What is the 0-100 km/h acceleration time of the Trumpchi GS4?

What is the fuel consumption of the Nissan Yixuan 2.5?

Nissan Yixuan 2.5 has a Ministry of Industry and Information Technology (MIIT) fuel consumption rating of 10.5 liters per 100 kilometers. Actual fuel consumption is influenced by multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on real driving conditions. Methods to determine fuel consumption: You can determine fuel consumption through the car's dashboard, where F=full (representing full) and E=empty (representing empty). When the fuel tank warning light comes on, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial recorded mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology also significantly influence fuel consumption. Among vehicles with the same displacement, those with more advanced engine technology tend to be more fuel-efficient.

18

3

Share

Why can't the Volkswagen Lavida key be turned?

Lavida key can't be turned because: the steering wheel is in a locked state. Here are the specific reasons and solutions: 1. After pulling out the car key, if you turn the steering wheel left or right, the steering wheel self-locking function will be activated. The steering lock pin and steering column are engaged together, and the steering wheel cannot be moved. Even if you insert the key and try hard to turn it, it won't budge. 2. Gently turn the steering wheel left and right with your left hand while turning the key with your right hand. Note that these actions should be performed simultaneously to unlock it. Here is additional information about the steering wheel locking principle: 1. Through the rotation of the key, a steel pin is controlled by a spring. After the key is pulled out, as long as the steering wheel is turned, the pin will pop into a pre-drilled hole, locking the steering wheel to ensure it cannot be turned. 2. Every time the engine is turned off and the key is pulled out, the steering wheel is in a ready-to-lock state. As long as the steering wheel is turned, it will be locked immediately, preventing thieves from driving the car away. This means that once a thief enters the car and turns the steering wheel, the steering wheel will be locked. Even if the car is started, it can only turn in place, possibly discouraging the thief from stealing the car. 3. In the steering wheel locked state, the steering wheel cannot be turned, the key cannot be turned, and the car cannot be started, thereby achieving anti-theft functionality.

19

4

Share

How often should the annual inspection sticker be replaced?

Two years. New vehicles are exempt from annual inspections for the first six years, but the annual inspection sticker and environmental protection label on the vehicle need to be collected and replaced every two years. Below is additional information about vehicle annual inspections: 1. Timeframe: For passenger cars and blue-license minivans, within the first six years after registration, inspections are required every two years; after six years, inspections are required annually; after fifteen years, inspections are required twice a year. For trucks, inspections are required annually after registration, and after ten years, inspections are required twice a year. 2. Legal basis: "Road Traffic Safety Law of the People's Republic of China," "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China." 3. Initial inspection content: The initial inspection aims to verify whether the vehicle meets the conditions for license plate issuance. The inspection includes: (1) Checking if the vehicle has a user manual, certificate of conformity (for imported vehicles, the commodity inspection certificate), and if the factory sample markings on the vehicle body are complete. (2) Measuring the internal and external dimensions, wheelbase, and axle track of the vehicle. Specific measurements include vehicle length, width, height, cargo compartment height and area, wheelbase, and axle track. (3) Conducting inspections item by item according to technical standards. Upon passing, fill out the "Initial Inspection and Modification Registration Form for Motor Vehicles," and record the curb weight, load capacity, passenger capacity, and driver's seat capacity as specified by the manufacturer.

17

2

Share

What brand is the tire model of the new LaCrosse?

The tire model of the new LaCrosse is Yokohama brand. Tire specifications: The tire specifications for the Buick new LaCrosse are 235/50R18 and 245/45R19. The 2019 model added a Premium version, which in terms of configuration is similar to the old Elite version, but also includes passive pedestrian protection and map navigation functions. The Premium version is similar to the old Luxury version, removing the electric backrest adjustment for the rear seats and adding an in-car air purification system. The top-tier Avenir version adds an in-car air purification system based on the old Avenir version. Exterior design: In terms of exterior design, the redesigned wing-shaped grille has a larger opening area, and the grille is equipped with an active grille shutter. The body part has minimal changes compared to the old model, with the dual waistline design extending from the front fenders to the C-pillar. The rear emblem features an additional horizontal chrome strip that extends into the taillights on both sides, enhancing the three-dimensional feel of the rear. For the interior, the black area above the center console is covered with soft plastic and leather, with wood grain trim in the middle. The design of the steering wheel and instrument panel remains unchanged, with consistent layout of function buttons.

