, and then adjust the temperature to the lowest setting. The fog on the glass will be eliminated shortly. Additionally, some models are equipped with electric heating for the rear windshield and exterior rearview mirrors. Simply click the switch to turn it on, and the fog will be cleared in about a minute. 2. Air convection: Opening the windows can increase air convection, reduce the temperature difference between the inside and outside of the car, and weaken the conditions for fog formation. 3. Defogging spray: When using, simply spray it evenly on the glass surface and then wipe it clean with a dry towel. The principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules and causing fog droplets to coalesce into larger droplets, thus not obstructing vision. This can also be used on other car glass surfaces, especially the exterior rearview mirrors. 4. Homemade defogging spray with dish soap: Mix dish soap and water in a 1:6 ratio in a bottle, spray and wipe before traveling. The effect is comparable to commercially available defogging sprays, though the durability is slightly inferior.
5
2
Share

How to Clear the Car Maintenance Reminder?

Clearing the car maintenance reminder can be done as follows: 1. First, turn off the car's ignition, then press and hold the SET button on the right side of the car's dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Then release the "SET" button and press it once more. 4. Finally, turn off the ignition and then turn it back on to complete the process of clearing the maintenance reminder. Additional Information: 1. During every routine car maintenance, the oil filter must be replaced. For cars driven in areas that are not particularly dusty, the air filter can generally last for 20,000 kilometers, requiring only cleaning at the 7,500-kilometer mark. The lifespan of the fuel filter depends on the quality of the fuel used. If you consistently refuel at reputable gas stations and do not experience fuel supply issues, you can consider replacing it after more than 20,000 kilometers. 2. Under normal usage conditions, brake pads can last for 30,000 to 40,000 kilometers, and the original battery can last for 3 to 4 years. There are various types of spark plugs: standard nickel alloy spark plugs can last for 20,000 to 30,000 kilometers, platinum spark plugs for 80,000 to 100,000 kilometers, and iridium spark plugs for 30,000 to 40,000 kilometers.
15
0
Share

Why does the engine RPM drop slowly when releasing the throttle?

Reasons for slow RPM drop when releasing the throttle are as follows: 1. This may be caused by an over-rich air-fuel mixture in the engine, which can result from various factors; 2. It might be due to malfunctioning sensors. Proper engine operation relies on numerous sensors and electronic components - if certain sensors fail, it may cause abnormal engine performance. Below is relevant information about engine sensors: 1. Sensors around the engine include oxygen sensors, mass airflow sensors, intake air temperature sensors, camshaft position sensors, coolant temperature sensors, etc. 2. If any sensor malfunctions, it may cause the engine to exhibit an over-rich mixture condition, resulting in minimal RPM reduction when releasing the throttle pedal.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.