18

3

Share

What are the reasons for frequent failures in the audio circuit of the new Santana?

The frequent failure in the audio circuit of the new Santana is that the horn does not sound. Fault reasons: There is leakage inside the electric horn, causing excessive current during operation and blowing fuse S16. There is a grounding issue in the electric horn circuit. Handling method: Check the wiring inside the central junction box and the wiring between the junction box and the electric horn. Remove fuse S16, connect one end of a 12V test light to the positive terminal of the battery and the other end to the output terminal of the fuse box. Then, manually move the wiring harness inside the junction box back and forth. If the test light does not illuminate, it indicates there is no grounding fault in the wiring inside the junction box. Inspect the wiring between the junction box and the electric horn starting from the installation position of the electric horn (radiator bracket). Follow the wiring and discover an additional wire connected to the electric horn circuit. Tracing this wire to the right rear of the engine compartment reveals it is connected to a larger electric horn. When pressing the horn button, this larger horn does not sound. Upon careful inspection of the horn's connecting wire, it is found that part of the wire's insulation has peeled off, exposing the copper wire. Moving the wire causes the exposed part to come into contact with the vehicle's metal body, which is the reason for the blowing of fuse S16.

18

0

Share

What is the reason for the Baojun 730 getting stuck immediately when stepping on the clutch while engaging reverse gear?

Baojun 730 getting stuck immediately when stepping on the clutch while engaging reverse gear is due to clutch failure. Clutch failure: Long-term use of the clutch pedal, lack of lubrication, incomplete engagement of the sliding friction clutch, sliding friction, wear and tear of the clutch and burning of the clutch and pressure plate, keeping the foot on the clutch pedal for a long time while driving, causing clutch slippage, clutch disc burning, etc. In severe cases, it can even cause burning and scratching of the clutch pressure plate and flywheel end face, leading to faults such as the clutch pressure spring annealing. At the same time, it can also lead to increased fuel consumption, vehicle wear, and higher driving costs. Excessive working temperature causing overheating, lack of lubrication leading to wear, too small free travel or excessive load cycles, whether the separation lever is adjusted evenly, and whether the separation bearing return spring is in good condition also have a significant impact on the damage of the clutch separation bearing. Power combination: 6-speed wet dual-clutch transmission (DCT) + 1.5T turbocharged engine. The new Baojun 730 automatic model is equipped with a 6-speed wet dual-clutch transmission. This automatic transmission can withstand a maximum torque of 360Nm, and is paired with BorgWarner's pre-engagement technology and dual-clutch adaptive control, allowing quick gear shifts in 0.2 seconds. The powertrain still features the P-Tec DVVT 1.5T turbocharged engine, which delivers a maximum power of 150 horsepower (110 kW) at 5500 rpm and a maximum torque of 230 Nm at 2000-3800 rpm.

1

2

Share

What is the 0-100 km/h acceleration time of the Trumpchi GS4?

What is the fuel consumption of the Nissan Yixuan 2.5?

Why can't the Volkswagen Lavida key be turned?

How often should the annual inspection sticker be replaced?

What brand is the tire model of the new LaCrosse?

What are the reasons for frequent failures in the audio circuit of the new Santana?

What is the reason for the Baojun 730 getting stuck immediately when stepping on the clutch while engaging reverse gear?

At what temperature does the Chery Tiggo 3's fan start working?

Is the Mercedes-Benz GLA a Three-Cylinder Engine?

What Are the Basic Structure and Functions of a Car?

What Causes Idle Vibration in Haval H2?